Body for RPM Ultra Chassis

[creese]

Hello all!

Just pulled my cars out of storage and am needing a body to fit an RC10 with the RPM Ultra Chassis, such as here:

https://www.rc10talk.com/viewtopic.php?t=584

I do remember that Losi SE buggy bodies fit it, but I can't seem to find any of these. Does anybody know where I might find a body currently in production (or with reasonable stock) to fit this thing?

Thanks!
Colin

[MarkyDents]

Couple of reproductions currently on eBay

[scr8p]

You can use pretty much any RC10 body on it. If you have the RPM Worlds rear tower, then you can go with the Pro SE body.

[RPMfieldtester]

I do remember that Losi SE buggy bodies fit it, but I can't seem to find any of these.

That is what I ran, only bodies that fit the side profile of the chassis properly were the Losi bodies...I did use an RC10 body for a little while with an undertray but didn't like the fit so Losi it was...

[dinglem]

The TOP Models Hybrid bodyshell was specifically made to fit the RPM chassis... but not many about (understatement).


https://www.rc10talk.com/viewtopic.php?f=33&t=43902&p=524080&hilit=top+models+hybrid#p524080

[Chewbacca]

I posted this picture in a different thread. This is the eBay picture from penguin bodies for their JRX Pro SE body. Here actually on the RPM chassis.