Page 2 of 2
Re: Club 10 Racer
Posted: Sat Jan 21, 2017 5:35 pm
by Incredible_Serious
CVRrc wrote: ↑Sat Jan 21, 2017 5:18 pm
Thanks Alex. Looks like I would have to do the same wheel trimming but the extra bearing definitely looks worth while. The hunt begins.
Quick!
http://www.ebay.com.au/itm/122229492216
Re: Club 10 Racer
Posted: Sun Jan 22, 2017 12:15 pm
by CVRrc
I was to slow
still hunting!
Re: Club 10 Racer
Posted: Sun Feb 05, 2017 5:13 am
by Retro rc
Oops sorry bought both of his last 2
Re: Club 10 Racer
Posted: Sun Feb 05, 2017 5:39 am
by snowfox
The dual bearing hubs are very hard to find, cant belive that guy had 8 sets and I missed all of them!!
Great looking car BTW!! Should make a great racer., I know you most likely want to keep it all schumacher but you could consider running RC10 front hubs and carriers, giving you more wheel and tire choice for racing. This is what a lot of racers would have done BITD
Re: Club 10 Racer
Posted: Sun Feb 05, 2017 2:40 pm
by klavy69
snowfox wrote: ↑Sun Feb 05, 2017 5:39 am
but you could consider running RC10 front hubs and carriers, giving you more wheel and tire choice for racing. This is what a lot of racers would have done BITD
Thanx for this random thought. It explains why I have a schumacher chassis with associated front arms, hubs and carriers sitting here. Never thought of why it was like that besides the fact that you use what you have on hand when not close to a hobby shop.
Todd
Re: Club 10 Racer
Posted: Sun Feb 05, 2017 4:57 pm
by CVRrc
snowfox wrote: ↑Sun Feb 05, 2017 5:39 am
The dual bearing hubs are very hard to find, cant belive that guy had 8 sets and I missed all of them!!
Great looking car BTW!! Should make a great racer., I know you most likely want to keep it all schumacher but you could consider running RC10 front hubs and carriers, giving you more wheel and tire choice for racing. This is what a lot of racers would have done BITD
Thanks I'll look into that. I've also seen Schumie Rascal hubs and carriers being used, I might be able to find some nice purple alloy ones
Re: Club 10 Racer
Posted: Sun Feb 05, 2017 5:00 pm
by CVRrc
Retro rc wrote: ↑Sun Feb 05, 2017 5:13 am
Oops sorry bought both of his last 2
You could always give me a set out of pity
Re: Club 10 Racer
Posted: Mon Feb 06, 2017 5:17 am
by Retro rc
CVRrc wrote: ↑Sun Feb 05, 2017 5:00 pm
Retro rc wrote: ↑Sun Feb 05, 2017 5:13 am
Oops sorry bought both of his last 2
You could always give me a set out of pity
Hey bud I've pm'd you a link to a set but there is another option you can use the front of the XTR, parts numbers you need are
U2330 which gives you mk1 cougar arms, c hubs and updated hub carries that take 2 bearings
U1410 x2 which are the bearings needed
Both are still available from Schumacher and are much cheaper
http://www.racing-cars.com/images/Technical_info/Schumacher/Old%20Cars/21%20XTR%203E/Exploded%20Diagram/xtr3eexplodedweb.pdf