** Build of the Month Contest - October 2022 ** - Winner - Romulus22

[scr8p]

Open To Any Manufacturer!

OK, this will be the thread for the October 2022 Build of the Month Contest.

Refresh yourself with the rules before entering - http://www.rc10talk.com/viewtopic.php?f=98&t=35923

Please remember, no chit chat until all of the entries are locked in so they can stay grouped together.

GOOD LUCK!!!

************************************************************************

** Place Holders **

If you would like to enter the contest, create a post as a "place holder". DO NOT POST ANY PICS. You have until the 5th of the month to lock in a spot (10 entries max). You will then have 2 days to edit your post and attach the pics of your entry. The poll will be started on the night of the 7th. If you have not submitted your pics by then you will be removed from the contest.

[MotoObscura]

My 2022 VONATS RC10 Team Car with:

• RPM Worlds Front End, RPM bumper

• Hand Dremeled front and rear carbon fiber shock towers

• NIX RPM Bandit rear arm conversion

• Airtronics 94737 Servo, Hobbywing XR10 Justock ESC, Trinity XFactor 17.5 motor

• JConcepts Octagon tires, JConcepts Mono Wheels, JConcepts Protector body

[Retro rc]

My mid cougar modern runner

Build thread here

https://www.rc10talk.com/viewtopic.php?f=28&t=46892

[romulus22]

[juicedcoupe]

RC10 Graphite, six gear.

Factory Works towers, Vintage RC battery strap, and V2 truck shocks. Splash in some blue hardware and a JConcepts motor plate.

JConcepts body and repo Jammin wing. Paint is actually blue but the color change shows purple in sunlight.

JC Racing wheels and rear tires, with Losi fronts.

Novak esc and receiver, Futaba mini servo, and a Reedy stock motor.

Click on pics for better resolution.

[JosephS]

This is my Chris vanAir 2016 rc10t build. https://site.petitrc.com/setup/associated/setuprc10t/RC10T_ChrisVanAir_HRH20161128/
I have a build thread on this one. “Sure. I’ll start out easy. This is basically a box stock rc10t. How hard could it be?”

The answer is quite.

Very thankfully I received from help from Chris on his truck.

Basically this is a zebra rc10t set up according to the spec sheet.
Body painted by Jeremy off the grid designs.

2stage foams from someone in Israel
Carvers and filpouts( nos from a place in the San Fernando valley)
Thorp delrin idler
Ghee shock pistons
Hobbywing justock
Reedy m3 17.5 254

I think I basically made this 3x over as this started with a completely new chassis as the basis.

[threesheds]

Hirobo Zerda : More of a rescue and rebuild than "build" but described in zerda from wreck to runner thread. FS A3 receiver and generic ESC, new steering servo, Alien Mid deck and restored front 4WD with drive cups and dogbones. Hirobo Toyota Celica wheels. Zerda wheels that came with it are very basic design but ok for on the shelf. A 12mm hex option can be fitted for running. Also Rockn City wheel option.
Kyosho tomahawk driver until zerda repro driver from Penguin gets painted

[scr8p]

Poll is up. Good luck!

[Frankentruck]

Is this an RC10T converted to gas?
.

[scr8p]

It's an early RC10GT. Not a conversion.

[Chewbacca]

It's an early RC10GT. Not a conversion.

I was going to ask the exact same question. Never saw an early GT with the original RC10 Tub before, you need to show us more...

[scr8p]

Wait.... my bad. That isn't the GT tub. Didn't see it was the standard tub.

[romulus22]

Is this an RC10T converted to gas?

Pretty sure all of the pictures in the build thread are dead links now. But here’s the thread. I recently re-acquired it after I sold it.

https://www.rc10talk.com/viewtopic.php?f=36&t=29823&hilit=Gas+conversion

[Dadio]

I do likes me a Zerda

[Retro rc]

Yay at least I got 1 vote and it wasn’t mine