RC10Talk's "Low Buck Build-Off"

[Coelacanth]

Dang, I wish this was a big-buck build off cause that's all I've got going on now.

Hah, you and me both!

[PBR Allstar]

I kinda think cars that are allready built should be excluded, with that being said, I can look the other way if you take them apart "rebuild" them

[Diggley]

Would this count, or is it not Frankenstein enough?

http://www.rc10talk.com/viewtopic.php?f=33&t=12952

...maybe this will get me motivated enough to finish up a few things..

If this don't work, I've got a bunch of old Ultima parts looking for a home..hmm, & an old Nikko Rhino..

[PBR Allstar]

Is anyone going to build anything? Steve K and I are getting lonely

[mikenice]

mine is posted on here have to finish up the paint work.

[Mr. ED]

I have built something but it's slightly more on the mid-budget range. It's intended to be 'budget' for a racer though: 90% of the parts used I have one or more spares for and should not be expensive to replace.
Really needed to get that finished as it will be entered ina big race this weekend. Perhaps I can do a 'quicky' after that's over If the mrs lets me

[jwscab]

I'm still trying to decide whether or not mine will qualify.

lots of hand-made and used parts, but also some NIP cheap stuff and take-off parts from ebay. For example, I was going to use cheap threaded rod for the turnbuckles, but I didn't have any long enough. I found B4 titanium links on ebay with new ball cups from dismantled kits for roughly $13.00 for all 6 links. they are new, but I got them for a good price. another example, is I picked up some rulux wheels for another project, but they sell in packs of 4, so i really ended up with 2 complete sets of wheels. new, but not planned for this project, just wheels that were in my parts bin.....

here is the build....if this looks like it will qualify, lemme know! I still have to compile the build list, and I have some updates.

http://www.rc10talk.com/viewtopic.php?f=40&t=16813

[JK Racing]

I'm still waiting to pick up some parts/supplies to get mine going. I dont want to start and leave a project hanging until I get most the parts.

[Mr. ED]

I'm still trying to decide whether or not mine will qualify.
...

Just enter it and see what happens. I don't expect the 'judges' to be too picky seen the low numbers of entries sofar
Maybe I've mssed a rule: doe sit say anywhere how many projects you can enter

[jwscab]

nope, as far as I know, you can enter a whole bunch!

[victor_cathedral]

first off, would like to say hello to all here! im new, and hope to fit in nicely with the crowd here at RC10Talk . secondly, i got this low-buck thing in the bag ! stay tuned for some really really bad things...

[aconsola]

my entry is ready:
http://www.rc10talk.com/viewtopic.php?f=39&t=19692

[victor_cathedral]

alright, i think my low $$ creation is ready. i might end up changing a few things, ill update later (check out the snow flyin)
http://www.rc10talk.com/viewtopic.php?f=39&t=19987

:

[Johnboy72]

I was planning on entering but to be honest, I'm just cleaning up an old Cadillac, slapping on some vintage parts and building an old school EDM body. Don't really think it's what the build off was started for.

[Mr. ED]