i can see maybe chipping the very edge of the chassis where the stock motor mount attaches, but more than likely it would just flex like rpm plastic is supposed to. you will definitely not break the entire back end off by running a lite sink...
i raced one at the vintage nats. i have no doubt i could bash it at a skatepark and not do anything more than pop a ball end.
Yeah I don't mean the entire rear end, just the bit behind the gearbox. It'll flex but eventually it might break. I wouldn't risk it.. Also kind of defeats the purpose of a motor guard when the motor guard can move enough to hit the motor.
i purchased a rpm 10t off eBay, missing some rpm parts, even though they guy said every thing was rpm, :roll:
it was completely covered in red clay.. even the shock oil was red... eww... but i got what i wanted, a rpm ultra truck that wasn't so...
Picked up this rpm 10t recently and is complete minus a broken battery post.
Last post
You just snap photos with your phone then go to the app check the boxes of the photos you want to resize then scroll down the list and shrink to the desired size then save to sd card and your done. I tried a bunch of different ones and this was by...
I started with a new chassis that I found at a car show/swap meet earlier this year. I'm adding some Tecna turnbuckles, HG vlt shocks and a Hydradrive unit to the Steath trans( Thanks Rob for the help with the stealth version instructions 8) .
Last post
Sweet ride! Are you going to run it, or will it be a shelfer?
Would like to run it one day but for now just a shelfer
Nice build! Jammin Jumper body? I wonder if Traxxas stole the design from Jammin for the Bandit? A fitting name for the car...
I recently acquired a RPM 10T ultra molded chassis kit and need to get a rear motor guard for it. Will the Worlds RC10 rear motor guard work? They look identical in the images I researched. These things are like hens teeth to find.
Last post
You can email RPM and get one direct from them for like $10.
They're the same as the ones for the RC10 graphites, just ano'd black.
Need a battery cover pm me if anyone has one, doesnt have to be mint. 243023873_352565443284855_5207866442102251116_n.jpg 243008004_288023229822060_146143907607396927_n.jpg 243250410_4240591796067359_3984482972145000818_n.jpg...
Last post
Yea well when everyone else is shaking all the dirt out of their tubs you could spend that time squeezing off a couple more laps 8)
I am officially an RC10 owner. What better first car than this beauty. I just received.
Vintage Team Associated RC10 Gold Pan RPM ULTRA MOLD.
Has stealth transmission and Losi HydroDrive.
Period correct tekin ESC and unknown brushed motor.
MIP...
Last post
As of last year…
“Yes,we do still have both the silver and yellow springs. The springs are $5 per pair (either color choice), plus $5 shipping for up to 10 pairs shipped anywhere in the USA.”
“We are offering those motor plates for $10 each, plus...