As some of you already know, I’ve own many many Team Associated Buggies and Trucks, and although, I owned a B2 converted into a T3, I’ve never owned an actual T3, until now....
Seeing that Jconcepts re-released the T3 body, I desperately needed a T3 chassis, well, no desperately.
Here’s what I got:
Two for the price of 3.....
Attachments
Life is like a box of chocolate, you never know what R/C car you're gonna get next!!!
Here’s a quick paint job for my runner body, I hope to paint up another one in my racing colors, and some MCI decals as I progress with this....
Gave it a bit of a thrashing before taking these pictures and it was pure joy, although, the 21t motor doesn’t move it as fast as the 5.5T that I had on my other one.
Brushless coming soon
Attachments
Life is like a box of chocolate, you never know what R/C car you're gonna get next!!!
I recently got back into the hobby after a guy at work gave me a mini T. Found an RC10T3 on eBay and got it too. It has a Novak rooster. The original Rooster. The specs I found says it will take a mild modified? Is that like 15t? It has an Epic 27t...
Last post
that's a bright green u used. now just add some cool stripes or flames and enjoy.
I picked up a T3 recently and it has a blue anodized motor plate, front plate and rear plate. Was this a FT version? Can’t remember. It also has blues turnbuckles, full bearings, graphite arms and CVDs.
Last post
Awesome, thanks. Shouldn’t be an issue with that portion sticking out further. Thanks again.
Just got me an RC10T3 in great shape,but requires an ESC and radio. Without breaking the bank, what do you folks recommend? Thanks for the input and by the way, great site. :D
Last post
Well forget my statement of my RC10T3 moving at 20-25 easily. I ran it with my Garmin GPS on it and it registered a whopping 17.9mph. I changed out the gears, motor was replaced with a Trinity Speed Gem 2(blue can). I'll check it tomorrow afternoon...
It looks like there were 3 versions of shocks that came with this truck:
Gold - Basis & Sport Kits
Hard anodized, PTFE coated gray - Team & Factory Team Kits
Blue - RTR Kit
Does anyone know if there are differences in these shocks outside of the...
Last post
I just use a shock shaft with a downstop limiter under the piston and pull it. I'll normally go back with a nut driver or similar tool to make sure it is seated properly.
Hey guys I'm just getting back to Rc's after probably 20+ years. I picked up an old RC10T3 that I'm trying to bring back to life. I'm pretty close I think but when I turn on the controller the truck turns the front wheels all the way to one side and...
Last post
Yea that's the next plan! I already had to steal the motor and the radio receiver from the XTM . When I originally bought it the guy thought he had 2 RC10T3's but actually only one of the RC10's. I got both trucks, chargers, the full suspension for...