RC10 team pit stop tranmission

[krate-mayhem]

Hi all found this RC10 team pit stop transmission in my parts boxes I think I wanted to make a 4x4 RC10 with it back in the 80s,has anybody used this transmission on there cars.
Team Pit Stop transmission for RC 10 by krate-mayhem, on Flickr

[GoMachV]

Those are a cool trans. Haven't held one in years but used them back in the day

Check out Phin's build thread here...he built your 4wd
http://www.rc10talk.com/viewtopic.php?f=35&t=35464

[Phin]

...
Check out Phin's build thread here...he built your 4wd
http://www.rc10talk.com/viewtopic.php?f=35&t=35464

I'm not sure "built" is the right word.

[GoMachV]

He "had his way" with your build? looks like a build to me!

[Phin]

Built would indicate that the car was finished.

Car is still as it is in that thread. Found that the short arms were too swept back with the front diff in that position and while deciding how to proceed my interest in building any RC (not just that 4wd) has gone to pot.

[krate-mayhem]

Hi all some of my parts for my projects and thanks for the info,think I will move my post to Other Makes/Models is that better
IMG_9530 by krate-mayhem, on Flickr
RC10 MIP 4x4 by krate-mayhem, on Flickr
MIP 4x4 RC10 Tamiya parts (Medium) by krate-mayhem, on Flickr

[GoMachV]

...you have our attention

[slow_jun]

and mine

[shodog]

Very cool collection of MIP parts. I don't see the MIP rear tranny though. are you going to use this team pitstop tranny with that MIP 4x100 4wd ?

[Phin]

Very cool collection of MIP parts. I don't see the MIP rear tranny though. are you going to use this team pitstop tranny with that MIP 4x100 4wd ?

TPS trans wouldn't work....no idler gear.

[shodog]

Very cool collection of MIP parts. I don't see the MIP rear tranny though. are you going to use this team pitstop tranny with that MIP 4x100 4wd ?

TPS trans wouldn't work....no idler gear.

agreed. From reading his first post in the thread he says "I think I wanted to make a 4x4 RC10 with it back in the 80s"

He really needs the proper MIP transmission. with this front tranny you need to come off the top shaft of the rear.

[Phin]

Hopefully he's got four...three to match his front boxes and one extra to send me.

The Rc10 black case trans are easy enough to find and he could make a stock Tamiya trans work for the Srb build.