Yokomo wheel offset -conclusion-

[sandkil]

I need some help from you guys.
Is there a Yokomo wheel that has a offset that is between ZC-827C and ZC-835?
I have a pair of ZC-827C and they rub the steering knuckles and at full steer the shocks.
and I tested a pair of ZC-835 and then the car becomes too wide.

Picture with Kyosho 2.2"

[sandkil]

Digging, searching and asking.
If any wrongs please feel free to comment


Rear Offset
ZC-805 DEEP DISH
ZC-825 = 2,15" DEEP DISH
ZC-827 = 2,15" FLAT DISH 6,0mm
ZC-835 / 30 (RC10) DEEP DISH 12mm
ZC-837 / 30 FLAT DISH 6,0mm


Front
ZC-800 = 2.0"
ZC-801 = 2.0"
ZC-831
ZC-821
ZC-822 offset 9,0mm


ZC-800-801-805 YOKOMO 870C
ZC-827 YOKOMO YZ10 91 93 WORKS
ZC-835 YOKOMO 870C
ZC-837/831 YOKOMO YZ10 91 92 WORKS PAVIDIS

ZC-825 = 2.15"
ZC-827 = 2.15"
ZC-83X (30) = 2.2"

[aip47-2008]

Digging, searching and asking.
If any wrongs please feel free to comment


ZC-822 has completely different off set compared to other front wheels!

[sandkil]

ZC-822 has completely different off set compared to other front wheels!
100_5461_zps8408d240.jpg

Thank you for this, aip47-2008. I have now updated above.

Are the ZC-822 2.15" or 2.2" wheels?

[jwscab]

This is really good info sandkil. This is a tough subject to gather the facts on, but you did a great job! Sorry I can't be of more help. I can tell you the offset difference between 870c and later yz10, when the arms changed shape. The rear wheels have about a 7mm offset difference. The fronts are something like 2-3mm.

this is comparing 2.0" 870c wheels to the yz10 wheels available from jc racing(UK).