The Official "What is it?" Thread

Need something identified? This is the place.

Moderators: scr8p, klavy69

User avatar
Diamond Dave
Super Member
Posts: 1502
Joined: Tue Nov 29, 2011 6:42 am
Location: Calgary
Has thanked: 578 times
Been thanked: 103 times

Re: The Official "What is it?" Thread

Post by Diamond Dave »

No manufacturer or brand markings anywhere, Aristo Craft Hitec servo hs-300 and an AM receiver hp-2rnb.

Tires have "Off-Roader" on them, Mabuchi 540-HS motor. Just not familiar with this design, I am thinking it is Futaba, but no idea what year or model.
20230805_175108.jpg
[/img
20230805_175018.jpg

User avatar
morrisey0
Super Member
Posts: 1342
Joined: Wed Jan 13, 2021 7:45 pm
Location: Richmond, VA
Has thanked: 54 times
Been thanked: 1319 times

Re: The Official "What is it?" Thread

Post by morrisey0 »

I build RCs like people would have done back in the '90s ..................................... if they had 3D printers.

User avatar
Diamond Dave
Super Member
Posts: 1502
Joined: Tue Nov 29, 2011 6:42 am
Location: Calgary
Has thanked: 578 times
Been thanked: 103 times

Re: The Official "What is it?" Thread

Post by Diamond Dave »

Just like ferals and you took them in. Haha! Thanks for this.

I thought Futaba. Mid to late 80's it is.

User avatar
Frankentruck
Super Member
Posts: 2769
Joined: Fri Feb 19, 2021 2:59 pm
Location: Texas, USA
Has thanked: 1704 times
Been thanked: 1932 times

Re: The Official "What is it?" Thread

Post by Frankentruck »

Anyone recognize this aluminum end bell? I feel like it should be for an Atlas motor but really have no idea.
.
Screenshot_20230811-213419.png
Frankensteined RC10T3 / Franky Jr RC10GT-e (x2) / A+ stamp / Toy Story RC / Graphite replica / B1.5 BFG 5LTi / Clonewald / Hyper Hornet

"I love the effort, but it sure looks like you took the long way around to a tub again"

User avatar
LowClassCC
Approved Member
Posts: 895
Joined: Wed Mar 25, 2009 4:08 am
Location: Mauckport, Indiana
Has thanked: 94 times
Been thanked: 124 times

Re: The Official "What is it?" Thread

Post by LowClassCC »

Picked up a Tamiya Blackfoot roller and it has these aluminum shocks on the front. Anybody seen them before?
20230814_145319.jpg
20230814_133150.jpg

User avatar
MarkyDents
Approved Member
Posts: 1034
Joined: Sun Jan 10, 2021 4:52 pm
Location: Staten Island, N.Y.
Has thanked: 1402 times
Been thanked: 517 times

Re: The Official "What is it?" Thread

Post by MarkyDents »

Frankentruck wrote: Sat Aug 12, 2023 2:37 am Anyone recognize this aluminum end bell? I feel like it should be for an Atlas motor but really have no idea.
.
Screenshot_20230811-213419.png
Nope but it sure is purrty 8)
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out 8)

User avatar
MarkyDents
Approved Member
Posts: 1034
Joined: Sun Jan 10, 2021 4:52 pm
Location: Staten Island, N.Y.
Has thanked: 1402 times
Been thanked: 517 times

Re: The Official "What is it?" Thread

Post by MarkyDents »

LowClassCC wrote: Mon Aug 14, 2023 7:04 pm Picked up a Tamiya Blackfoot roller and it has these aluminum shocks on the front. Anybody seen them before?

20230814_145319.jpg

20230814_133150.jpg
I’ve got a pair myself that had ironically come on a frog I picked up like 25 years ago lol. Looking forward to someone knowing too.
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out 8)

Retro rc
Super Member
Posts: 544
Joined: Sat Apr 04, 2015 10:10 am
Location: Auckland New Zealand
Has thanked: 564 times
Been thanked: 390 times

Re: The Official "What is it?" Thread

Post by Retro rc »

LowClassCC wrote: Mon Aug 14, 2023 7:04 pm Picked up a Tamiya Blackfoot roller and it has these aluminum shocks on the front. Anybody seen them before?

20230814_145319.jpg

20230814_133150.jpg
Tamiya racing hop up shocks for the grasshopper hornet etc sorry don’t know the part number

Here’s a link that might help

https://tamiyabase.com/forum/11-technical/17943-wazzup-with-vintage-frog-shocks

User avatar
LowClassCC
Approved Member
Posts: 895
Joined: Wed Mar 25, 2009 4:08 am
Location: Mauckport, Indiana
Has thanked: 94 times
Been thanked: 124 times

Re: The Official "What is it?" Thread

Post by LowClassCC »

Retro rc wrote: Mon Aug 14, 2023 7:20 pm
LowClassCC wrote: Mon Aug 14, 2023 7:04 pm Picked up a Tamiya Blackfoot roller and it has these aluminum shocks on the front. Anybody seen them before?

