Won this on the bay with a decent looking A stamp chassis with some andy's rear arms.Got it all for 30 bucks.The front end looks cool.I haven't seen anything close to looking like except maybe a ds.Can anybody help with an i.d.I'm counting on Scr8p...
Last post
personally, i would just get a standard buggy tower and call yourself done, instead of looking for that mcallister lower shock mount. mainly because your missing the mcallister center shock mount, too. but i'll look through my stuff to see if i have...
I took my ultra molded 10T down to omaha last weekend for its first run in 10 years. 17.5 brushless no boost and shorty pack. It handled pretty good but it would not keep the front end down off of jumps. Where the buggy and short course I could just...
Last post
I might have to play with esc settings. Current suspension is 30 front #2 green, rear 30 #1 started with green, changed to gray. One of the guys suggested add front weight or stiffen up the rear.
I was searching through the forum to see if it was possible to retrofit a B2/B3 front end on an original RC10 but came up short. I found the buggy build that has the original front end on a T2 chassis but I haven't found the reverse. Someone must...
Last post
it can be done if you use all B2/B3 parts except for the nose plate, and make your own noseplate to match up with the gold pan mounting pattern. you will have to get creative with the upper brace mounting to the chassis.
Hey guys & gal, I'm not sure if anyone else has already discovered this and posted it already. If so I appologize but it appears RPM has re-issued the Shorty front bumper for the RC10 (in black only though). I recently stumbled upon them and just...
Last post
I ordered one on the bay, and it came in a bag with a card and a packed by card...
I've noticed that my T4.3 gets a lot of chatter/wheel hop around corners from the front wheels. It's really difficult to drive fast because of it, and makes the thing super inconsistent. I need some help sorting it out.
It's basically a box stock...
Last post
I noticed this with my T5M as well, but there is just alot of slop on the steering unfortunately. It is especially noticeable on the pavement versus the dirt.
I was doing a regular maintnence on my lunchbox when my front left steerings arms ball stud came undone. I ave not been able too find the bottom nut too replace it. What would be the best solution too fixing it?
Last post
thanks alot turbo scorpion, i have whole bunch of jb weld and other fun little mecahnics things like that, i would of never thought of using it, but i still havent found the little nut that i need. but i will definitly try too fix that crack
yes it will bolt right on. i'm not going to use the front on it because i think it will be to wide. i found out what bolink chassis my trinity front end fits on :mrgreen: