andy's molded pro race kit
- Tadracket
- Approved Member
- Posts: 1302
- Joined: Sun Feb 18, 2007 10:57 pm
- Location: Southport North Carolina
Re: andy's molded pro race kit
BLACK TAPE??? SHARPIE MARKER???
Boy I am glad I did not read this last night. I would have had nightmares for sure
Boy I am glad I did not read this last night. I would have had nightmares for sure
He's an idiot. Comes from upbringing. His parents are probably idiots too.
- templeofspeed
- Approved Member
- Posts: 2087
- Joined: Tue Aug 01, 2006 10:02 pm
- Location: Central Ohio
- Been thanked: 8 times
Re: andy's molded pro race kit
Any port in a storm, chief.Tadracket wrote:BLACK TAPE??? SHARPIE MARKER???
Boy I am glad I did not read this last night. I would have had nightmares for sure
Now, who makes orangish gold tape...?
I was initially on the receiving end of the 'lectric tape "repair" a long time ago, I did not pioneer the technique...
- templeofspeed
- Approved Member
- Posts: 2087
- Joined: Tue Aug 01, 2006 10:02 pm
- Location: Central Ohio
- Been thanked: 8 times
Re: andy's molded pro race kit
Back to the CE chassis subject...
Here's a late six-gear:
http://cgi.ebay.com/VINTAGE-ASSOCIATED-RC10-GOLD-PAN-TUB-CHAMPION-EDITION_W0QQitemZ130165917399
Notice it also has black plastic shock caps and a four on a side front tower. Seller claims B over A chassis. Can't tell about the motor plate. Last of the six gears there for sure...
Here's a late six-gear:
http://cgi.ebay.com/VINTAGE-ASSOCIATED-RC10-GOLD-PAN-TUB-CHAMPION-EDITION_W0QQitemZ130165917399
Notice it also has black plastic shock caps and a four on a side front tower. Seller claims B over A chassis. Can't tell about the motor plate. Last of the six gears there for sure...
Re: andy's molded pro race kit
Hi scr8p
Nice kit
If you want i have the article of this kit i test. But in Frensh
By
Damien
Nice kit
If you want i have the article of this kit i test. But in Frensh
By
Damien
- Asso_man!
- Approved Member
- Posts: 3959
- Joined: Thu Aug 03, 2006 7:49 am
- Location: EU
- Has thanked: 40 times
- Been thanked: 70 times
Re: andy's molded pro race kit
at least an English version of it : http://www.rc10talk.com/viewtopic.php?f=7&t=490
_____________________________________________
_____________________________________________
Come and visit the stable
_____________________________________________
Come and visit the stable
- scr8p
- Administrator
- Posts: 16524
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 957 times
Re: andy's molded pro race kit
told ya......................scr8p wrote:i'm gonna try to refrain from starting on this until i have everything i need to finish it. but, i doubt it will happen. i just can't help it.
- Attachments
-
- IMG_2558.JPG (106.11 KiB) Viewed 1254 times
- IMG_2558.JPG (106.11 KiB) Viewed 1254 times
-
- IMG_2561.JPG (107.44 KiB) Viewed 1254 times
- IMG_2561.JPG (107.44 KiB) Viewed 1254 times
- JK Racing
- Super Member
- Posts: 4603
- Joined: Thu Jul 19, 2007 2:32 pm
- Location: Placentia, CA
- Has thanked: 103 times
- Been thanked: 200 times
Re: andy's molded pro race kit
that is a thing of beauty...what are your plans on finishing it?
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
- scr8p
- Administrator
- Posts: 16524
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 957 times
Re: andy's molded pro race kit
i'll just double post this. i'm too lazy to type.
scr8p wrote:well, one nice thing about this is the main chassis/suspension stuff is figured out already. it's just a matter of which shocks, trans, and tire/rim combo you want to go with. this one, like my other andy's molded chassis w/ the standard kick-up, i'm gonna use the mip shock bodies. the thing that sucks is now i need 8 black aluminum shock caps instead of 4. it'll most likely have a stock 6 gear trans, too, since i don't have any more mip's. and i don't want to drill the chassis for a stealth. i'll use the trailing arm setup on it, also, with the tall rear tower. on the front, i'm going to use a tall molded andy's tower i have instead of the one that came with the kit. that way, i can use the 1.02 shocks on the front. i like the tall shocks on the front.
but, neither of the andy's molded cars i have will be done until i can get those shock caps. if i have to, i'll strip an polish some blue ft caps. but, i only want to build them once.
- JK Racing
- Super Member
- Posts: 4603
- Joined: Thu Jul 19, 2007 2:32 pm
- Location: Placentia, CA
- Has thanked: 103 times
- Been thanked: 200 times
Re: andy's molded pro race kit
i read that...where is my head today, damn time change.
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
- scr8p
- Administrator
- Posts: 16524
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 957 times
Re: andy's molded pro race kit
JK Racing wrote:i read that...where is my head today, damn time change.
since i'll end up using the 6 gear trans, i'd like to put the thorp 48p coversion in it, but i still need the 2 small topshaft gears for the diff. i'm also pretty much giving up on finding 8 black aluminum shock caps for this car and the other one. hell, i can't even find one. i'll just polish up some blue ft caps and be done with it. i like the way the shocks look on my A&L, so i'll just go that route.
Re: andy's molded pro race kit
That looks great J, glad I could have been of help. I can not wait to see how it works out. I have a TPS chain tranny that might look good on there!
Moose
Moose
Get on with it!
- scr8p
- Administrator
- Posts: 16524
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 957 times
Re: andy's molded pro race kit
hmm................... is it all brand new, or near perfect?bigmoose wrote:I have a TPS chain tranny that might look good on there!
- scr8p
- Administrator
- Posts: 16524
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 957 times
Re: andy's molded pro race kit
i'm also building a pro graphite version of this same car, too. this one will use .71's in the front, though. and since the andy's steering racks are so hard to find, i drilled and countersunk new holes for a standard bell crank, as well as the holes for a stealth trans.
- jcwrks
- Approved Member
- Posts: 540
- Joined: Wed Jun 21, 2017 3:40 pm
- Location: San Angelo, TX
- Has thanked: 120 times
- Been thanked: 257 times
Re: andy's molded pro race kit
Did this ever get finished? I see USPS Priority tape on the box. Did the seller just slap a shipping label on the box and send it?
The official TX SKUNK
- scr8p
- Administrator
- Posts: 16524
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 957 times
Re: andy's molded pro race kit
It was sold with all of my other Andy's builds back in 2008 when all my health crap started. Never finished it.
It was shipped to me in a separate box. But it had changed hands a few time, and the address labels stuck to the back of the kit box. Like 3... 1 on top of another, and apparently shipped priority at least once.
It was shipped to me in a separate box. But it had changed hands a few time, and the address labels stuck to the back of the kit box. Like 3... 1 on top of another, and apparently shipped priority at least once.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 6 Replies
- 1304 Views
-
Last post by USA-1
-
- 6 Replies
- 5368 Views
-
Last post by jcwrks
-
- 2 Replies
- 313 Views
-
Last post by jcwrks
-
- 28 Replies
- 4860 Views
-
Last post by Speedworm
-
- 1 Replies
- 512 Views
-
Last post by Lavigna
-
- 7 Replies
- 2210 Views
-
Last post by Asso_man!
-
- 4 Replies
- 1137 Views
-
Last post by integra22t
-
- 2 Replies
- 984 Views
-
Last post by fredswain
Who is online
Users browsing this forum: No registered users and 14 guests