Hey guys, I got this body with a vintage RC10L, unpainted and without the outer protective film, pretty beat up from shelf wear. One night after a few drinks, I came up with a paint layout, based on another artists flames found online. Not sure who...
Long title I know, but some things just can't be avoided. Like burning the roof of your mouth on that first Pizza Roll, wearing your fingers to the bone assembling brand new turnbuckles, or waking up next to a fat chick after doing tequila shots in...
Last post
Silver is opaque but will darken lighter colors its painted on top of.
Use white to prevent darkening.
I do PS1 White then PS12 Silver before over coating that with PS5 Black for show shells.
Total blackout so body colour can't be seen thru...
Here are my two rattle can attempt for my RC10 ladies.
I think it is not to bad for a rattle can :oops:
Would be nice to get feedback from more experienced painter :)
Greetings
Raimund
Last post
I'm no good at painting as I don't have the patience but always find the blending/fading the trickiest bit with cans as the spray patterns are too large.
I assume you used a stencil for the detail in the splashes? I've used cardboard at various...
I hate to be that guy again.
But I got huge box of stuff and this part has me stumped. It had an A&L header card with no label but I contacted A&L and they said it wasn't ever made by them.
It looks like maybe Lexan wheel fenders maybe for some...
HI !... Anyone have any good pics of the RC10's driver figure in boxart/manual colours? I'm starting to paint mine soon. From what i have seen, its basically like this :
- driver suit = RED
- helmet = WHITE
- cockpit = FLAT BLACK
- dash/steering...
Last post
there's a pretty good one on ebay:
how did yours turn out? it doesn't look like the box art driver is the lexan one included in the kit.
I recently picked up a rattle can from Tamiya called Lame flake, the top says paint black over the top, so is this just clear with flake or black flake like the paint can top suggests? Getting nothing from the Tamiya site.
Last post
$ 15 for a can, good news it can be used with any color you like. It was easy to use and make look good, 2 light coats and on with the color, I'll try to post the finished body as soon as I get it mounted up. Thanks for your help.
Im wanting to put a tire rack on the back of this truck body, but as im seeing places nobody sells any. So I am going to probably make one. Can anybody tell me the best material to make it out of. I dont know about metal tubes, but if I have to I...
I finally got my b5m, got it built and painted. The paint scheme is inspired by martini racing colors. Not as clean as I'd like in some places, but I'm pretty happy with it. Tell me what you think!
ImageUploadedByTapatalk1400639873.994317.jpg...
Last post
I dig it! Always had a soft spot for Martini Porsches.
So I really dont have any clue how it happened. So A painted body I have has been flaking off leaving perfectly clear lexan exposed again. It had been happening just around the edges but it started to spread all over the place. At this point, the...
Last post
It looks like one version of the De-Solv It can be purchased at Home Hardware in Canada, I'll have to check it out:
Hey guys, been away for a while working like mad, but was able to have some fun with body paint. This one is based on CE the manual art. I wanted to try this style of masking while I have a pile of clear bodies waiting for paint. The buggy itself is...
Last post
Matched the wing paint to the rear of the body, what a pain in the a$$... :D Working on some more stickers when I get some free time, then the nets, then to smooth sand the edges. Might go with TQ-71 front ribs, not sure yet.
was doing a search for liquid mask .. hobby store cant get it .. and ran into this video to remove paint from both body types
a little work .. would be good for rare bodys
085nJyj4TBM
Last post
Fyi, i discovered, completely by accident a way to get old paint of lexan. Not exactly sure what paint it effects as it was a prepainted body. Use the citris base cleaners u would use to get old stickers off things. I was cleaning some very old...
I have a restoration project that will be close to finish soon. I am going to order the body from TBG. I have some painting experience, but never painted an rc body before. What is the best way to get nice results? I do have an airbrush I bought...
