Work in progress.
Chassis from Jeff ´Factory Works`
Scorpion rear arms and wheels
Original 6 gear.
I´m not sure about the nosepiece but it was old and black to begin with
Rest is RC10 Classic parts, with a little help from an Ultima RB6
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas Factory Works website
Very nice Dennis. Are those Scorpion wheels? Very cool!
I had a 1:1 street car bitd with Centerline wheels. Like blue jeans and apple pie, some things never go out of style.
hi guy's i was wondering what difference does the trailing arm makes on the track.ive always run cars whit a-arm and i wonder if it does make more or less
traction.i know that it must have less side bite because of the lack of camber gain but how...
Last post
thanks alot. 8) i should have used the search button :oops: :oops: sorry about that.realy interesting thread thought.
I have been wanting to start a project to race on a large MX style track predominantly used by 1/8 cars and trucks. I love the way a trailing arm car runs and handles. The track is loose and rough with huge jumps. It will be a 10th scale buggy built...
Last post
What I found with my trailingarm racer was that it's difficult to get enough suspension travel without running into extreme angle or angle changes.
I Think the solution would be to use longer arms but don't have the tools to make something descent.
Through my eBay fun, I have ended up with a spare set of trailing arms set up (Andy's/S&K) and have this question to the guys who have actually run trailing arms....
What does it do to the handling of the car? Too much rear traction, making the car...
Last post
I think you will find that most molded graphite tubs will lack the strength for a suspension mount of that variety. Specifically, I think you will have to grind off the edge of the tub to get the suspension block to fit, and I don't think the...
Why have I bought this :? I think it's because you guys kept snapping them up so I figure they must be a decent deal. I have no donor parts left to build it so I'm going to have to start all over again, this one could be a real long drawn out...
Last post
i wish i knew you had rc-10 towers when i ordered the lethal weapon parts from you a week ago i would have got a set. you didnt happen to send out the missing tranny brace yet, if so wait and i will send money for towers too.
I'm new to the forum but not new to the hobby. I began racing before the release of the RC10 and have raced every version since it's release. It's great to see the interest in the vintage cars! Unfortunately, I tossed all my equipment...
Last post
Apparently Duratrax 2.2 wheels for the Evader will fit too, they have the correct offset and are readily available from Tower. The plastic isn't as nice as the current wheels but probably good enough. I haven't tried them yet, still deciding if I...
I got a car and a box full of parts from a local racer at our track. The car is A&L trailing arm car from very late 1980's or early 1990's, but he couldn't remember the exact year when he had last time raced it. The car itself is not in very good...
Last post
Man that pile of parts sure did end up being one sweet low slung racer. Killer build, about as trick as it gets.
Very nice! I'm a big fan of the trailing arm thing.
CommonCrawl [Bot] and 0 guests