So what did you get in the post today ???
-
- Super Member
- Posts: 677
- Joined: Sun Oct 06, 2019 11:33 pm
- Location: Ill-Noise, USA
- Has thanked: 946 times
- Been thanked: 563 times
-
- Super Member
- Posts: 535
- Joined: Sat Apr 04, 2015 6:10 am
- Location: Auckland New Zealand
- Has thanked: 553 times
- Been thanked: 381 times
Re: So what did you get in the post today ???
Well not really in the post but more what did I find helping my mum move house Over the weekend as she put it all your old s##t
Unfortunately the 12l was just the left over part after a graphite chassis conversion back in the day don’t know where the actual car has gone to but the pro panther seems to al be there even if it’s a little messed with at the moment.
And the old aurora afx and tyco magnum 440 slotcars was a surprise to find there still too
Unfortunately the 12l was just the left over part after a graphite chassis conversion back in the day don’t know where the actual car has gone to but the pro panther seems to al be there even if it’s a little messed with at the moment.
And the old aurora afx and tyco magnum 440 slotcars was a surprise to find there still too
- morrisey0
- Super Member
- Posts: 1299
- Joined: Wed Jan 13, 2021 2:45 pm
- Location: Richmond, VA
- Has thanked: 54 times
- Been thanked: 1272 times
Re: So what did you get in the post today ???
This is my second shipment from the MCI/TBG collaboration of combining shipping. I have to say I like what they have done. Save a couple of bucks on shipping, and the combo shows up at the same time, because honestly, one doesn't mean much without the other. Props to them for joining forces!
I build RCs like people would have done back in the '90s ..................................... if they had 3D printers.
- silvertriple
- Super Member
- Posts: 1672
- Joined: Sun May 02, 2021 10:31 am
- Location: France, Isere
- Has thanked: 594 times
- Been thanked: 863 times
Re: So what did you get in the post today ???
A few bodyshells incoming for my in progress projects...
I was expecting two 3D prints deliveries today, but it seems it will be for tomorrow or Thursday rather...
I was expecting two 3D prints deliveries today, but it seems it will be for tomorrow or Thursday rather...
I buy kits to build and ru(i)n them
- juicedcoupe
- Super Member
- Posts: 2990
- Joined: Sun Aug 16, 2020 4:05 pm
- Location: Pascagoula, MS
- Has thanked: 231 times
- Been thanked: 1747 times
Re: So what did you get in the post today ???
Actually yesterday, but whatever. Got a shipment from Frankentruck.
Two Yokomo stocks, a Trinity Slot Machine 2, a Speed Gems 2 Onyx, and a Matrix 7.5.
Also got another Airtronics/AE mini receiver.
The two Yokos are handouts that are still sealed and look to be lightly used.
Two Yokomo stocks, a Trinity Slot Machine 2, a Speed Gems 2 Onyx, and a Matrix 7.5.
Also got another Airtronics/AE mini receiver.
The two Yokos are handouts that are still sealed and look to be lightly used.
Always looking for new and interesting ways to waste money.
- silvertriple
- Super Member
- Posts: 1672
- Joined: Sun May 02, 2021 10:31 am
- Location: France, Isere
- Has thanked: 594 times
- Been thanked: 863 times
Re: So what did you get in the post today ???
The prints I was expecting yesterday arrived today...
First, some white SLS PA12 printed elements for the Samurais
Later on some red SLS PA12 for the Nichimo Spirit FF. It came in a cocoon
First, some white SLS PA12 printed elements for the Samurais
Later on some red SLS PA12 for the Nichimo Spirit FF. It came in a cocoon
I buy kits to build and ru(i)n them
- Frankentruck
- Super Member
- Posts: 2603
- Joined: Fri Feb 19, 2021 9:59 am
- Location: Texas, USA
- Has thanked: 1591 times
- Been thanked: 1775 times
Re: So what did you get in the post today ???
They must have a new employee in the packaging department.
.
.
- Attachments
-
- th(3).jpg (17.24 KiB) Viewed 1091 times
- th(3).jpg (17.24 KiB) Viewed 1091 times
Frankensteined RC10T3 / Franky Jr RC10GT-e (x2) / A+ stamp / Toy Story RC / Graphite replica / B1.5 BFG 5LTi / Clonewald / Hyper Hornet
"I love the effort, but it sure looks like you took the long way around to a tub again"
"I love the effort, but it sure looks like you took the long way around to a tub again"
- limestang
- Approved Member
- Posts: 895
- Joined: Tue Sep 27, 2011 9:48 am
- Location: Fort Worth, TX
- Has thanked: 22 times
- Been thanked: 160 times
Re: So what did you get in the post today ???
