NIB Sealed Original 1989 JRX2 Build Thread
- klavy69
- Moderator
- Posts: 5193
- Joined: Thu May 29, 2008 8:11 pm
- Location: Fulton, IL (Land of one stop light but we DO have a windmill!)
- Has thanked: 601 times
- Been thanked: 288 times
Re: NIB Sealed Original 1989 JRX2 Build Thread
I have a NIB cruise control switch for a 1983 ford escort gt. Now I know there isn't many of those around (the NIB switches or cars for that matter) but you better darn know that I'm gonna open it up and use it if the need arises .
Open it up and "fondle the sacks" and if it matters that much to you I'm sure someone out there has a shrinkwrap machine you can use to put it back to its original sale state. No one out there will ever know it was opened once (or more times) before
Todd
Open it up and "fondle the sacks" and if it matters that much to you I'm sure someone out there has a shrinkwrap machine you can use to put it back to its original sale state. No one out there will ever know it was opened once (or more times) before
Todd
Peace and professionlism.....Kabunga signing off!!!
-
- Approved Member
- Posts: 301
- Joined: Thu Sep 13, 2012 12:13 am
- Location: Mt Vernon IL
Re: NIB Sealed Original 1989 JRX2 Build Thread
I like these word they make me feel all warm and fuzzy.RC10resto wrote:I always side with leaving a kit alone if it survived so many years.
But..........................since the only barrier is shrink wrap, I would be tempted to open it up to see what variation of parts it holds. Is it a revision A, B or C etc.
I would never build it, find a nice one and clean it up.
P.S. take nice pics of it sealed and being un-sealed
"It is not how you finish but how you qualify unless you qualify bad then it is how you finish."
Words of wisdom from the Cox bros at my local track.
Words of wisdom from the Cox bros at my local track.
- GoMachV
- Approved Member
- Posts: 11768
- Joined: Mon Apr 30, 2012 2:31 am
- Location: Twin Falls, ID
- Has thanked: 920 times
- Been thanked: 2991 times
Re: NIB Sealed Original 1989 JRX2 Build Thread
Always open the shrink wrap, otherwise we will accuse you of having a "box of rocks". Happened to a member here, and it will happen again!
Then reseal. Good to go for another 25 years
Then reseal. Good to go for another 25 years
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- Diamond Dave
- Approved Member
- Posts: 1525
- Joined: Tue Nov 29, 2011 6:42 am
- Location: Calgary
- Has thanked: 642 times
- Been thanked: 117 times
Re: NIB Sealed Original 1989 JRX2 Build Thread
Serious? Someone bought a NIB item and it was "rocks"?
With out names and such, what happened?? I make use of a shrink wrap machine at work all the time.
If something comes in NIB, we wrap it even if it is still shrink wrapped and put our sticker on the outside. If something comes in new and no wrap, we wrap it and label it as house wrapped, still new.
The shrink wrap helps keep prying fingers out, or we put it behind glass. I don't doubt people do that all the time.
The amount of fake gold out there is crazy, with prices being what they are (were)... Gold is one item that is faked on a huge scale.
Side note: To any of you reading this, DO NOT BUY any gold from anyone in any parking lot, casino, beer shop, grocery outlet etc etc. They say they need gas money or whatever. Almost always stamped 18K. You will regret it.
With out names and such, what happened?? I make use of a shrink wrap machine at work all the time.
If something comes in NIB, we wrap it even if it is still shrink wrapped and put our sticker on the outside. If something comes in new and no wrap, we wrap it and label it as house wrapped, still new.
The shrink wrap helps keep prying fingers out, or we put it behind glass. I don't doubt people do that all the time.
The amount of fake gold out there is crazy, with prices being what they are (were)... Gold is one item that is faked on a huge scale.
Side note: To any of you reading this, DO NOT BUY any gold from anyone in any parking lot, casino, beer shop, grocery outlet etc etc. They say they need gas money or whatever. Almost always stamped 18K. You will regret it.
