They are fairly sought-after if you wanted to sell on eBay or save for an appropriate build. I wouldn't waste em on a runner. I'd bet you would have no problem finding someone to trade you a set of universals or CV'S for em
Actually after searching, the red ends make it for a AYK application. The white ends are for rc10. Makes them maybe a little more valuable to others and less to you
The Official "What is it?" Thread
-
GoMachV
- Approved Member
- Posts: 12214
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 1084 times
- Been thanked: 3762 times
-
Incredible_Serious
- Approved Member
- Posts: 3652
- Joined: Tue Jan 29, 2008 12:09 am
- Location: Melbourne, Victoria, Australia
- Has thanked: 1695 times
- Been thanked: 1125 times
Re: The Official "What is it?" Thread
I have the red / orange ended bones in my PB Mini Mustang.... and that's a runner. Almost lost one last year at the Vintage Bash.... luckily, was found on the track and handed in.GoMachV wrote: ↑Mon Mar 03, 2025 2:32 pm They are fairly sought-after if you wanted to sell on eBay or save for an appropriate build. I wouldn't waste em on a runner. I'd bet you would have no problem finding someone to trade you a set of universals or CV'S for em
Actually after searching, the red ends make it for a AYK application. The white ends are for rc10. Makes them maybe a little more valuable to others and less to you
Osiris is the key.
"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken
Look out for Todd K. - he's a convicted serial killer!!!
"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken
Look out for Todd K. - he's a convicted serial killer!!!
-
Frankentruck
- Super Member
- Posts: 3677
- Joined: Fri Feb 19, 2021 9:59 am
- Location: Texas, USA
- Has thanked: 2520 times
- Been thanked: 2823 times
Re: The Official "What is it?" Thread
I've been keeping my eye out for an AYK Buffalo or Bobcat, just because the suspension is cool. Maybe they would work for one of those. Or I might let them go to someone in exchange for an RC10TALK donation.GoMachV wrote: ↑Mon Mar 03, 2025 2:32 pm They are fairly sought-after if you wanted to sell on eBay or save for an appropriate build. I wouldn't waste em on a runner. I'd bet you would have no problem finding someone to trade you a set of universals or CV'S for em
Actually after searching, the red ends make it for a AYK application. The white ends are for rc10. Makes them maybe a little more valuable to others and less to you
Frankensteined RC10T3 / Franky Jr RC10GT-e (x2) / A+ stamp / Toy Story RC / Graphite replica / B1.5 BFG 5LTi / Clonewald / Hyper Hornet
"I love the effort, but it sure looks like you took the long way around to a tub again"
"I love the effort, but it sure looks like you took the long way around to a tub again"
-
klavy69
- Moderator
- Posts: 5205
- Joined: Thu May 29, 2008 4:11 pm
- Location: Fulton, IL (Land of one stop light but we DO have a windmill!)
- Has thanked: 628 times
- Been thanked: 294 times
Re: The Official "What is it?" Thread
Sure look to be them.Frankentruck wrote: ↑Mon Mar 03, 2025 1:41 pm Found these in my box of spares. Race Prep Superbones?
Peace and professionlism.....Kabunga signing off!!!
-
Frankentruck
- Super Member
- Posts: 3677
- Joined: Fri Feb 19, 2021 9:59 am
- Location: Texas, USA
- Has thanked: 2520 times
- Been thanked: 2823 times
Re: The Official "What is it?" Thread
Sometimes to get what I need I end up with more than I wanted. This Ultima is probably a keeper for a JJ-ish project, but it has some things I don't recognize. Instead of the rear hex, it has some sort of adapters with modified RC10 rear wheels. The front has larger 5mm axles with Tamiya wheels. I don't know enough about Kyosho to know if they make these steering arms and axles or where else they are from. Everything on this seems like it was done back in the day (everything was Futaba G plug), so I'm ruling out modern mods. Any thoughts on the front and rear axles stuff?
.
.
Frankensteined RC10T3 / Franky Jr RC10GT-e (x2) / A+ stamp / Toy Story RC / Graphite replica / B1.5 BFG 5LTi / Clonewald / Hyper Hornet
"I love the effort, but it sure looks like you took the long way around to a tub again"
"I love the effort, but it sure looks like you took the long way around to a tub again"
-
GoMachV
- Approved Member
- Posts: 12214
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 1084 times
- Been thanked: 3762 times
Re: The Official "What is it?" Thread
The front axles were made by several companies, including A&L. I still sell those today.
The rear adapters look like Hot trick
The rear adapters look like Hot trick
- Attachments
-
-
- s-l400(3).jpg (24.55 KiB) Viewed 482 times
- s-l400(3).jpg (24.55 KiB) Viewed 482 times
-
ZED32
- Approved Member
- Posts: 212
- Joined: Wed Jan 10, 2024 1:49 am
- Has thanked: 134 times
- Been thanked: 209 times
Re: The Official "What is it?" Thread
What are these drive shafts? The guy I got them from said they were rc10 mip ones but they're definitely not that. They look like losi jrx parts of some sort but I could be wrong.
