Since then, I have badly wanted to build one with all the nice hop-ups that I couldn't afford back then (the only one I bought BITD was a motor guard) or that were not even available here in Europe (no internet back then and very few hop-up brands available). That dream came true not so long ago when I finally gathered almost all the parts needed to start building one!
This is the pile of stuff with which I started:
![Image](http://i304.photobucket.com/albums/nn162/boudddha/Ultima/photo42.jpg)
As you can see there is:
- a never run on-road chassis that will be the donor
- a NIP Turbo Ultima chassis
- Trinity shock towers (I will have to adapt the front one)
- Trinity turnbuckles
- Composite Craft top deck
- Yokomo wheel adapters
- 48dp Robinson racing ball diff
- optional sway-bars
The tranny:
![Image](http://i304.photobucket.com/albums/nn162/boudddha/Ultima/photo22.jpg)
Trinity stuff:
![Image](http://i304.photobucket.com/albums/nn162/boudddha/Ultima/photo32.jpg)
![Image](http://i304.photobucket.com/albums/nn162/boudddha/Ultima/photo5.jpg)
This is how far I got for the moment:
![Image](http://i304.photobucket.com/albums/nn162/boudddha/Ultima/photo.jpg)
Since then, I was able to also source the following:
- Trinity 64dp spur gear and counter gear
- Trinity gold front king pins
- JC Racing wheels
- Thorp CVD's
- Roll cage
- New bodyshell with decals
The search goes on while the build is stopped because of a lack of time to be dedicated in the basement...
I am hardly looking for a NIP or like new rear motor guard!