The ultimate Mini JRX2 thread
-
- Approved Member
- Posts: 942
- Joined: Wed Aug 07, 2013 9:25 am
- Location: Oregon Coast
- Has thanked: 100 times
- Been thanked: 206 times
Re: Losi Mini JRX2 coming soon
That will look just perfect on front of a Pro or Junior painted buggy
Thanks Dean!
Thanks Dean!
Losi - Jrx2, Pro, Jr2, Pro SE, JrxT, JrT, LXT, NXT, XXKE, XXTG+
Mini - T, LST, LST2, Crawler
Micro - Trekker, SCT, T
Crawlers - Trx4 Defender, Bootleg Bruiser Shelf Queen
-Bashers under contruction- Jrx2
Mini - T, LST, LST2, Crawler
Micro - Trekker, SCT, T
Crawlers - Trx4 Defender, Bootleg Bruiser Shelf Queen
-Bashers under contruction- Jrx2
-
- Approved Member
- Posts: 942
- Joined: Wed Aug 07, 2013 9:25 am
- Location: Oregon Coast
- Has thanked: 100 times
- Been thanked: 206 times
Re: Losi Mini JRX2 coming soon
Do it, I am running cheap Ender 3 pros and I have made more things then I could count. From RC bits to spacers for my Mothers mobility scooter to wiper rack bushings for a vintage VW
Losi - Jrx2, Pro, Jr2, Pro SE, JrxT, JrT, LXT, NXT, XXKE, XXTG+
Mini - T, LST, LST2, Crawler
Micro - Trekker, SCT, T
Crawlers - Trx4 Defender, Bootleg Bruiser Shelf Queen
-Bashers under contruction- Jrx2
Mini - T, LST, LST2, Crawler
Micro - Trekker, SCT, T
Crawlers - Trx4 Defender, Bootleg Bruiser Shelf Queen
-Bashers under contruction- Jrx2
-
- Approved Member
- Posts: 107
- Joined: Thu Jul 24, 2008 1:40 am
- Location: Massachusetts
- Has thanked: 178 times
- Been thanked: 46 times
Re: Losi Mini JRX2 coming soon
I’ll change the orientation so it’s less likely to break. A front collision now and it will snap on a print line.
-
- Approved Member
- Posts: 107
- Joined: Thu Jul 24, 2008 1:40 am
- Location: Massachusetts
- Has thanked: 178 times
- Been thanked: 46 times
Re: Losi Mini JRX2 coming soon
It is not all that hard. I have a Sovol SV01 - Nearly plug and play. Number 1 thing - Level the bed!
- RCveteran
- Approved Member
- Posts: 1364
- Joined: Sat Jul 10, 2010 10:48 pm
- Has thanked: 4 times
- Been thanked: 102 times
Re: Losi Mini JRX2 coming soon
Every time I think I am ready. I get overwhelmed and the forums point to too much money for a guy who will print a gas can for a crawler or a mini X2 part and I give up.
Right now I work on a Chromebook and think I would need a PC, at least a cheap one as I understand as well to do file transfers.
I had my eye on this one recently as it seems easy set up. I don't want to get overwhelmed in set up and futzing around and lose interest. I almost want a RTR to keep it RC like so I can learn from there.
https://www.amazon.com/ANYCUBIC-Mega-S-Extruder-Suspended-Filament/dp/B07J9QGP7S/ref=sr_1_1_sspa?crid=2T4E24IANWJ1Q&keywords=3d%2Bprinters&qid=1655835483&s=industrial&sprefix=3d%2Bprinters%2Cindustrial%2C152&sr=1-1-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExRkkwTkpPMDM3OEVJJmVuY3J5cHRlZElkPUEwMzIxODA2MUoxVUw0QVBPRDFFViZlbmNyeXB0ZWRBZElkPUEwNzU3MjM5Mk00UjhYVFdFTTkzUSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU&th=1
- GoMachV
- Approved Member
- Posts: 11606
- Joined: Mon Apr 30, 2012 2:31 am
- Location: Twin Falls, ID
- Has thanked: 911 times
- Been thanked: 2809 times
Re: Losi Mini JRX2 coming soon
Hot off the printer, heavily modified Kingroon with all the fixins
I usually dont cheat with a raft but I knew I was gonna be away for most of its print and didn’t want one to cause them all to fail
I usually dont cheat with a raft but I knew I was gonna be away for most of its print and didn’t want one to cause them all to fail
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- RCveteran
- Approved Member
- Posts: 1364
- Joined: Sat Jul 10, 2010 10:48 pm
- Has thanked: 4 times
- Been thanked: 102 times
Re: Losi Mini JRX2 coming soon
$200 max, pick my printer. Easy set up, compact would be ideal for my space. Won't print anything bigger than a 1/10 wheel. Easy set up, work out of box without obtaining a computer science degree and having to read 56 forums that will confuse me more.
