What are your plans with your re-release RC10T?

Everything pertaining to the RC10 truck re-release.

Moderators: scr8p, klavy69

User avatar
Dangeruss
Approved Member
Posts: 1269
Joined: Wed Jul 12, 2023 4:47 pm
Location: Surf City USA
Has thanked: 360 times
Been thanked: 1178 times

Re: What are your plans with your re-release RC10T?

Post by Dangeruss »

rknize wrote: Fri Apr 11, 2025 8:43 pm I have the CC and 40th as well, but I assume no one wants to see pictures of box-art RC10s.
That's like assuming a crackhead doesn't want to see your pocket full of crack. :mrgreen:

Brendan2904
Approved Member
Posts: 523
Joined: Tue Apr 09, 2024 3:01 am
Location: New York
Has thanked: 240 times
Been thanked: 241 times

Re: What are your plans with your re-release RC10T?

Post by Brendan2904 »

I was going to hold off until the summer to build it but I got working on the 4wd then the team car then rolled right into the RC10T.
Attachments
IMG_2676.jpeg
IMG_2677.jpeg
IMG_2678.jpeg
IMG_2679.jpeg

User avatar
Frankentruck
Super Member
Posts: 3654
Joined: Fri Feb 19, 2021 2:59 pm
Location: Texas, USA
Has thanked: 2493 times
Been thanked: 2799 times

Re: What are your plans with your re-release RC10T?

Post by Frankentruck »

Brendan2904 wrote: Sat Apr 12, 2025 1:18 am I was going to hold off until the summer to build it but I got working on the 4wd then the team car then rolled right into the RC10T.
Did the 10T kit come with the wide front wheels too? Or did you add some vintage fronts?
Frankensteined RC10T3 / Franky Jr RC10GT-e (x2) / A+ stamp / Toy Story RC / Graphite replica / B1.5 BFG 5LTi / Clonewald / Hyper Hornet

"I love the effort, but it sure looks like you took the long way around to a tub again"

Brendan2904
Approved Member
Posts: 523
Joined: Tue Apr 09, 2024 3:01 am
Location: New York
Has thanked: 240 times
Been thanked: 241 times

Re: What are your plans with your re-release RC10T?

Post by Brendan2904 »

Frankentruck wrote: Sat Apr 12, 2025 1:26 am
Brendan2904 wrote: Sat Apr 12, 2025 1:18 am I was going to hold off until the summer to build it but I got working on the 4wd then the team car then rolled right into the RC10T.
Did the 10T kit come with the wide front wheels too? Or did you add some vintage fronts?
Was able to get my hands on some ReRe Gt wheels and tires.

User avatar
rknize
Regular Member
Posts: 23
Joined: Tue Apr 09, 2024 12:59 pm
Has thanked: 5 times
Been thanked: 22 times

Re: What are your plans with your re-release RC10T?

Post by rknize »

1911Colt wrote: Fri Apr 11, 2025 11:32 pm Did you carefully plan this beforehand? Or get very lucky? :D Either way, fantastic job!
Ha! I wish....

Thanks!

User avatar
Dustydrone
Super Member
Posts: 65
Joined: Wed May 29, 2024 3:40 pm
Location: Ojai, Ca
Has thanked: 376 times
Been thanked: 71 times

Re: What are your plans with your re-release RC10T?

Post by Dustydrone »

Has anyone on here built, seen, or dreamed of an RC10T 4wd?

Is it possible to build an RC10T 4wd with a ReRe kit and a Ten4.1 kit?

Is this feasible or just a dumb idea?

Thanks for entertaining this old guy's thoughts 👍
The difference between good and great, is just a little bit more...

User avatar
GoMachV
Approved Member
Posts: 12198
Joined: Mon Apr 30, 2012 2:31 am
Location: Twin Falls, ID
Has thanked: 1081 times
Been thanked: 3743 times

Re: What are your plans with your re-release RC10T?

Post by GoMachV »

Dustydrone wrote: Tue Apr 15, 2025 7:54 pm
Is it possible to build an RC10T 4wd with a ReRe kit and a Ten4.1 kit?
the only part that would fit would be the idler in the rear, rear bulkhead, and steering assembly. The entire front trans would not work and of course the driveshafts. The 10T as with the DS are just different animals up front, and not at all compatible.

User avatar
juicedcoupe
Super Member
Posts: 3438
Joined: Sun Aug 16, 2020 8:05 pm
Location: Pascagoula, MS
Has thanked: 265 times
Been thanked: 2023 times

Re: What are your plans with your re-release RC10T?

Post by juicedcoupe »

Dustydrone wrote: Tue Apr 15, 2025 7:54 pm Has anyone on here built, seen, or dreamed of an RC10T 4wd?

Is it possible to build an RC10T 4wd with a ReRe kit and a Ten4.1 kit?

Is this feasible or just a dumb idea?

Thanks for entertaining this old guy's thoughts 👍
Maybe a buggy with truck conversion wheels.