Last post
Has this ever happened to anyone else? I don't see why the paint will not adhere in those tight corners. Could it be that I didn't wash good enough in those tight areas? I removed most of the paint and tried it again and got the same results :roll:...
i usually go with blue or silver or black or hot pink....pink for reasons of cancer research support. how i came to these colors on this b5m body i guess is chance. let me know what you think.
Last post
i definitly hit the easy button on this paint job. the lines of the body flow so nicely that it made sense to exploit them by laying down the stripes with the body lines. im looking at all the body manufactures for their offerings so i can plan my...
I can't say that I've ever tried layering paint like this so it was quite an interesting experiment for me. I shot the black metallic + a little silver metallic first, then cracked the masks and had at it with the secondary colors to make this...
Last post
Part 2 of the candy metallic B3's :mrgreen:
The kiddo needed a new body too so we sat down and drew something up. For some reason he immediately gravitated towards tribal flame type artwork I did. Personally I'm not really a fan of tribals however...
So these are my first bodies...learned alot while working on them...I don't think they came out half bad. Big thanks to James at Rite Eye Designs for always answering my ridiculous questions
With my 22-4
Last post
ha...thanks, it was never meant to be a skyline (city scape) but that is what everyone sees...i just cut the masking randomly....
off of Ebay... Its the best first gen RC10 reproduction body I have ever seen. It just so happens that the person who did it was local to me so we met to exchange.. Great guy. It also happens hes a member here.. Small world. Todd10 is his nane here...
Liquid mask??? What is it, where can I get, how's it work? I've been taping & X-acto knifing for years. Apparently I've been living under a rock. Please have pity on me and give me the IN . If it does what the name says, shoot me now. SEVERAL TIMES!
Last post
I use Bob Dively's Liquid Mask. My workflow is like this:
Trim bodies with the X-acto method
Spray on Bob Dively's liquid mask (second half of above video) with $15 Harbor Freight Spray Gun
Use Sk3tch's workflow example to apply art, cut...
I am actually trying to inventory all my stuff and wanted to share. Prob the rarest body(s) I've got and one of my top 3 favs. MAC Mfg 1/12th Ferrari 512M. Not saying that they are not out there, but I 've never seen one before new or used, much...
Dear folk of the forum,
Would you be so good as to give your opinions on this question?
Could I use a Tamiya X1 paint marker to touch up a lexan body?
Just tiny areas really but don't want to melt the shell. I need a black touch-up options, don't...
Last post
That paint is very tame on plastic. you won't have any problems.
OK I have no connection to this company but through friends found a local racer and artist that is offering chassis skins. I contacted him about RC10 skins and he's pulling out an old one he has. I was thinking I'd pass his info in case anyone...
I know this topic has likely been beaten with stick. What are folks doing to reproduce the boxart orange of the original RC10? Pactra Orange is too vibrant and rich. Tamiya Orange is slightly better but still not pale enough. In my searches, many...
Last post
yeah, and now I call every T2 I see a future B1.5 :wink:
You too? :lol: :lol:
Want to find a good dye to make old plastics that were dye back to white, I have found letting them sit in a 1/4 bleach water for a few days helps but it only goes so far.
Last post
Great, thanks.
Too bad there's not a white dye to make older parts look new again.
I'll see what just (near) boiling them does for cleaning up and rejuvenating them.
Has it been discussed on here what Rit dye combinations and available hobby...
HI!... Like the titles says, anyone have a colour pic/scan of this pic/RC10? All I have is black&white pics of the RC10 on the manual. I'd like to do a kinda box art theme on this car that I fully restored. Just need to know the colours. lol!...
I wasn't real sure where to put this, but I figured here would be a good place.
I've found that a good polish for lexan bodies is Arctic Cat Hood & Windshield Cleaner/Polish for snowmobiles. I've cleaned up some pretty good scratches and scuffs...