I like the size of this one for instance.
https://www.amazon.com/Monoprice-Calibration-Assembled-Preloaded-Printable/dp/B07CJQ3D6L/ref=psdc_6066127011_t3_B09PBHDLHB?th=1
I like the size of this one for instance.
https://www.amazon.com/Monoprice-Calibration-Assembled-Preloaded-Printable/dp/B07CJQ3D6L/ref=psdc_6066127011_t3_B09PBHDLHB?th=1
- GoMachV
- Approved Member
- Posts: 11606
- Joined: Mon Apr 30, 2012 2:31 am
- Location: Twin Falls, ID
- Has thanked: 911 times
- Been thanked: 2809 times
Re: Losi Mini JRX2 coming soon
Ender 3 in that price range. Joey King got one… then got another… and is printing like a madman. Creality is a hobby printer and you will have failures but it’s the easiest with the most support and super easy to get parts. My kingroon was way cheaper, but I have put well over $400 into it and it’s the cheapest printer I own after all mods are accounted for. It’s a hobby just like this.
I don’t have a ender 3. I do have a Ender 5 (highly recommend but out of your budget), ender 5+, 2 Kingroons, and a Pulse. The ender 3 prints just like a 5, just a little more setup in getting things square. You can’t go wrong.
My first was a monoprice. I got a year out of it until I went looking for a better unit. They won’t take you to the next level like a creality.
I don’t have a ender 3. I do have a Ender 5 (highly recommend but out of your budget), ender 5+, 2 Kingroons, and a Pulse. The ender 3 prints just like a 5, just a little more setup in getting things square. You can’t go wrong.
My first was a monoprice. I got a year out of it until I went looking for a better unit. They won’t take you to the next level like a creality.
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- RCveteran
- Approved Member
- Posts: 1364
- Joined: Sat Jul 10, 2010 10:48 pm
- Has thanked: 4 times
- Been thanked: 102 times
Re: Losi Mini JRX2 coming soon
Got it, reading up on the ender 3 now. Thanks. I get it's a hobby and I can grow but I also know me. I am not passionate about it say like RC. So if I don't get going and learn the basics hands on I will not grow, I will get frustrated. I need it to work and then I learn and go down the wormhole.
- GoMachV
- Approved Member
- Posts: 11606
- Joined: Mon Apr 30, 2012 2:31 am
- Location: Twin Falls, ID
- Has thanked: 911 times
- Been thanked: 2809 times
Re: Losi Mini JRX2 coming soon
If you are near a Microcenter, I want to say Joey got his Enders for like $110! I’m sure it was a special deal but it’s so cheap for that printer
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- OptimaZe
- Approved Member
- Posts: 35
- Joined: Tue Apr 15, 2014 12:54 pm
- Location: Holly MI
- Has thanked: 59 times
- Been thanked: 7 times
Re: Losi Mini JRX2 coming soon
Ender 3 is a good start. I have a few printers and use the Ender 3 regularly for several years now. Learning 3D printing isn't all that difficult, and you can use your Chromebook to slice your files. You'll just have to install the software.RCveteran wrote: ↑Tue Jun 21, 2022 7:13 pm Got it, reading up on the ender 3 now. Thanks. I get it's a hobby and I can grow but I also know me. I am not passionate about it say like RC. So if I don't get going and learn the basics hands on I will not grow, I will get frustrated. I need it to work and then I learn and go down the wormhole.
Holly RC Club
On The RCP
On The RCP
- RCveteran
- Approved Member
- Posts: 1364
- Joined: Sat Jul 10, 2010 10:48 pm
- Has thanked: 4 times
- Been thanked: 102 times
Re: Losi Mini JRX2 coming soon
Thanks everyone, I will read and do have a Microcenter relatively nearby. Now back to mini X2's. When can we expect the JRXT and Pro Se conversions?
- GoMachV
- Approved Member
- Posts: 11606
- Joined: Mon Apr 30, 2012 2:31 am
- Location: Twin Falls, ID
- Has thanked: 911 times
- Been thanked: 2809 times
Re: Losi Mini JRX2 coming soon
Lots of roadblocks there- for jrxt and pro a proper chassis with kickup suffers the same problems as the full size ones- it’s crazy expensive. The pro se will probably be easiest as clm has the chassis posted above and I already have towers.
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
-
- Similar Topics
- Replies
- Views
- Last post
-
- 37 Replies
- 12509 Views
-
Last post by jcwrks
-
- 3 Replies
- 1841 Views
-
Last post by mtbkym01
-
- 2 Replies
- 814 Views
-
Last post by JK Racing
-
- 31 Replies
- 4979 Views
-
Last post by Lavigna
-
- 6 Replies
- 1720 Views
-
Last post by RC10th
-
- 3 Replies
- 328 Views
-
Last post by isaidme
-
- 28 Replies
- 2308 Views
-
Last post by Heffay
-
- 90 Replies
- 12685 Views
-
Last post by huminski
Who is online
Users browsing this forum: CommonCrawl [Bot] and 1 guest