Team Losi XX-CR Kinwald Edition NIB Sealed!
- jamin
- Approved Member
- Posts: 1157
- Joined: Thu Dec 16, 2010 10:58 am
- Location: Suffolk, UK
- Has thanked: 1 time
- Been thanked: 25 times
Re: Team Losi XX-CR Kinwald Edition NIB Sealed!
Duplicates would be the ultimate, but I don't think I'd buy another Kinwald kit if I saw one - I'd want to leave it for someone else to enjoy. If you have two then leaving one NIB makes sense.
Team Losi: XX-CR | XXT | XXT-CR Graphite+ | XX4 | Street Weapon IWC Edition
- DerbyDan
- Approved Member
- Posts: 1836
- Joined: Tue Sep 08, 2009 12:04 pm
- Location: Northampton UK
- Has thanked: 2 times
- Been thanked: 19 times
Re: Team Losi XX-CR Kinwald Edition NIB Sealed!
Thing is, you have to keep this whole vintage R/C collecting thing in perspective, it only really offers any interest to a very small percentage of people - & I doubt whether in two hundred years time anyone would be too bothered if they found a Losi XX Kinwald whether it was sealed NIB or not? In the grand scheme of things, these R/C cars of ours do not offer THAT much historical importance - so we should as individuals, or as a collective group, enjoy our cars how we see fit because it is this generation only that will fully appreciated them with the memories & excitement that they install.
My T.C Showroom; http://www.tamiyaclub.com/member.asp?id=28990
- jamin
- Approved Member
- Posts: 1157
- Joined: Thu Dec 16, 2010 10:58 am
- Location: Suffolk, UK
- Has thanked: 1 time
- Been thanked: 25 times
Re: Team Losi XX-CR Kinwald Edition NIB Sealed!
Completely agree Dan, for me it's build it and share with the forum for others to enjoy also. We should be lucky we are the generation that raced through the early rears of RC racing and the history attached to it.
I need to start this build soon!
I need to start this build soon!
Team Losi: XX-CR | XXT | XXT-CR Graphite+ | XX4 | Street Weapon IWC Edition
- jamin
- Approved Member
- Posts: 1157
- Joined: Thu Dec 16, 2010 10:58 am
- Location: Suffolk, UK
- Has thanked: 1 time
- Been thanked: 25 times
Re: Team Losi XX-CR Kinwald Edition NIB Sealed!
Right, this car is nearly on the table. I've ordered a new graphite pivot plate as the one in the kit looks plastic and doesn't have the graphite logo on it.
I want to try and keep this a stock build, but my question is should I at least add a trinity front and rear brace to it? Or not bother? I know the blue of the motor plate is nowhere near that of the Trinity blue, so it might look a little odd. Hmm.
I want to try and keep this a stock build, but my question is should I at least add a trinity front and rear brace to it? Or not bother? I know the blue of the motor plate is nowhere near that of the Trinity blue, so it might look a little odd. Hmm.
Team Losi: XX-CR | XXT | XXT-CR Graphite+ | XX4 | Street Weapon IWC Edition
-
- Approved Member
- Posts: 689
- Joined: Thu May 29, 2008 2:37 pm
- Location: London
Re: Team Losi XX-CR Kinwald Edition NIB Sealed!
I think you should go stock all the way, I would have built it as if I got it for xmas!! I would also have tried to find the correct era electrics.jamin wrote:Right, this car is nearly on the table. I've ordered a new graphite pivot plate as the one in the kit looks plastic and doesn't have the graphite logo on it.
I want to try and keep this a stock build, but my question is should I at least add a trinity front and rear brace to it? Or not bother? I know the blue of the motor plate is nowhere near that of the Trinity blue, so it might look a little odd. Hmm.
But this is your build, do whatever makes it fun!
- jamin
- Approved Member
- Posts: 1157
- Joined: Thu Dec 16, 2010 10:58 am
- Location: Suffolk, UK
- Has thanked: 1 time
- Been thanked: 25 times
Re: Team Losi XX-CR Kinwald Edition NIB Sealed!
Good point, not a fan of electrics though - I could stretch to a motor perhaps, not sure what Dirtinator motor would be period correct for the car though, D2?fakiee wrote:I think you should go stock all the way, I would have built it as if I got it for xmas!! I would also have tried to find the correct era electrics.jamin wrote:Right, this car is nearly on the table. I've ordered a new graphite pivot plate as the one in the kit looks plastic and doesn't have the graphite logo on it.
I want to try and keep this a stock build, but my question is should I at least add a trinity front and rear brace to it? Or not bother? I know the blue of the motor plate is nowhere near that of the Trinity blue, so it might look a little odd. Hmm.
But this is your build, do whatever makes it fun!
I'll probably skip the trinity bits, all my cars are kitted out that way already.
Team Losi: XX-CR | XXT | XXT-CR Graphite+ | XX4 | Street Weapon IWC Edition
- DerbyDan
- Approved Member
- Posts: 1836
- Joined: Tue Sep 08, 2009 12:04 pm
- Location: Northampton UK
- Has thanked: 2 times
- Been thanked: 19 times
Re: Team Losi XX-CR Kinwald Edition NIB Sealed!
...... waiting with bated breath! 

