juicedcoupe wrote: ↑Tue Mar 21, 2023 12:15 am
....anti-seize. I think that stuff is growing in my house now. I'm having to use contact cleaner (~$10 a can) to remove it.
A little dab'l do ya! A pinhead amount is applied to spark plug threads......at end of job the stuff is on the ceiling and you look like the tinman.
I am not laughing at the $10/can solvent. I was addicted to that stuff at the shop (addicted to it's cleaning properties) Nonetheless, it was an expensive habit.
YouTube documentaries that offer the answer but just leave it a mystery at the end of just a lot of speculation ,just a waist of time , why bother " smash that dislike button "
If a jobs not worth doing then its certainly not worth doing well.
A problem shared is a problem halved but an advantage shared is no advantage at all.
Dadio wrote: ↑Tue Mar 21, 2023 7:25 am
YouTube documentaries that offer the answer but just leave it a mystery at the end of just a lot of speculation ,just a waist of time , why bother " smash that dislike button "
Welcome to Youtube-as-a-career.... lots of time saying nothing. I watched a video the other day, where the channel discussed something being shown on another channel, which was debunking something being shown on a third channel about a fourth channel.... multi-level marketing, lots of video minutes, no new content.
That one irritates me too.
Alex
Osiris is the key.
"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken
Look out for Todd K. - he's a convicted serial killer!!!
Dadio wrote: ↑Tue Mar 21, 2023 7:25 am
YouTube documentaries that offer the answer but just leave it a mystery at the end of just a lot of speculation ,just a waist of time , why bother " smash that dislike button "
Welcome to Youtube-as-a-career.... lots of time saying nothing. I watched a video the other day, where the channel discussed something being shown on another channel, which was debunking something being shown on a third channel about a fourth channel.... multi-level marketing, lots of video minutes, no new content.
That one irritates me too.
Alex
But you watched it
If a jobs not worth doing then its certainly not worth doing well.
A problem shared is a problem halved but an advantage shared is no advantage at all.
Dadio wrote: ↑Tue Mar 21, 2023 7:25 am
YouTube documentaries that offer the answer but just leave it a mystery at the end of just a lot of speculation ,just a waist of time , why bother " smash that dislike button "
Welcome to Youtube-as-a-career.... lots of time saying nothing. I watched a video the other day, where the channel discussed something being shown on another channel, which was debunking something being shown on a third channel about a fourth channel.... multi-level marketing, lots of video minutes, no new content.
That one irritates me too.
Alex
But you watched it
Twice, because he is serious.
Always looking for new and interesting ways to waste money.
eBay sellers that don't care if the item gets damaged in shipping really piss me off. A rare orange can Race Prep modified motor bundled with a Dirtytrax B-last ESC and a couple of servos? Sure, throw them all in a Ziploc bag, stick em in an envelope and send it on it's way. I guarantee the servos are what bent the fin tips on the ESC. Sure the motor had some scars before shipping, but it didn't need to get banged up worse over a 1000 mile delivery. Argh!!!
Frankensteined RC10T3 / Franky Jr RC10GT-e (x2) / A+ stamp / Toy Story RC / Graphite replica / B1.5 BFG 5LTi / Clonewald / Hyper Hornet
"I love the effort, but it sure looks like you took the long way around to a tub again"
Ebay again: Not being able to create a listing for Kyosho Nerf Bars because ebay's algorithm recognizes Nerf as a brand name, and for some reason having two brand names in the auction title is a problem.
Dadio wrote: ↑Tue Mar 21, 2023 7:25 am
YouTube documentaries that offer the answer but just leave it a mystery at the end of just a lot of speculation ,just a waist of time , why bother " smash that dislike button "
It's not just the documentaries, 99% of the "how to" vids are absolutely worthless. Most of them are by folks who have no idea what they're doing, the few you can find from "pros" or reasonably knowledgeable people tend to leave out the majority of useful info, but they sure can praddle on about nothing.
klavy69 wrote:... when I give you s&#t its a loan...I want it back!
While near the topic, YouTube shorts and Facebook shorts... Not only a waste of time as typically either the end seems to be cut off or they are simply pointless, but also hands down without a doubt some of the worst advise I've ever seen. Anything for a click.
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas Factory Works website
GoMachV wrote: ↑Wed Mar 29, 2023 2:44 pm
While near the topic, YouTube shorts and Facebook shorts... Not only a waste of time as typically either the end seems to be cut off or they are simply pointless, but also hands down without a doubt some of the worst advise I've ever seen. Anything for a click.
THIS RIGHT HERE.
Osiris is the key.
"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken
Look out for Todd K. - he's a convicted serial killer!!!
GoMachV wrote: ↑Wed Mar 29, 2023 2:44 pm
While near the topic, YouTube shorts and Facebook shorts... Not only a waste of time as typically either the end seems to be cut off or they are simply pointless, but also hands down without a doubt some of the worst advise I've ever seen. Anything for a click.
YT is demanding that content creators make shorts for their channels. One of the channels I watch just talked about this and he started a second channel just for the shorts, nothing else, and he's not intending to put them on his main channel because he claims that gets complaints from his viewers about them and that they go unwatched. But, YT demands them, so . . .
klavy69 wrote:... when I give you s&#t its a loan...I want it back!
I GOT MARRIED !!!!!!!!!!!!!!!! :lol: :lol: :lol: :lol: :lol: :lol: 8) 8) 8) 8) 8) 8) 8) 8) DON
Last post
Well stayed an extra day and man am i worn out,im home now and shes back at her home for a while.Shes dealing with her folks health issues.May haft find a bigger house now.lol .DON
So, now that I have a couple of club races and a big race on my car, I thought I would go over a few things that ARE needed if you intend to buy one soon.
First and foremost, Ball cups. Don't build your kit with the ballcups that come with it. They...
Last post
They have been offering the 4.1wc with big bores and +8 chassis and from what I have seen, has the same street price as a 4.2... But still need the slipper, bellcranks and carbon parts for rear hubs. So I don't get why anyone would buy a 4.1 right...
Well, After 37 years on the planet and never doing one of things I have always thought about and should have picked up in my teens or 20s, here's how I spend my Sat and Sun mornings. I have been doing some traveling to ride as well, at least when...
Just a few things to look at that might not be very common. I apologize for the spammy nature of our logo on the images.
Got this from Bolink. Cut from clear lexan with the gold bits. Was used as part of their display at shows. I'm told it's the...
Last post
Here's some junk that was close to the Dork missle on the shelf so I grabbed it. There are about 15 more of them with similar amounts of RC10 junk in them on the same shelf. A random sample of fun. Lotta of the really cool stuff is under the...
i used to read every single post. and now in every section there is at least 10 pages of posts that i've never opened...
whats the latest gossip? any more 'cat pee' stories or anything? 8)
i'm gonna try and post more or at least read more on the...
Last post
Ya definitely! Halgar and I have been preparing for the Walnut Classic without you but we can get you up to speed in time. Just to bring you up to speed I'm up to cracking 4 walnuts wiht my azz cheeks... Halgar found a new tplacement and its really...