Tamiya "Turbo" Frog
-
- Approved Member
- Posts: 52
- Joined: Sat May 02, 2020 8:28 pm
- Has thanked: 17 times
- Been thanked: 32 times
Tamiya "Turbo" Frog
Classic RC10 rival, "Turbo" Frog complete. Mods inspired by re-re Turbo Scorpion. Livery inspired by Jammin Jay RC10 and Frog boxart (behind Frog) .
Custom made parts...
*Gearbox mount +10mm wheelbase.
*Rear arm hanger +10mm wheelbase.
*Rear wing mount/rear bumper/body protector.
*Front arm extenders. +20mm front width.
+Front shock towers.
*Front bumper.
*Large bumper reinforcing fiber plate.
*Stealth switch mount.
*Battery harness clip/rod.
*Rear wing.
Custom mods...
*extended rear shock length +10mm.
*Extended steering rods +10mm each side.
*Front shocks.
*Bumper mount front angle.
*Radius arm relocation.
*Front axle screwed into arm.
https://www.instagram.com/p/Ci9autQPXCn/?igshid=MDJmNzVkMjY=
Custom made parts...
*Gearbox mount +10mm wheelbase.
*Rear arm hanger +10mm wheelbase.
*Rear wing mount/rear bumper/body protector.
*Front arm extenders. +20mm front width.
+Front shock towers.
*Front bumper.
*Large bumper reinforcing fiber plate.
*Stealth switch mount.
*Battery harness clip/rod.
*Rear wing.
Custom mods...
*extended rear shock length +10mm.
*Extended steering rods +10mm each side.
*Front shocks.
*Bumper mount front angle.
*Radius arm relocation.
*Front axle screwed into arm.
https://www.instagram.com/p/Ci9autQPXCn/?igshid=MDJmNzVkMjY=
-
- Approved Member
- Posts: 3948
- Joined: Sun Apr 24, 2016 6:21 pm
- Location: Guildford UK
- Has thanked: 2437 times
- Been thanked: 2040 times
Re: Tamiya "Turbo" Frog
I like that, pretty cool stuff.
If a jobs not worth doing then its certainly not worth doing well.
A problem shared is a problem halved but an advantage shared is no advantage at all.
A problem shared is a problem halved but an advantage shared is no advantage at all.
- GeneralZod
- Approved Member
- Posts: 409
- Joined: Mon Dec 10, 2012 12:19 am
- Location: Colorado
- Has thanked: 145 times
- Been thanked: 153 times
Re: Tamiya "Turbo" Frog
That is a beautiful ! I still need to get one after all these years. Such an iconic car.
-
- Approved Member
- Posts: 52
- Joined: Sat May 02, 2020 8:28 pm
- Has thanked: 17 times
- Been thanked: 32 times
Re: Tamiya "Turbo" Frog
I've had it out with a 27t brushed stock motor and it handled it nicely. Swapping for a brushless 21.5t, then it'll really put it to the test.
-
- Approved Member
- Posts: 121
- Joined: Sat Sep 09, 2017 3:01 pm
- Location: chesterfield UK
- Has thanked: 7 times
- Been thanked: 17 times
Re: Tamiya "Turbo" Frog
I like the gearbox extension mounts. Might have to steal that idea for my modified frog!
- TokyoProf
- Approved Member
- Posts: 312
- Joined: Wed Oct 16, 2019 10:13 pm
- Location: Tokyo, Japan
- Has thanked: 499 times
- Been thanked: 368 times
Re: Tamiya "Turbo" Frog
Impressive work on the chassis and body and wing.
"Everyone is capable of so much more than they think they are." - Johnny Kim - Navy Seal, Doctor, Astronaut
-
- Approved Member
- Posts: 52
- Joined: Sat May 02, 2020 8:28 pm
- Has thanked: 17 times
- Been thanked: 32 times
-
- Approved Member
- Posts: 121
- Joined: Sat Sep 09, 2017 3:01 pm
- Location: chesterfield UK
- Has thanked: 7 times
- Been thanked: 17 times
Re: Tamiya "Turbo" Frog
Will do. Finished my modified grasshopper so time to revisit the frog.
I modified the rear end to put the rear arms on bearings, and the diff has the screw mod. Main weak area is the front end. I put avante shocks on it, but it's still terrible, so I'll prob a my swap it all out for something else. I had been wondering how to give it a bit more wheelbase, and your idea is a nice simple solution. The best solutions normally are!
-
- Approved Member
- Posts: 52
- Joined: Sat May 02, 2020 8:28 pm
- Has thanked: 17 times
- Been thanked: 32 times
Re: Tamiya "Turbo" Frog
I`ve used a shaft + bushing arrangement. No play at all now...graemevw wrote: βSun Jan 22, 2023 12:06 pmWill do. Finished my modified grasshopper so time to revisit the frog.
I modified the rear end to put the rear arms on bearings, and the diff has the screw mod. Main weak area is the front end. I put avante shocks on it, but it's still terrible, so I'll prob a my swap it all out for something else. I had been wondering how to give it a bit more wheelbase, and your idea is a nice simple solution. The best solutions normally are!
-
- Approved Member
- Posts: 52
- Joined: Sat May 02, 2020 8:28 pm
- Has thanked: 17 times
- Been thanked: 32 times
Re: Tamiya "Turbo" Frog
I`ve used a shaft + bushing arrangement. No play at all now...graemevw wrote: βSun Jan 22, 2023 12:06 pmWill do. Finished my modified grasshopper so time to revisit the frog.
I modified the rear end to put the rear arms on bearings, and the diff has the screw mod. Main weak area is the front end. I put avante shocks on it, but it's still terrible, so I'll prob a my swap it all out for something else. I had been wondering how to give it a bit more wheelbase, and your idea is a nice simple solution. The best solutions normally are!
- TheDiamondOne
- Approved Member
- Posts: 446
- Joined: Fri Nov 12, 2010 7:26 pm
- Location: Energy, IL
- Has thanked: 1738 times
- Been thanked: 458 times
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3 Replies
- 1331 Views
-
Last post by ireg
-
- 3 Replies
- 1134 Views
-
Last post by mrlexan
-
- 5 Replies
- 835 Views
-
Last post by airdreams1
-
- 5 Replies
- 1889 Views
-
Last post by cooltoys
-
- 0 Replies
- 1436 Views
-
Last post by chevron
-
- 12 Replies
- 3309 Views
-
Last post by SMOKE-DOG
-
- 4 Replies
- 1748 Views
-
Last post by slotcarrod
-
- 2 Replies
- 773 Views
-
Last post by mirrorman
Who is online
Users browsing this forum: Amazon [Bot], CommonCrawl [Bot] and 5 guests