20230814_145319.jpg

20230814_133150.jpg
Tamiya racing hop up shocks for the frog Subaru brat etc sorry don’t know the part number

Here’s a link that might help

https://tamiyabase.com/forum/11-technical/17943-wazzup-with-vintage-frog-shocks
That's good enough for me. Thanks Retro rc

Retro rc
Super Member
Posts: 544
Joined: Sat Apr 04, 2015 10:10 am
Location: Auckland New Zealand
Has thanked: 564 times
Been thanked: 390 times

Re: The Official "What is it?" Thread

Post by Retro rc »

Looks like they came as standard on the original release frog but have been changed slightly on the re releases, different springs and black top eyelet

User avatar
MarkyDents
Approved Member
Posts: 1034
Joined: Sun Jan 10, 2021 4:52 pm
Location: Staten Island, N.Y.
Has thanked: 1402 times
Been thanked: 517 times

Re: The Official "What is it?" Thread

Post by MarkyDents »

LowClassCC wrote: Mon Aug 14, 2023 7:04 pm Picked up a Tamiya Blackfoot roller and it has these aluminum shocks on the front. Anybody seen them before?

20230814_145319.jpg

20230814_133150.jpg
Btw your Blackfoot has a frog chassis, it’s life may very well have started out as a buggy :D
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out 8)

User avatar
juicedcoupe
Super Member
Posts: 3037
Joined: Sun Aug 16, 2020 8:05 pm
Location: Pascagoula, MS
Has thanked: 239 times
Been thanked: 1787 times

Re: The Official "What is it?" Thread

Post by juicedcoupe »

Retro rc wrote: Mon Aug 14, 2023 7:31 pm Looks like they came as standard on the original release frog but have been changed slightly on the re releases, different springs and black top eyelet
The new shocks have a similar look but are a complete different design.

Some people don't like the re-re Frog shocks. I think that the springs are the biggest problem. But you can use RC10 front black springs with the included plastics and they are okay. No shock will make an ORV great.
Screenshot_20230814_145908_Samsung Internet.jpg
Always looking for new and interesting ways to waste money.

User avatar
LowClassCC
Approved Member
Posts: 895
Joined: Wed Mar 25, 2009 4:08 am
Location: Mauckport, Indiana
Has thanked: 94 times
Been thanked: 124 times

Re: The Official "What is it?" Thread

Post by LowClassCC »

MarkyDents wrote: Mon Aug 14, 2023 7:35 pm
LowClassCC wrote: Mon Aug 14, 2023 7:04 pm Picked up a Tamiya Blackfoot roller and it has these aluminum shocks on the front. Anybody seen them before?

20230814_145319.jpg

20230814_133150.jpg
Btw your Blackfoot has a frog chassis, it’s life may very well have started out as a buggy :D
yep. I did get a couple red chassis pieces with it also. I know they changed the gearing from the frog to the blackfoot due to tire size so I plan to start counting teeth as soon as I can find an original blackfoot manual.

User avatar
Lowgear
Administrator
Posts: 3980
Joined: Tue Feb 07, 2006 6:00 pm
Location: New England
Has thanked: 80 times
Been thanked: 625 times

Re: The Official "What is it?" Thread

Post by Lowgear »


User avatar
juicedcoupe
Super Member
Posts: 3037
Joined: Sun Aug 16, 2020 8:05 pm
Location: Pascagoula, MS
Has thanked: 239 times
Been thanked: 1787 times

Re: The Official "What is it?" Thread

Post by juicedcoupe »

LowClassCC wrote: Mon Aug 14, 2023 11:56 pm I know they changed the gearing from the frog to the blackfoot due to tire size so I plan to start counting teeth as soon as I can find an original blackfoot manual.
They are easy to identify. Blackfoots used a one piece counter gear, while Frogs had a two piece. The Blackfoot should also have a motor adapter plate and long 10T pinion gear.

Frogs had three gear ratios available. The one that uses the 52T gear is actually compatible with the Blackfoot adapter and pinion.
Always looking for new and interesting ways to waste money.

  • Similar Topics
    Replies
    Views
    Last post
  • * The OFFICIAL Slot Car Thread*
    by scr8p » » in Slot Cars
    59 Replies
    8849 Views
    Last post by Diamond Dave
  • *** The official VINTAGE OFFROAD NATIONALS thread ***
    by Erich Reichert » » in Racing News / Get-Togethers
    431 Replies
    40359 Views
    Last post by Eccentric
  • Finally, the official Futaba FXT thread
    by billetproofcustoms » » in Other Makes/Models
    102 Replies
    16000 Views
    Last post by mikesofunny
  • Official 2010 Vintage On-road Nationals thread.....Feb 19-21
    by Brandon G » » in Racing News / Get-Togethers
    67 Replies
    9326 Views
    Last post by bearrickster
  • 2010 VINTAGE OFFROAD NATIONALS OFFICIAL THREAD• SEPT 16-19TH
    by Erich Reichert » » in Racing News / Get-Togethers
    448 Replies
    37180 Views
    Last post by MelvinsArmy
  • 2009 VINTAGE OFFROAD NATIONALS OFFICIAL THREAD• SEPT 18-20TH
    by Erich Reichert » » in Racing News / Get-Togethers
    321 Replies
    29156 Views
    Last post by tazz888
  • The official "lightweight" chassis thread.
    by templeofspeed » » in R/C Off-Topic / Chit-Chat
    351 Replies
    35361 Views
    Last post by Frankentruck
  • It's Official.........
    by mrlexan » » in Off-Topic / Chit-Chat
    15 Replies
    2266 Views
    Last post by mrlexan

Return to “Identifications”

Who is online

Users browsing this forum: No User AvatarCommonCrawl [Bot] and 0 guests