- GoMachV
- Approved Member
- Posts: 11768
- Joined: Mon Apr 30, 2012 2:31 am
- Location: Twin Falls, ID
- Has thanked: 920 times
- Been thanked: 2991 times
Re: NIB Sealed Original 1989 JRX2 Build Thread
Figuratively "rocks"....Diamond Dave wrote:Serious? Someone bought a NIB item and it was "rocks"?
With out names and such, what happened??
Charlie don't surf wrote: I don't know that you could say "worth a ton", it's worth more sealed, but in an honest auction without a mark and a shill, it's a reasonable or decent price. Not knocking that kit, but it's not an early kit, and without it being open, there is no real way to know what's in there ( I bought a SNIB 6036 Graphite team car from ebay to find it re-wrapped and full of newspaper and parts )
If you want to build it and shelve it, then have a blast doing it I say open her up
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- Diamond Dave
- Approved Member
- Posts: 1525
- Joined: Tue Nov 29, 2011 6:42 am
- Location: Calgary
- Has thanked: 642 times
- Been thanked: 117 times
Re: NIB Sealed Original 1989 JRX2 Build Thread
Open it up and see is what I say then. If it is still new, not used. Hmmm.
I have one here, BK signed on the shrink wrap. I just might have to build it.
I have one here, BK signed on the shrink wrap. I just might have to build it.
-
- Approved Member
- Posts: 695
- Joined: Fri Mar 08, 2013 10:31 am
- Location: UK, Surrey
- Been thanked: 1 time
Re: NIB Sealed Original 1989 JRX2 Build Thread
I hope you guys make sure the kits are bone dry and warm for a week before you shrink wrap them. If kits have come out of storage in a loft or basement (which is pretty common) all you are doing is trapping dampness inside the box with plastic for years. I'd always rather allow a box to breath air and keep it in a warm dry regularly used room. Just my 2p.
GARBO 1/8
- JPAE07
- Approved Member
- Posts: 517
- Joined: Sun Nov 18, 2007 1:17 am
- Location: Placentia, CA
- Has thanked: 1 time
Re: NIB Sealed Original 1989 JRX2 Build Thread
Open it up already!
Better you than someone else.
You know Losi's gonna re-pop the jr-x soon enough anyways.
Better you than someone else.
You know Losi's gonna re-pop the jr-x soon enough anyways.
- Diamond Dave
- Approved Member
- Posts: 1525
- Joined: Tue Nov 29, 2011 6:42 am
- Location: Calgary
- Has thanked: 642 times
- Been thanked: 117 times
Re: NIB Sealed Original 1989 JRX2 Build Thread
I am in!!JPAE07 wrote:Open it up already!
Better you than someone else.
You know Losi's gonna re-pop the jr-x soon enough anyways.
- huminski
- Approved Member
- Posts: 319
- Joined: Mon Sep 12, 2011 2:22 pm
- Location: South Jersey
- Has thanked: 1 time
- Been thanked: 8 times
Re: NIB Sealed Original 1989 JRX2 Build Thread
So I was checking out the old X2 this weekend, and kept obsessing on the shrink wrap. Especially this one little tear. It was really bothering me. Show here right above the wing... I went ahead and starting to see if there was a way I could seal that back up and make it less noticeable.
- huminski
- Approved Member
- Posts: 319
- Joined: Mon Sep 12, 2011 2:22 pm
- Location: South Jersey
- Has thanked: 1 time
- Been thanked: 8 times
Re: NIB Sealed Original 1989 JRX2 Build Thread
All the while..... for some reason this message on the box kept catching my eye.....
- huminski
- Approved Member
- Posts: 319
- Joined: Mon Sep 12, 2011 2:22 pm
- Location: South Jersey
- Has thanked: 1 time
- Been thanked: 8 times
Re: NIB Sealed Original 1989 JRX2 Build Thread
And then the unthinkable happened. My hand, it slipped. I tried to stop it but it was too late.... nothing I could do. Oh the humanity!!!!
