What is the cheapest route for a charger for this battery. 1900mAh lipo 7.4v says not to exceed 1C charge rate
Just got a losi slider off CL with lots of aluminum upgrades and a mamba 2S castle esc and brushless setup. Tryiing to get it in running shape
Just about any lipo compatible charger should work. You can find some a little cheaper than this one, but I know people that use it and it has a lot of features and modes for the money. I'm not 100% sure what balancing tab that uses though. You can get balance boards for about $5-6 though. http://www.hobbypartz.com/thac6smbachw.html
"The world looks so much better through beer goggles: Enjoy today, you never know what tomorrow may bring." Ken
I have an RC10 gold pan that i believe is close to stock. It has an Associated motor that has a blue sticker wrapped around it. It doesn't have reverse. I want reverse! My hobby shop said it's not possible.
I'm thinking all i need is a speed...
Last post
You also need a new Hobby Shop!!!!!
^^^YEAH THIS!!!^^^
If you can afford brushless right off the bat, they can be programmed to do fwd/brk OR fwd/brk/rev. Very handy. Plus they are faster and more energy efficient which means your batteries will...
I have 4 3300mah NiMh packs that i'll be running on my losi XX at the VNats. Can I charge these packs the night before and then peake them on race day?? or should I just charge them before racing??
I always charged them at raceday, but this would...
Last post
Ok I got some info from the promatch racing guys, Great people by the way, and they said .5 or 5 millivolts per cell or 30mv for a 6 cell pack, this might be useful to others like me :roll:
I have a 6volt/12volt charger that charges at 2,4 or 6 amps.
It was originally meant for motorcycles batteries, and the like.
I now have a different charger for the bikes so it is collecting dust.
Could I change the connection on that to fit my...
Last post
now i know how turn lipos into a fire ball for fun.
Lead acid no peak detection lots of amps and fuzzzzzz
Purchased a 1/10 Losi Slider a couple of years ago with the intention of doing some dirt oval.
These years later it still hasn't seen any battery time. Not really in a position to do some oval right now, especially with a model no longer produced....
Last post
It still would make a cool buggy that is how I use the 1/18 slider.
hi
Ive just received my pb mini mustang complete with original futuba transmitter,reiever and servo.
It has also been fitted with a parma yokomo motor which appears to be period correct.
I gave it a quick run using a 3000mah 7.2v battery pack and...
Last post
I'd try the new pinion first and see where you are , mind you the Parma Yokomo is a nice vintage motor and a new Tamiya sport tuned is kind of expendable so not a bad idea .
I've got a Mini Inferno 09 (the nitro one) here that I've had for a few years, just sitting around not being used and only been run a couple times when I first bought it so it wasen't even run in completely. At the time I bought it I also...
Last post
Ah..you have a mini nitro inferno? Sorry thought you were looking for electric stuff..
I don't know how many folks took advantage of the sale on the mini b race rollers but I did.
I'm starting this thread to put some information out there, and for others to add what they learn to it.
If you have thing to add please do.
The Mini B...
Last post
Cool buggy just wish there was more of a carpet tire selection
