Page 1 of 1
My RCovid10 Project
Posted: Mon Mar 30, 2020 6:08 pm
by limestang
I’m sure many can relate to cabin fever due to the Covid19. I gathered a bunch of parts and built this RCovid10. Some of the parts include: Sassy chassis, Rogue wheels, Losi Bellcrank, RPM nose, RPM gear cover, alloy shock spring collars, and dhawk alloy parts.
- Limestang
Re: My RCovid10 Project
Posted: Mon Mar 30, 2020 6:51 pm
by shodog
Nice! Heavy Metal edition for sure. How do you like the Rogue jelly bean’s
Re: My RCovid10 Project
Posted: Mon Mar 30, 2020 7:55 pm
by GeneralZod
The Orion motor looks good in there! Very nice overall!
Re: My RCovid10 Project
Posted: Mon Mar 30, 2020 8:42 pm
by limestang
I really like the rogue wheels and knock-offs. I had to convert the front axles to 4-40. I also did a few mods to the wing tubes (notch for dhawk setscrew, shortened length, machined a decorative band to match body mounts, and chamfered the wing wire holes for easier install). Also, found something to use the plastic knock-Offs for:)
Re: My RCovid10 Project
Posted: Tue Mar 31, 2020 9:36 am
by KidAgain
Very nice bud looks great.............
Re: My RCovid10 Project
Posted: Tue Mar 31, 2020 11:11 pm
by limestang
Thanks - i appreciate the kind words:)
-limestang
Re: My RCovid10 Project
Posted: Wed Apr 01, 2020 2:12 am
by ChisaiKuso
limestang wrote: ↑Mon Mar 30, 2020 8:42 pm
Also, found something to use the plastic knock-Offs for:)
Re: My RCovid10 Project
Posted: Wed Apr 01, 2020 4:34 pm
by radioactivity
Very nice build
The rear stub axels have me stumped. I don't remember ever seeing those before.
Chuck
Re: My RCovid10 Project
Posted: Wed Apr 01, 2020 7:50 pm
by limestang
Thanks, glad you like it. I believe they are from an Rc10T2. For some reason Dhawk went with the newer style Axle.
-Limestang
Re: My RCovid10 Project
Posted: Wed Apr 22, 2020 10:57 pm
by Dbar1681
Nice job. Looks great!!
Re: My RCovid10 Project
Posted: Tue May 05, 2020 10:07 pm
by Jeep-Power
Great build.
So many questions-
How much does it weigh?
How do ypu like the fit & finish of the Dhawk parts?
What is the part # of that RPM gear cover?-- EDIT --
found it
Re: My RCovid10 Project
Posted: Wed May 06, 2020 7:58 pm
by limestang
Jeep-Power wrote: ↑Tue May 05, 2020 10:07 pm
Great build.
So many questions-
How much does it weigh?
How do ypu like the fit & finish of the Dhawk parts?
What is the part # of that RPM gear cover?-- EDIT --
found it
As shown with the addition of an unpainted body 1lb 13oz. Dhawk parts fit pretty well. I had some issues with the hinge pins being a tight fit. I put the he hinge pin on an electric drill and essentially reamed the hole.
Hope this helps
- Limestang
Re: My RCovid10 Project
Posted: Sun May 10, 2020 10:31 am
by Jeep-Power
limestang wrote: ↑Wed May 06, 2020 7:58 pm
As shown with the addition of an unpainted body 1lb 13oz. Dhawk parts fit pretty well. I had some issues with the hinge pins being a tight fit. I put the he hinge pin on an electric drill and essentially reamed the hole.
Hope this helps
- Limestang
wow - 29oz- that is surprisingly light! - my all stock goldpan, without motor & body - with wheels, is 32oz - my sons '10, RTR, less battery, is 44oz
I thought, for sure, it was going to be heavy