Last post
I have a pro-painted Customworks Camaro shell that was really scratched up from someone trying to remove some price tags, or discount stickers or something- anyway...Meguires' headlight restorer works wonders with heavy damage as well :D
does anyone know of a good place to buy stencils/sticker's other than ebay,,my son wants to go with a certain theme for his rc10 but i cant find the stencil he wants to paint his body thanks
I am building a kyosho NSR500 (rothmans) from NIB and have spend ubar amounts of time seam sanding painting building etc. I had a look at the decal sheet for the first time out of package and some of the sheet has lifted from the backing. I can...
Last post
Sorry for the huge post. I dont know how to link another page etc>
Hey folks, I'm working on painting some car bodies for my cars and it's just a little chilly out - I'm in Southern California so it's probably pretty easy to wait for a warmer day to do it but I DON'T WANT TO!
Sadly Skull Pile 1 for my team car broke last year :cry: so I'm doing an ambitious remake of the concept this year with a re10 driver to go along with it :mrgreen:
The driver was masked and painted last week in black/white/silver pactra and is...
Last post
Thanks!
Just finished the white pactra and added the vinyl window pinstripes/window nets. Numbers, logos etc will have to wait until Monday.
The vinyl mask worked out great, very clean lines with almost no bleed since I heat guned the mask...
I've been searching around for some RC10 Championship Edition box art photos and all I can find are the photos on the box. I'm wondering if anyone has any idea of how the paint looks on the hood and in the front on the sides???
Just so we are all...
Last post
Got her done! Here is my interpretation of how the hood looks. Good this is that no one knows what's actually there. As for colour, I used Parma paints. For the reddish colour I used fasred with a couple drops of fasblue. For the yellowish colour, I...
There is a lot of canvass here, what custom rigs would be cool? So far I have thought of vanessa's off road racing team, zombie apocalypse van, the a team, and a GM parts direct van.
Last post
I was thinking about doing a rusted out pedo van but I like Shodog's contractor's van. I think a scale ladder from some of those wrestling figures might do the trick.
Well, I've been in decal procurement mode all summer and am just about ready to start my winter project. Still need to figure out what paint/colors I'll use.... I wanted to paint the original body like the box..... But I was thirteen at the time and...
Last post
To be blunt, many of his posts are about advertising his YouTube channel. :roll: I agree that a YouTube embed in a signature is unnecessary, what with all the posted links to share it.
I'm not sure if this was a real paint job but I'm looking for photos of a Red/White/Blue paint job on a Cliff Lett Team car like the one shown in a photo in the Dec 2013 Radio Control Car Action magazine on page 80. I've been searching for a couple...
Ok I know a lot of guys have tried various methods and have come up with very mixed results. Well I wanted to try on a couple worn out bodies I was planning on throwing away.
I tried it on the body from the Rad2 that I just got, and old outrage...
Last post
I love that, leave it alone and the magic will happen. Definitely worth a try
Hey guys so here's the deal - if you were going to buy an entire airbrush setup (brush, compressor etc), what would you get and why?
I'm ready to drop the cash on a FULL setup but I want a good one that will be very versatile (so dual action?) and...
Last post
I only use my shop compressor for airbrushing, regulate the air down to what you need and also use it for what ever else you want to run the rest of the time.
I had desires of rally, but not to sell my Losi ten-scte and buy a Kyosho DRX or other rally car, so I got on e-bay a Proline 14RS body (Proline will not make more :| ).
Many people find it ugly apparently on the forums, but I like it :)
It is...
Last post
yes, it looks a bit like Mistubishi Lancer used the last year Mitsu was on the Dakar :)
Painted this one up a few weeks ago. The more I look at it, the more perfect I think it is.
It's not over the top airbrushed with extensive detailing, etc, but it is by far the nicest vintage looking body I have ever done. Wanted to share in the...
Last post
Gotta say that your lines are super crisp! Is the large 'JRX2' logo painted on aswell? My only criticism is that the body shape towards the rear seems to be lost in the black... but thats probably the effect of the camera?
Users browsing this forum: No registered users and 2 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum