associated fluro chassis?

[karnivool]

can someone tell me when these chassis where released? thanks

[templeofspeed]

1992.

[SteveK]

1991; the RC10T prototypes had them that spring. There is an article from RC Model Cars magazine, which ran a little before the RCCA piece, that showed Cliff Lett's truck using a cut-down nose plate from a buggy.

[karnivool]

thanks guys 92 will do me.

[MOmo]

1991; There is an article from RC Model Cars magazine, which ran a little before the RCCA piece, that showed Cliff Lett's truck using a cut-down nose plate from a buggy.

I think that was the First RCCA issue I bought, pretty sure iIstill have it too. Prior to that I had my heart on a JRX-T. Seeing that article had me looking at AE and I really haven't looked back since.



MOmo

[Bent]

Does anyone have a picture of one of these chassis.

[Bormac]

All I know is a want one!

[JPAE07]

I need a pink chassis for the nose piece I own.

[RC10resto]

[minimini]

Masami used to race his RC10 with the green tub in 1994...........

picture courtesy of http://www.geocities.jp/giequip/RC.MASAMI.html

[templeofspeed]

I built this one to run in the vintage class at the local track back in 1998... The green and pink chassis' and both truck and buggy nose plates were on clearance from AE at the time ($15 chassis, $3 nose plates... ), and it really wasn't too hard to build a complete white car with new parts.

[delsami]

that masami pis is sweet!


when i went on associateds website back in the day all they had was noses left and no chassis i will probably powder coat one of my scratched up black chassis so i can finally have one....kinda

[tizeye]

And here is my pinkie.. I thought I'd sold it to a guy in Hong Kong on ebay but no yen yet..

[Charlie don't surf]

Mine, but it's not a buggy

[m_vice]

Got a green nose plate on my runner.