Page 311 of 383

Re: So what did you get in the post today ???

Posted: Tue Feb 07, 2023 4:28 pm
by Retro rc
JosephS wrote: Sat Feb 04, 2023 1:39 pm I am guessing that this was from a team racer given that most of the associated parts are stamped not for resale.
Either that or a naught team driver sold on some of his parts to the previous owner😂

Re: So what did you get in the post today ???

Posted: Tue Feb 07, 2023 8:20 pm
by XLR8
silvertriple wrote: Tue Feb 07, 2023 12:09 pm it took a whlile to arrive with some additional delays but it is finally here... I finally have a Marui CJ-7 Golden Eagle Super Wheelie...
Image

And in the box there is one car (black body) and 75% of the second one (white body, new) : missing a chassis, transmission, rear axles, and front springs.
Image

And that means I will have to possibility to precisely model the CJ-7 body shell like I did for the Land Cruiser.
That looks fantastic! Another RC vehicle I neve knew existed.

By the way, does anyone know if the CJ-5 body has ever been reproduced in 1/10 scale? My brother had a Levi edition CJ (1977 I think) and I really want to make an RC model of that vehicle. Lexan is okay but hard plastic would be best. thanks.

Re: So what did you get in the post today ???

Posted: Wed Feb 08, 2023 2:10 am
by silvertriple
XLR8 wrote: Tue Feb 07, 2023 8:20 pm
silvertriple wrote: Tue Feb 07, 2023 12:09 pm it took a whlile to arrive with some additional delays but it is finally here... I finally have a Marui CJ-7 Golden Eagle Super Wheelie...
Image

And in the box there is one car (black body) and 75% of the second one (white body, new) : missing a chassis, transmission, rear axles, and front springs.
Image

And that means I will have to possibility to precisely model the CJ-7 body shell like I did for the Land Cruiser.
That looks fantastic! Another RC vehicle I neve knew existed.

By the way, does anyone know if the CJ-5 body has ever been reproduced in 1/10 scale? My brother had a Levi edition CJ (1977 I think) and I really want to make an RC model of that vehicle. Lexan is okay but hard plastic would be best. thanks.
There is a lot of interesting cars from knonw or unknown brands :-)
For the CJ-5 bodyshell, I spot a few toy grade cars with CJ-5 bodies while searching for the CJ-7 Golden Eagle. All of them seemed to be hard bodies, but it may be worth to search in this area. At the end, you may model the body, scale it up to your needs and get it printed (I may need a bit more precision than just for a rendering, however)...

Re: So what did you get in the post today ???

Posted: Wed Feb 08, 2023 4:15 pm
by Frankentruck
I got a really awesome test jig from another frozen part of Texas to support my B1 mid motor project.
(https://www.rc10talk.com/viewtopic.php?f=35&t=47408)
Very awesome Chuck, much appreciated!
.
PXL_20230208_210157781.jpg

Re: So what did you get in the post today ???

Posted: Wed Feb 08, 2023 8:30 pm
by RogueIV
Get a pair of pretty nice light grey hard body shocks from the bay to put on my JRX2
IMG_20230208_111630730.jpg
Now if I could just find a set of matching rears.

Re: So what did you get in the post today ???

Posted: Thu Feb 09, 2023 10:34 am
by morrisey0
Ascot Sprint Car Kit NIB. I wish I could afford more NIB stuff, because I completely have the childhood Christmas morning feels. :D

Re: So what did you get in the post today ???

Posted: Thu Feb 09, 2023 11:02 am
by GoMachV
Sweet! But why is it all the ascot boxes are completely destroyed lol! That’s one of the best examples I’ve seen of a good one!

Re: So what did you get in the post today ???

Posted: Thu Feb 09, 2023 12:49 pm
by XLR8
morrisey0 wrote: Thu Feb 09, 2023 10:34 am Ascot Sprint Car Kit NIB. I wish I could afford more NIB stuff, because I completely have the childhood Christmas morning feels. :D
HOLY COW! That one belongs in a museum. :D

I have a well used (mangled) Ascot in a box somewhere.

Just curious; are you planning to cut the shrink wrap??

Re: So what did you get in the post today ???

Posted: Thu Feb 09, 2023 1:51 pm
by morrisey0
GoMachV wrote: Thu Feb 09, 2023 11:02 am Sweet! But why is it all the ascot boxes are completely destroyed lol! That’s one of the best examples I’ve seen of a good one!
This one was crammed into a storage unit, which is why it is a little mangled. Pay attention to this guy: https://www.ebay.com/str/thetoyshops He recently purchased two storage units filled with thousands of pieces of 70's - 90's RC, and a lot of it is NIP. I have seen just part of the collection, and it is nice! I have been invited to walk through his stuff in the near future. He isn't giving it away though. I made him one offer on one other car (built but never ran Eliminator with #3 painted body), and I did not end up with it. :D

"HOLY COW! That one belongs in a museum. :D"

Image

This was bought so that I could actually have a Sprint car! My hand built chassis just never worked out the way I wanted it to, and I back-burner'd it quite some time ago. This kit is definitely getting opened up and used! :D

Re: So what did you get in the post today ???

Posted: Thu Feb 09, 2023 4:27 pm
by BattleTrak
BattleTrak wrote: Mon Feb 06, 2023 9:04 pm Here’s an unusual one I received today.. aluminum JRX2 spindles. If anyone knows more about this company and their parts, I’d like to hear it.

Image

Image
Here is a follow up to these parts.. NDN was a shop in Pittsfield, MA that closed down in the early 90’s. Approximately 20 sets of these aluminum JRX2 front spindles were made.

Re: So what did you get in the post today ???

Posted: Thu Feb 09, 2023 4:35 pm
by GoMachV
Got my Jake wheels for my clod today 8)

Re: So what did you get in the post today ???

Posted: Thu Feb 09, 2023 7:10 pm
by XLR8
morrisey0 wrote: Thu Feb 09, 2023 1:51 pm
GoMachV wrote: Thu Feb 09, 2023 11:02 am Sweet! But why is it all the ascot boxes are completely destroyed lol! That’s one of the best examples I’ve seen of a good one!
This one was crammed into a storage unit, which is why it is a little mangled. Pay attention to this guy: https://www.ebay.com/str/thetoyshops He recently purchased two storage units filled with thousands of pieces of 70's - 90's RC, and a lot of it is NIP. I have seen just part of the collection, and it is nice! I have been invited to walk through his stuff in the near future. He isn't giving it away though. I made him one offer on one other car (built but never ran Eliminator with #3 painted body), and I did not end up with it. :D

"HOLY COW! That one belongs in a museum. :D"

Image

This was bought so that I could actually have a Sprint car! My hand built chassis just never worked out the way I wanted it to, and I back-burner'd it quite some time ago. This kit is definitely getting opened up and used! :D
Thanks. It should make a really nice build. 8)

Re: So what did you get in the post today ???

Posted: Thu Feb 09, 2023 8:23 pm
by Lavigna
I can't seem to get enough TRX1 lately.

Re: So what did you get in the post today ???

Posted: Thu Feb 09, 2023 9:26 pm
by R6cowboy
New A-arms and suspension arms for FXT trucks.

image000000 (1).jpg

Re: So what did you get in the post today ???

Posted: Fri Feb 10, 2023 7:27 am
by morrisey0
USPS held up my Pro-2 build for 11 days with these parts. :x But they are finally here, and the build can be completed ............... hopefully.