i had a ball stud bust off in 2 spots on my lxts rear bulkhead.. i may want to get a replacement . i heard any bulkhead losi made for rcs before the lxt will work as a replacement.. when i looked at the bottom of my lxt chassis it has 2 more holes for mounting the bulkhead compared to my jrxpro.. is the only true replacement another lxt bulkhead??
You can use any Jrx rear bulk head in Your LXT. The additional holes in LXT, and in Jrx2 ProSE, chassis are different wheelbase options. For truck like LXT use normally LWB option = rear most holes and for buggies like ProSE use normally SWB option = front most holes.
I just won a cheetah telesis 1 kit and i have most parts needed to build this compleatly but i was wondering if any knows if a rear bulk head from an rc10r5 will fit the old rc10l rear?
Thanks
Last post
i have one of these i might put on it at some point. It is on an on road project i built right now though. I also have a nice set of black locking hubs for it and the telesis front end to install as well. I have cleaned up this rear pod and removed...
Has anyone ever created a narrow X2 bulkhead that would allow a long arm Jrx2 build with the LXT front arms? Sort of like the what's old is new RC10 builds that run 10T front arms? I imagine narrowing a graphite chassis plate for it to bolt too? I...
Last post
Looking at the pic of Nitro Hawk that is basically it indeed. I'll get working in a couple weeks. Was used on TRX1 as well, part #TRA2731, I ordered a couple just in case they may even work with a little modification. They are cheap.
I just hit BIN on this set on ebay, I have andy's arms already but have never seen the steering arm or bulkhead brace. Also I note an x on the front of the arm where hinge pin passes through which is not on my otherwise similar appearing andys...
Last post
Lovely, I never saw NIP ones, cool. One came with a car that passed through my life and left all too soon.
Hey how's it going. I've been in the hobby for years but I recently bought rc10t off a guy I work with. So far I've replaced about 90% of the white plastic. I did the front bulkhead front steering blocks rear spindle carriers all the a arms and a...
Last post
Yeah, that guy always has old Associated parts. I've bought tons of stuff from him. Always super fast shipping and he combines shipping on multiple items.
Can i know if i can use the T2's rear bulkhead on a gold pan? Does any of the holes coincides? Or any possibilities or ample space to drill additional holes? Thanks in advance. David Lim
Last post
stock rc10 steering used 8-32.. mip ball bearing steering uses 4-40. s to answer the question you can use the 4-40 screws in the 8-32 holes but you can not use them the other way around.
Here are a couple pics of the Factory Works front bulkhead brace. I do not have a part number as they are not listed on the site. You have to contact Jeff directly to order off menu.
The braces are quite nice in form, fitment, and packaging. The...
Last post
I recently installed the factory works brace with the trinity pins on my jrxt, cross-post for reference:
Hi guys, any one of you tried using the GT rear bulkhead on a gold tub? Does the holes for the screws align or drilling of new holes is necessary?
Last post
Mmmm...i wonder if its that important? Of course you'll feel more secure with the two screws but I have a gold tub which had been drilled for weight lightening and the two part milled off by the previous racer. What do you think?