- Coelacanth
- Approved Member
- Posts: 7412
- Joined: Thu Jul 29, 2010 10:20 pm
- Location: Alberta, Canada
- Has thanked: 16 times
- Been thanked: 318 times
Re: NIB Sealed Original 1989 JRX2 Build Thread
Now you gotta build it.
But beware, maybe it'll be like all those horror movies where they discover an ancient crypt or coffin or something...you'll carefully take the box lid off, and a puff of decades-old dusty air will foosh out...and who knows what's lurking inside?
Think of that short story "The Crate" from Stephen King's movie, the original Creepshow.
But beware, maybe it'll be like all those horror movies where they discover an ancient crypt or coffin or something...you'll carefully take the box lid off, and a puff of decades-old dusty air will foosh out...and who knows what's lurking inside?
Think of that short story "The Crate" from Stephen King's movie, the original Creepshow.
Completed projects: CYANide Onroad Optima | Zebra Gold Optima | Barney Optima | OptiMutt RWD Mid
Gallery - Coel's Stalls: Marui Galaxy & Shogun Resto-Mods | FrankenBuff AYK Buffalo | 1987 Buick GNX RC12L3
Gallery - Coel's Stalls: Marui Galaxy & Shogun Resto-Mods | FrankenBuff AYK Buffalo | 1987 Buick GNX RC12L3
- huminski
- Approved Member
- Posts: 319
- Joined: Mon Sep 12, 2011 2:22 pm
- Location: South Jersey
- Has thanked: 1 time
- Been thanked: 8 times
Re: NIB Sealed Original 1989 JRX2 Build Thread
All at once I was horrified and thrilled. And then it hit me, I can finally silence all those bozos on 10talk that said it was probably just full of rocks.
So I opened up.
And turns out the guys were right. But it wasn't rocks.
Not a box of rocks....... IT WAS A BOX OF SOCKS!!!!!!!!!!!!
I am so pissed right now...............
So I opened up.
And turns out the guys were right. But it wasn't rocks.
Not a box of rocks....... IT WAS A BOX OF SOCKS!!!!!!!!!!!!
I am so pissed right now...............
- Coelacanth
- Approved Member
- Posts: 7412
- Joined: Thu Jul 29, 2010 10:20 pm
- Location: Alberta, Canada
- Has thanked: 16 times
- Been thanked: 318 times
Re: NIB Sealed Original 1989 JRX2 Build Thread
Oh, now I'm SURE that some nas-T decades-old stinky air fooshed out of that box when you opened it!
Completed projects: CYANide Onroad Optima | Zebra Gold Optima | Barney Optima | OptiMutt RWD Mid
Gallery - Coel's Stalls: Marui Galaxy & Shogun Resto-Mods | FrankenBuff AYK Buffalo | 1987 Buick GNX RC12L3
Gallery - Coel's Stalls: Marui Galaxy & Shogun Resto-Mods | FrankenBuff AYK Buffalo | 1987 Buick GNX RC12L3
-
- Similar Topics
- Replies
- Views
- Last post
-
- 78 Replies
- 11761 Views
-
Last post by jamin
-
- 80 Replies
- 8957 Views
-
Last post by R Cane
-
- 2 Replies
- 2633 Views
-
Last post by GoMachV
-
- 9 Replies
- 1813 Views
-
Last post by turbo scorpion
-
- 51 Replies
- 11533 Views
-
Last post by hugger19
-
- 4 Replies
- 2114 Views
-
Last post by Timmy
-
- 28 Replies
- 2565 Views
-
Last post by Heffay
-
- 559 Replies
- 53694 Views
-
Last post by Rcforme
Who is online
Users browsing this forum: CommonCrawl [Bot] and 1 guest