The ultimate Mini JRX2 thread

[GoMachV]

Oh, and I finally sorted the body mount/post for my A&L towers too.

[RCveteran]

I think we can compromise on the XT chassis. Just need the Body, Body Mounts and wheels and tires. Close enough. Technically the Pro needs a different chassis too but take what we can.

That said, anecdotally seems these are a hit worldwide. Horizon has the deep pockets and a different chassis they could handle easy enough.

[clm]

The body mount files that I posted would cover the body mount needs of the Jrxt I just need to enlarge the hole in the front of the skidplate a tad for the screw head, the front is a little tricky to print the back is easy peasy.

only need body, chassis, and wheels/tires for the jrxt

Oh yeah I say the Ender 3's are good as well, I bought one.. then bought a second. I have the Pro models because they said the power supply was better.. The main one I am using I have swapped to the Ender 3 glass bed as the only mod.. been using it nearly 2 years now and only replaced nozzles

[dldiaz]

Use the steering rate (SR) adjustment.

Right, but that leaves me with full steering-lock to the right and only about 70% steering to the left...

[BattleTrak]

Use the steering rate (SR) adjustment.

Right, but that leaves me with full steering-lock to the right and only about 70% steering to the left...

You should remove servo saver, center transmitter while powered up, then reinstall servo saver making sure steering bellcranks are straight. Also check tie rod lengths..

[juicedcoupe]

Use the steering rate (SR) adjustment.

Right, but that leaves me with full steering-lock to the right and only about 70% steering to the left...

You should remove servo saver, center transmitter, then reinstall servo saver making sure steering bellcranks are straight. Also check tie rod lengths..

This.

[BattleTrak]

Can someone post a link to get the nylon nuts?

I have been using ones out of my stash… but looking around, it’s kinda dry! OldRC has some..

https://www.ebay.com/itm/265534299397?hash=item3dd313dd05:g:T-YAAOSw2DNh~dXH

[GoMachV]

Pack of 100 white nylon with the flange just like OG
https://www.mcmaster.com/#94909A005

[WriteDean]

Changed orientation. Much less flex/much stronger.

[RCveteran]

Looks perfect! I'd buy one.

[clm]

Ok parts absolutely nobody ask for or wants because I don't want to buy bearings for the mockup car!

I guess they are good if someone wants to build a shelfer and make it look right.

Flexy Turners: https://cults3d.com/en/3d-model/game/losi-mini-jrx2-vintage-style-servo-saver-bellcranks-without-bearings

Bumper looks great, glad to see everyone has had good luck printing them Chassis is almost done, printing another hole calibration part right now

[OptimaZe]

Got an email that my hat from the pre-order is on the way. Hope everyone else is getting one too.

[clm]

Update!

My chassis design has been updated, there has been a thorough tweaking of the model to more correctly represent the size difference of the Molded and Jrx2 chassis. If you grabbed it before grab a new one! I will do up a chassis brace soon.

I also have more parts in the mail so will be able to work on h-arm models on thursday!

Here is a pic of the differences!

[GoMachV]

Doh!

[clm]

Doh!

DOH! Sorry Jeff! I did say it was a work in progress, I spent all day adjusting things very carefully