My T.C Showroom; http://www.tamiyaclub.com/member.asp?id=28990
- LosiXXkid
- Approved Member
- Posts: 757
- Joined: Sun Mar 03, 2013 10:35 pm
- Location: Islington, North London
- Has thanked: 2 times
- Been thanked: 8 times
Re: Team Losi XX-CR Kinwald Edition NIB Sealed!
Slice those bags open (....carefully)! 

~I'm a lot older now than I was then and wish that I knew then what I know now~
- jamin
- Approved Member
- Posts: 1157
- Joined: Thu Dec 16, 2010 10:58 am
- Location: Suffolk, UK
- Has thanked: 1 time
- Been thanked: 25 times
Re: Team Losi XX-CR Kinwald Edition NIB Sealed!
Hehehehee! I feel a little bit of pressure to do this right!
Once I get the pivot plate I'll make a start, stay tuned!
Once I get the pivot plate I'll make a start, stay tuned!
Team Losi: XX-CR | XXT | XXT-CR Graphite+ | XX4 | Street Weapon IWC Edition
- jamin
- Approved Member
- Posts: 1157
- Joined: Thu Dec 16, 2010 10:58 am
- Location: Suffolk, UK
- Has thanked: 1 time
- Been thanked: 25 times
Re: Team Losi XX-CR Kinwald Edition NIB Sealed!
Well, that part has just arrived, thanks to Dan @ Sabulatech
I havent checked all the graphite parts yet, but I hope they are all with the silver logo.
Best I make a start on this soon then

I havent checked all the graphite parts yet, but I hope they are all with the silver logo.
Best I make a start on this soon then

Team Losi: XX-CR | XXT | XXT-CR Graphite+ | XX4 | Street Weapon IWC Edition
- DerbyDan
- Approved Member
- Posts: 1836
- Joined: Tue Sep 08, 2009 12:04 pm
- Location: Northampton UK
- Has thanked: 2 times
- Been thanked: 19 times
Re: Team Losi XX-CR Kinwald Edition NIB Sealed!
Cool - just checked in on Sabulatech & picked myself up a Graphite rear plate too - thanks for the prompting Ben - it was the last one in stock!
My T.C Showroom; http://www.tamiyaclub.com/member.asp?id=28990
- jamin
- Approved Member
- Posts: 1157
- Joined: Thu Dec 16, 2010 10:58 am
- Location: Suffolk, UK
- Has thanked: 1 time
- Been thanked: 25 times
Re: Team Losi XX-CR Kinwald Edition NIB Sealed!
He had three when I got one last week! They're selling like hot cakes!!
Team Losi: XX-CR | XXT | XXT-CR Graphite+ | XX4 | Street Weapon IWC Edition
-
- Approved Member
- Posts: 86
- Joined: Sat Jan 24, 2015 5:42 pm
- Location: New York, USA
Re: Team Losi XX-CR Kinwald Edition NIB Sealed!
I am late to the party. What did this kit sell for OP?
Losi XXT build (sold): http://www.rc10talk.com/viewtopic.php?f=27&t=39172
Losi XX-CR BK build: http://www.rc10talk.com/viewtopic.php?f=27&t=37851
Losi XXT-CR build (sold) http://www.rc10talk.com/viewtopic.php?f=27&t=38786
Losi XX-CR BK build: http://www.rc10talk.com/viewtopic.php?f=27&t=37851
Losi XXT-CR build (sold) http://www.rc10talk.com/viewtopic.php?f=27&t=38786
- jamin
- Approved Member
- Posts: 1157
- Joined: Thu Dec 16, 2010 10:58 am
- Location: Suffolk, UK
- Has thanked: 1 time
- Been thanked: 25 times
Re: Team Losi XX-CR Kinwald Edition NIB Sealed!
I got it for a bargain £200isles1 wrote:I am late to the party. What did this kit sell for OP?

Team Losi: XX-CR | XXT | XXT-CR Graphite+ | XX4 | Street Weapon IWC Edition
- DerbyDan
- Approved Member
- Posts: 1836
- Joined: Tue Sep 08, 2009 12:04 pm
- Location: Northampton UK
- Has thanked: 2 times
- Been thanked: 19 times
Re: Team Losi XX-CR Kinwald Edition NIB Sealed!
Its always worth a look on Dan's site - he seems to regularly update it with new stock... he even has some of the rare front arms (original Losi & RPM) in at the moment! 

My T.C Showroom; http://www.tamiyaclub.com/member.asp?id=28990
-
- Similar Topics
- Replies
- Views
- Last post
-
- 44 Replies
- 9837 Views
-
Last post by LosiXXkid
-
- 0 Replies
- 234 Views
-
Last post by Dangeruss
-
- 90 Replies
- 13806 Views
-
Last post by huminski
-
- 0 Replies
- 612 Views
-
Last post by mytimac
-
- 11 Replies
- 1367 Views
-
Last post by RCveteran
-
- 9 Replies
- 1966 Views
-
Last post by DrumAnBass
-
- 47 Replies
- 7583 Views
-
Last post by LosiXXkid
-
- 19 Replies
- 4255 Views
-
Last post by jamin
Who is online
Users browsing this forum: CommonCrawl [Bot] and 6 guests