Great one - I had a good laugh. Thanks for that!Frankentruck wrote: ↑Wed Apr 13, 2022 11:44 am They must have a new employee in the packaging department.
.
- Limestang
- juicedcoupe
- Super Member
- Posts: 2990
- Joined: Sun Aug 16, 2020 4:05 pm
- Location: Pascagoula, MS
- Has thanked: 231 times
- Been thanked: 1747 times
Re: So what did you get in the post today ???
Got a Duratrax RX-100 (Futaba R-122) receiver and another Powerline motor.
Always looking for new and interesting ways to waste money.
- Incredible_Serious
- Approved Member
- Posts: 3426
- Joined: Tue Jan 29, 2008 12:09 am
- Location: Melbourne, Victoria, Australia
- Has thanked: 1407 times
- Been thanked: 861 times
Re: So what did you get in the post today ???
Found some pretty cheap touring car bodies on eBay, to complete some cars, so snagged them. Same week delivery
Neat bodies too.... nice paint and decal job, light buckets, extra wing and detail parts.... great stuff for the price!
Alex
Lancer Evo will go on something rally, and VW Golf will be installed on a Tamiya FF01 chassis I recently acquired.Neat bodies too.... nice paint and decal job, light buckets, extra wing and detail parts.... great stuff for the price!
Alex
Osiris is the key.
"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken
Look out for Todd K. - he's a convicted serial killer!!!
"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken
Look out for Todd K. - he's a convicted serial killer!!!
- coxbros1
- Super Member
- Posts: 2187
- Joined: Mon Dec 24, 2018 8:50 am
- Location: Energy, Illinois
- Has thanked: 1975 times
- Been thanked: 1756 times
Re: So what did you get in the post today ???
Those are both the "real deal"!
Tap pic for clarity: Derek
- R6cowboy
- Super Member
- Posts: 1088
- Joined: Thu Oct 18, 2018 1:06 pm
- Location: Mendota, IL
- Has thanked: 517 times
- Been thanked: 556 times
Re: So what did you get in the post today ???
Indeed originals. My re-re still hasn't been removed from the box. These two will get restored first though.
-Jerry-
- silvertriple
- Super Member
- Posts: 1672
- Joined: Sun May 02, 2021 10:31 am
- Location: France, Isere
- Has thanked: 594 times
- Been thanked: 863 times
Re: So what did you get in the post today ???
Well, not exactly the postman, as I went to my favorite dealer this morning to fetch some parts I was waiting for too long...
When I arrived, I got a gift. He told me when I went there before Christmas that he have something for me, and he would give it to me next time I would come. It was today.
Here is :
There was no other customers, he offered me a coffee and we had some very nice and long discussions. I showed him my work on the Nichimo, he was impressed. I suspect that next time he gets a car with a broken chassis, he'll ask me if I'm interested
When I arrived, I got a gift. He told me when I went there before Christmas that he have something for me, and he would give it to me next time I would come. It was today.
Here is :
There was no other customers, he offered me a coffee and we had some very nice and long discussions. I showed him my work on the Nichimo, he was impressed. I suspect that next time he gets a car with a broken chassis, he'll ask me if I'm interested
I buy kits to build and ru(i)n them
- R6cowboy
- Super Member
- Posts: 1088
- Joined: Thu Oct 18, 2018 1:06 pm
- Location: Mendota, IL
- Has thanked: 517 times
- Been thanked: 556 times
Re: So what did you get in the post today ???
Factory Team Rc10 B4 shocks and titanium turnbuckles for the on-road T4. Now it can legitimately be considered a T4 FT.
And stumbled across a nice condition Speedworks blueprint 427 empty box. Nice addition to my unused Speedworks blueprint 427 motor.
And stumbled across a nice condition Speedworks blueprint 427 empty box. Nice addition to my unused Speedworks blueprint 427 motor.
-Jerry-
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 7 Replies
- 3217 Views
-
Last post by EvolutionRevolution
-
- 2 Replies
- 700 Views
-
Last post by Dr. Robotnik
-
- 9 Replies
- 1191 Views
-
Last post by Synergy
-
- 3 Replies
- 1535 Views
-
Last post by ireg
-
- 822 Replies
- 30797 Views
-
Last post by Frankentruck
-
- 17 Replies
- 1339 Views
-
Last post by Lowgear
-
- 2 Replies
- 1094 Views
-
Last post by CUDDZILLA
-
- 0 Replies
- 129 Views
-
Last post by gtv1
Who is online
Users browsing this forum: No registered users and 1 guest