b4 wheel conv. with rpm arms need cvd?

[62 bugzilla]

I'm converting a buggy to b4 wheels and I have some rpm arms that I believe are the andy arm length and need to know what cvd to use and outer hub? I think I can use the b44 which is what they use on the klein arms but not sure if the rpm are the same width. I searched around and didn't find my set up. Thanks for the help.

[Charlie don't surf]

If the arms you have are RPM Worlds arms then the Klien arms are a direct copy

[PBR Allstar]

Here's very comprehensive list of the parts needed to do the wide track conversion that I posted on page 13 of the what's old is a lot newer thread.

http://www.rc10talk.com/viewtopic.php?f=35&t=5483&start=180

[Mikeyboy]

You should measure your arms from the hingpin holes and compare to a stock arm set. There are lengths posted somewhere on the forum. If you have the RPM worlds arms, then you can use the b44 cvds and RPM GT hub carriers.

[62 bugzilla]

Thanks alot that what I thought but just wanted to make sure.