Looking at rebuilding my first RC10. It seems most are running a modern wheel tire upgrade but I prefer to use the original size rims for bashing. Does anyone know of or use an AVAILABLE tire set-up that would also look decent on the shelf?
Know if the Kyosho Scorpion/tomahawk tires fit?
It seems the Proline classic tires are long gone or super pricey.
Thanks
I happened upon some HPI wheels and tires that fit mine, but not sure which model they are from. Give me a few days and i will seeif i can figure it out. I realize this doesn't satisfy your original rim need, but might be an acceptable option.
I have been reading around the forums and I have a few questions about getting newer rims and tires on my old RC10. I am assuming that if I can't find the original rims and tires for my buggy, do I have to convert the rear axles to 3/16 to put new...
Ok I'm at my wits end with this and I would like any help. I missed the boat when they were making tires and rims for the RC10 a few years back. I know there are rims still being made by JConcepts but tires are the bane of my existence. I'm willing...
Last post
Doug
I did dye the wheels for the Houge before I painted them.
Totally forgot about that until just now
They took dye as well as any other nylon I have done.
Chuck
Thanks Chuck, that’s good to know. I could order a few sets in white then dye...
I have this question, and it may have been asked before; did AE ever make the original tires for the kit, the RC10T team car that is shown on the box art and in the ads at the time (see pic).
Every rebuild of the original I see has...
Last post
found a set of fronts! minor damage to the front outside beads, but in overall good shape!
Hey guys, I have a rc10t3 and am looking into getting new rims and tires. Im looking for more of a street tire set up. Have seen lots of rims, but not sure which ones will bolt up. Any advice will be great. Thanks
Last post
didn't realize they only had yellows for fronts. Might wanna check a little deeper into that one since I've had complete sets of front's and rears in white and in yellow. The quick change rears are for like the gt2 for sure that had the quick change...
I thought these might look nice on my RC10 when I finally get around to finishing it..as I'm gonna polish the chassis......16$ shipped, so I
feel I could not really go wrong here....
Last post
I actually have a Set of Rears, but those are to nice, AND CHEAP, for anyone to pass up. How long were they Up?
Prob not more than an hour......I have a few toolbar Firefox bookmarks that sort newly listed for a few things.....
I have a very nice set of JRX2 tires that are glued to the rims. I want to remove the tires from the rims but not destroy the rubber in the process. Any suggestions?
Cheerz
Last post
Old thread I know but this is good info. I bought a Marui car, was supposed to be a Ninja but is in fact a Coor's/Melling Stock car. The tires are heavily glued to the rims of course. :? I was going to toss them in the acetone but luckily the car...
Im looking for tires that fit 2.0 rims. Most everything on ebay that comes up in a search of 2.0 tires is a proline 2.0 which does not refer to size, but rather a version type and most are 1/8 scale. Anybody have parts numbers for different brands...
Last post
i am rebuilding my optima mid and was looking for some asphalt tires for screaming around my neighborhood. I found these that fit perfectly. just about the same dimensions as the original tires. They are for a hpi WR8. most 1/10 scale street tires...