Novak 4 and two wires????

[littlescreamers]

I just received my new Novak 4 and receiver. In looking at the esc I noticed 2 wires red in color that come from the same place as the switch. They are bare on the ends and they is a small piece of shrink tubing on one of them. Looks factory to me. I took a pic. no solder marks or anything.

Is this right and what are they for??

Thanks
Scott

[call-911]

The two red wires are only supposed to be making contact with eachother when running 4 cells from what I remember. For 6 & 7 cells, they should be separated.

[littlescreamers]

Ya

I went over to Novak and found what they were for! Leave them alone for 4-6 cells and solder them together for 7+

Glad to see that is still unused and not messed with.

This and some other stuff is going into my roller queen.

Scott

[GJW]

thats a nice 4 mate.

[davidka]

Ya

I went over to Novak and found what they were for! Leave them alone for 4-6 cells and solder them together for 7+

Glad to see that is still unused and not messed with.

This and some other stuff is going into my roller queen.

Scott

Are you sure that's right? I'm pretty sure thats backwards and that connecting the red wires bypasses the BEC for 4 cell use.

BTW, if you need another one I have a NESC-4, an NESC-1x and a TEKIN PX if you need any more speedos.

[littlescreamers]

I am looking for a Novak NES-2H"
High-Powered Servo

And a Novak NEC-1"
Temperature Charger
• Novak's First Charge


The charger is what i used when I was racing in the 80s Sold it with the car!

Scott

[pancar]

Are you sure that's right? I'm pretty sure thats backwards and that connecting the red wires bypasses the BEC for 4 cell use.

+1 on what davidka said.

[GJW]

according to my novak booklet, leave apart until 7-10cells is used.