RC10Talk - The Net's Largest Vintage R/C Community

RJ Speed Pro Mod . I don't really know much about RC Drag cars just picked this kit to build during the lockdown. Added the camaro body, aluminum clamping rear hubs with BSR tires and wheelie bar.

The RC10 can become a money pit when changing over to 12mm hex wheels because of the differant wheel offset with the newer hex wheels.

Did the ESC come with a manual or program card ? Is your battery fully charged ? Any LED's or set button on the ESC ? Throttle trim set at zero and throttle end points at 100% on your radio . Maybe you have to set up the throttle ends points on the ESC (Full forward, neutral, Full brake.) using the ...

Scorpion/tomahawk tires may fit the three piece rims but the compound might be too soft for the tire beads to stay clamped.

In the past they were using the SC10/b4.2 parts for the front , caster blocks I think 25 degree, steering blocks, axles, hex's, bearings etc. You have to drill out the lower hinge pin on the caster block to 1/8 inch. The rear is just a matter of installing a hex adapter but you will need 3/16 axles ...

RC10L4 oval chassis. Protoform Gen3-C Light Weight Body. BSR tires/wheels. Mark Martin #5 Go Daddy 2010.

RC10L . McAllister Nissan GTP body . MCI decals . Jaco wheels .

RC10GT .

Valkyrie has them but they are pricey . #6614B
https://www.valkyriercmotorsports.com/store/p305/Associated_RC10_6_Gear_Edinger_Idle_Gears_Black_%282%29_6614_B.html

Ok . Maybe another member will have better info .

For the rear mount you can use the buggy body post and wing tubes . For the front I would change the steering over to the worlds set up and use a 7/8 x 8-32 screw on one side for the front buggy body post . Also mount the steering in the front holes on the nose plate using button head screws . The w...

CRC 4-40 ball studs .
https://www.amainhobbies.com/crc-440-anodized-ball-studs-4-cln1409/p33047

RC10 B3 . Don't run it much . Deja Vu body with a attempted B2 paint job . Converted over to hex wheels .

It's a tribble from Star Trek .

RC10 with a few upgrades .