So here is the "real" Re Re question...

[SnoopMaxx]

Are the front towers on the 6001 and 6010, identical in height, other than the extra hole on the older version ?
In your opinion. Is the extra hole the only reason for the front ride height difference ?

[GoMachV]

Yes, I compared them and they are identical minus the hole

[SFC K]

Are the front towers on the 6001 and 6010, identical in height, other than the extra hole on the older version ?
In your opinion. Is the extra hole the only reason for the front ride height difference ?

Good questions Snoop. I was wondering the same thing. I do have a extra front tower that has both holes so I am curious what Jeff used.

I noticed you did not use the two aluminum spacers for the rear mount. Was that on purpose?

[GoMachV]

Good questions Snoop. I was wondering the same thing. I do have a extra front tower that has both holes so I am curious what Jeff used.

I noticed you did not use the two aluminum spacers for the rear mount. Was that on purpose?

are you talking to me? I used the stock tower which is identical to the original except they didnt drill the extra set of holes and I didnt either

I didnt use the rear body mount spacers per the manual as well

the only change I made was to use shock spacers in the rear as it is cosmetically the same as the manual shows