I just won a cheetah telesis 1 kit and i have most parts needed to build this compleatly but i was wondering if any knows if a rear bulk head from an rc10r5 will fit the old rc10l rear?
Thanks
Last post
i have one of these i might put on it at some point. It is on an on road project i built right now though. I also have a nice set of black locking hubs for it and the telesis front end to install as well. I have cleaned up this rear pod and removed...
Can i know if i can use the T2's rear bulkhead on a gold pan? Does any of the holes coincides? Or any possibilities or ample space to drill additional holes? Thanks in advance. David Lim
Last post
stock rc10 steering used 8-32.. mip ball bearing steering uses 4-40. s to answer the question you can use the 4-40 screws in the 8-32 holes but you can not use them the other way around.
Hey how's it going. I've been in the hobby for years but I recently bought rc10t off a guy I work with. So far I've replaced about 90% of the white plastic. I did the front bulkhead front steering blocks rear spindle carriers all the a arms and a...
Last post
Yeah, that guy always has old Associated parts. I've bought tons of stuff from him. Always super fast shipping and he combines shipping on multiple items.
i got a andy's rear bulkhead a while back here from a trade and i am trying to mount it in a stock chassis with my normal stealth tranny, and the tranny brace does not wanna fit, it just WAYY to tight and if i snug it tight, it actually pullls the...
Last post
does fibre-lyte still like sell parts and such and will they ship to the US?
yes they do and you can't beat those parts, they are absolutely awesome :wink: 8)
Sorry me again. I was offered a RPM rear bulkhead for the RC10 but was just wondering if they have the holes for the wing mount of do you have to use a turret mounted wing? Thanks
Hi guys, any one of you tried using the GT rear bulkhead on a gold tub? Does the holes for the screws align or drilling of new holes is necessary?
Last post
Mmmm...i wonder if its that important? Of course you'll feel more secure with the two screws but I have a gold tub which had been drilled for weight lightening and the two part milled off by the previous racer. What do you think?
i had a ball stud bust off in 2 spots on my lxts rear bulkhead.. i may want to get a replacement . i heard any bulkhead losi made for rcs before the lxt will work as a replacement.. when i looked at the bottom of my lxt chassis it has 2 more holes...
Last post
You can use any Jrx rear bulk head in Your LXT. The additional holes in LXT, and in Jrx2 ProSE, chassis are different wheelbase options. For truck like LXT use normally LWB option = rear most holes and for buggies like ProSE use normally SWB option...
I just finished the design of a 3D printed rear bulkhead for my RC10T. I printed it using carbon fiber infused ABS. The original bulkhead weighted in at 25g, this printed part weighted in at 9g without the brass threaded inserts, 13 with the...