- Attachments
-
-
-
TRX-1-3
- Approved Member
- Posts: 2021
- Joined: Sat Mar 29, 2014 12:13 pm
- Location: USAG Humphreys, South Korea
- Has thanked: 1962 times
- Been thanked: 947 times
Re: The Official "What is it?" Thread
Nothing definitive from me, but I agree they do look like Losi parts
Hope you're doin' something fun.
-
Dangeruss
- Approved Member
- Posts: 1301
- Joined: Wed Jul 12, 2023 12:47 pm
- Location: Surf City USA
- Has thanked: 374 times
- Been thanked: 1223 times
Re: The Official "What is it?" Thread
Losi XX-T/XXX-T/XXX-NT dogbones.... with the yoke on the bone they should measure like 3.5in. pinhole to pin.
-
Incredible_Serious
- Approved Member
- Posts: 3652
- Joined: Tue Jan 29, 2008 12:09 am
- Location: Melbourne, Victoria, Australia
- Has thanked: 1695 times
- Been thanked: 1125 times
Re: The Official "What is it?" Thread
Yep, I know this is a 540 motor.... but other than that, I have no clue. Anybody know more than that? Turns? Model designed for?
Motor is a Flying Point FP-2100B 540 size. That's all I have, other than it looks like a black silver can...
Motor is a Flying Point FP-2100B 540 size. That's all I have, other than it looks like a black silver can...
Osiris is the key.
"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken
Look out for Todd K. - he's a convicted serial killer!!!
"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken
Look out for Todd K. - he's a convicted serial killer!!!
-
juicedcoupe
- Super Member
- Posts: 3445
- Joined: Sun Aug 16, 2020 4:05 pm
- Location: Pascagoula, MS
- Has thanked: 265 times
- Been thanked: 2032 times
Re: The Official "What is it?" Thread
That front bearing carrier is huge.Incredible_Serious wrote: ↑Sun Apr 20, 2025 6:53 pm Yep, I know this is a 540 motor.... but other than that, I have no clue. Anybody know more than that? Turns? Model designed for?
Motor is a Flying Point FP-2100B 540 size. That's all I have, other than it looks like a black silver can...
02.jpg
Always looking for new and interesting ways to waste money.
-
Phin
- Approved Member
- Posts: 2806
- Joined: Tue Feb 21, 2012 5:17 pm
- Location: NY²
- Has thanked: 83 times
- Been thanked: 236 times
Re: The Official "What is it?" Thread
Don't know for sure, but it might be for FP's Onro T10. http://pro10.fixpunkt.net/1989%20FP%20Onro%20T10/Incredible_Serious wrote: ↑Sun Apr 20, 2025 6:53 pm Yep, I know this is a 540 motor.... but other than that, I have no clue. Anybody know more than that? Turns? Model designed for?
Motor is a Flying Point FP-2100B 540 size. That's all I have, other than it looks like a black silver can...
-
Incredible_Serious
- Approved Member
- Posts: 3652
- Joined: Tue Jan 29, 2008 12:09 am
- Location: Melbourne, Victoria, Australia
- Has thanked: 1695 times
- Been thanked: 1125 times
Re: The Official "What is it?" Thread
That's the consensus Jeff Malar and I came to, and he's my usual Methuselah go-to guy when it comes to weird brand stuff....Phin wrote: ↑Mon Apr 21, 2025 12:17 am Don't know for sure, but it might be for FP's Onro T10. http://pro10.fixpunkt.net/1989%20FP%20Onro%20T10/
Osiris is the key.
"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken
Look out for Todd K. - he's a convicted serial killer!!!
"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken
Look out for Todd K. - he's a convicted serial killer!!!
-
GoMachV
- Approved Member
- Posts: 12214
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 1084 times
- Been thanked: 3762 times
-
morrisey0
- Approved Member
- Posts: 1732
- Joined: Wed Jan 13, 2021 2:45 pm
- Location: Richmond, VA
- Has thanked: 77 times
- Been thanked: 1762 times
Re: The Official "What is it?" Thread
Who made this mid conversion kit?
I build RCs like people would have done back in the '90s ..................................... if they had 3D printers.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 59 Replies
- 14591 Views
-
Last post by Diamond Dave
-
- 106 Replies
- 25011 Views
-
Last post by mikesofunny
-
- 431 Replies
- 50773 Views
-
Last post by Eccentric
-
- 67 Replies
- 15574 Views
-
Last post by bearrickster
-
- 321 Replies
- 39744 Views
-
Last post by tazz888
-
- 448 Replies
- 47904 Views
-
Last post by MelvinsArmy
-
- 351 Replies
- 45005 Views
-
Last post by Frankentruck
-
- 15 Replies
- 3878 Views
-
Last post by mrlexan
Who is online
Users browsing this forum: No registered users and 5 guests