The wheelbase would be a little short but there are some truck bodies that'd fit.
Always looking for new and interesting ways to waste money.

User avatar
GoMachV
Approved Member
Posts: 12198
Joined: Mon Apr 30, 2012 2:31 am
Location: Twin Falls, ID
Has thanked: 1081 times
Been thanked: 3743 times

Re: What are your plans with your re-release RC10T?

Post by GoMachV »

if you were to do a truck conversion, you could use the ten4 in the LWB position with the lwb belt

User avatar
Dustydrone
Super Member
Posts: 65
Joined: Wed May 29, 2024 3:40 pm
Location: Ojai, Ca
Has thanked: 376 times
Been thanked: 71 times

Re: What are your plans with your re-release RC10T?

Post by Dustydrone »

juicedcoupe wrote: Tue Apr 15, 2025 8:13 pm
Dustydrone wrote: Tue Apr 15, 2025 7:54 pm Has anyone on here built, seen, or dreamed of an RC10T 4wd?

Is it possible to build an RC10T 4wd with a ReRe kit and a Ten4.1 kit?

Is this feasible or just a dumb idea?

Thanks for entertaining this old guy's thoughts 👍
Maybe a buggy with truck conversion wheels.

The wheelbase would be a little short but there are some truck bodies that'd fit.
That's a different direction but I like where you are going with this. I did have an RC10 with the Monster Truck conversation back in the early 90s.

Thanks!
Alan
The difference between good and great, is just a little bit more...

User avatar
rknize
Regular Member
Posts: 23
Joined: Tue Apr 09, 2024 12:59 pm
Has thanked: 5 times
Been thanked: 22 times

Re: What are your plans with your re-release RC10T?

Post by rknize »

Well that didn't take long, lol...
team-associated-rc10t-broken-arm.jpg

User avatar
RogueIV
Approved Member
Posts: 1014
Joined: Sun Aug 28, 2022 2:04 am
Location: W. Mass
Has thanked: 1907 times
Been thanked: 930 times

Re: What are your plans with your re-release RC10T?

Post by RogueIV »

rknize wrote: Sun Apr 20, 2025 4:02 pm Well that didn't take long, lol...

team-associated-rc10t-broken-arm.jpg
At least it's getting used out there and not shelfbound for eternity :lol:
Consistency is the key I keep misplacing.

User avatar
rknize
Regular Member
Posts: 23
Joined: Tue Apr 09, 2024 12:59 pm
Has thanked: 5 times
Been thanked: 22 times

Re: What are your plans with your re-release RC10T?

Post by rknize »

RogueIV wrote: Sun Apr 20, 2025 8:01 pm
rknize wrote: Sun Apr 20, 2025 4:02 pm Well that didn't take long, lol...

team-associated-rc10t-broken-arm.jpg
At least it's getting used out there and not shelfbound for eternity :lol:
Yeah, built this intending to bash it around a bit. It drives and jumps awesome, but the front arms are pretty frail if you hit anything with them. I guess that's to be expected with such an old design. The stock slipper is barking like crazy (which I also kind of expected), so I ordered a V2 for it. These were never intended for brushless, lol.

User avatar
RogueIV
Approved Member
Posts: 1014
Joined: Sun Aug 28, 2022 2:04 am
Location: W. Mass
Has thanked: 1907 times
Been thanked: 930 times

Re: What are your plans with your re-release RC10T?

Post by RogueIV »

rknize wrote: Mon Apr 21, 2025 12:58 am
RogueIV wrote: Sun Apr 20, 2025 8:01 pm
rknize wrote: Sun Apr 20, 2025 4:02 pm Well that didn't take long, lol...

team-associated-rc10t-broken-arm.jpg
At least it's getting used out there and not shelfbound for eternity :lol:
Yeah, built this intending to bash it around a bit. It drives and jumps awesome, but the front arms are pretty frail if you hit anything with them. I guess that's to be expected with such an old design. The stock slipper is barking like crazy (which I also kind of expected), so I ordered a V2 for it. These were never intended for brushless, lol.
If it's making a barking sound that's probably the diff not the slipper. I'd tighten the diff a little bit and loosen the slipper.
Consistency is the key I keep misplacing.

User avatar
RC10th
Approved Member
Posts: 4703
Joined: Sat Feb 16, 2013 2:51 pm
Location: Australia
Has thanked: 50 times
Been thanked: 1495 times

Re: What are your plans with your re-release RC10T?

Post by RC10th »

rknize wrote: Sun Apr 20, 2025 4:02 pm Well that didn't take long, lol...

team-associated-rc10t-broken-arm.jpg
At least you missed the bumper :lol:
I was old school - when old school wasn't cool !

  • Similar Topics
    Replies
    Views
    Last post

Return to “RC10 Truck Re-Release Forum”

Who is online

Users browsing this forum: No User AvatarCommonCrawl [Bot] and 1 guest