My Cat Re Build ( Pro Cat) Runner!
- Mad Racer
- Approved Member
- Posts: 972
- Joined: Thu Apr 09, 2009 10:50 pm
- Location: Vintage at Boondal. Australia.
- Been thanked: 1 time
My Cat Re Build ( Pro Cat) Runner!
Well I'm not a Schumacher expert by no means but I have 4 Schumacher's now and slowly getting used to their designs.
I bought this 2nd hand Pro Cat from a my old mate Mario. It's not in bad condition but i wanted a few bling parts and after sourcing some nice Alloy motor plates, center piece for the motor, Shock stay. Camber stay, Upper deck all made by GPM & lastly a slipper clutch with a Wasp belt. ( A big thank you to Alex who sold all these bits to me. )
It's Time to slowly put this Cat back together. So I thought i will take a pic now. A new body set, undertray, belt cover and Pro Cat stickers has just arrived .
The only problem I'm yet to sort out is how to mount the wing. Do I need a different lay shaft for the slipper? Or can I adapt the slipper to the original lay shaft. Any advice would be appreciated.
For electrics i have a new 12t brushless combo, Digital servo, Li Po sadel packs. J.C racing 5 spoke wheels
Cheers
I bought this 2nd hand Pro Cat from a my old mate Mario. It's not in bad condition but i wanted a few bling parts and after sourcing some nice Alloy motor plates, center piece for the motor, Shock stay. Camber stay, Upper deck all made by GPM & lastly a slipper clutch with a Wasp belt. ( A big thank you to Alex who sold all these bits to me. )
It's Time to slowly put this Cat back together. So I thought i will take a pic now. A new body set, undertray, belt cover and Pro Cat stickers has just arrived .
The only problem I'm yet to sort out is how to mount the wing. Do I need a different lay shaft for the slipper? Or can I adapt the slipper to the original lay shaft. Any advice would be appreciated.
For electrics i have a new 12t brushless combo, Digital servo, Li Po sadel packs. J.C racing 5 spoke wheels
Cheers
Vintage . Older is Better !!!!!!! Vintage At Boondal, Australia.
http://www.rctech.net/forum/australian-racing/548133-off-road-vintage-boondal.html
http://www.rctech.net/forum/australian-racing/548133-off-road-vintage-boondal.html
- GoMachV
- Super Member
- Posts: 11337
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 825 times
- Been thanked: 2434 times
Re: My Cat Re Build ( Pro Cat) Runner!
I remember a lot of cars back in the day ran wing mounts off the unused shock mount holes. The mount will sit horizontal not vertical as is the norm.
btw, baaaaaa-ling! That gold looks awesome
btw, baaaaaa-ling! That gold looks awesome
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- GoMachV
- Super Member
- Posts: 11337
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 825 times
- Been thanked: 2434 times
Re: My Cat Re Build ( Pro Cat) Runner!
Like this egress.....
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
Re: My Cat Re Build ( Pro Cat) Runner!
That's going to make a very nice Procat I've been saving up my alloy bits to make a bling CAT too, long way to go though.
- GJW
- Approved Member
- Posts: 2325
- Joined: Mon Oct 15, 2007 7:22 pm
- Location: AUSTRALIA!!
- Been thanked: 1 time
Re: My Cat Re Build ( Pro Cat) Runner!
very very nice mark, cant believe your going to run it nice build manual
- Mad Racer
- Approved Member
- Posts: 972
- Joined: Thu Apr 09, 2009 10:50 pm
- Location: Vintage at Boondal. Australia.
- Been thanked: 1 time
Re: My Cat Re Build ( Pro Cat) Runner!
Thanks guys.
I hate wing wire . This will be run so don't want the hassel that the wing wire, buttons & mounts bring. The egress/ Top Force set up will be my last resort . I have used S/Steel allen screws throughout too.
I have some ideas so i will look into it more.
Thanks for the tips.
I hate wing wire . This will be run so don't want the hassel that the wing wire, buttons & mounts bring. The egress/ Top Force set up will be my last resort . I have used S/Steel allen screws throughout too.
I have some ideas so i will look into it more.
Thanks for the tips.
Vintage . Older is Better !!!!!!! Vintage At Boondal, Australia.
http://www.rctech.net/forum/australian-racing/548133-off-road-vintage-boondal.html
http://www.rctech.net/forum/australian-racing/548133-off-road-vintage-boondal.html
- Mad Racer
- Approved Member
- Posts: 972
- Joined: Thu Apr 09, 2009 10:50 pm
- Location: Vintage at Boondal. Australia.
- Been thanked: 1 time
Re: My Cat Re Build ( Pro Cat) Runner!
Well i sorted out the wing mounts.
I used a set of XX4 wing mounts that bolted up to the alloy shock stay.
Made the front anti roll bar myself as these are hard to find and was pretty easy really.
Painted my new shell & wing.
Just waiting on the new alloy battery post to run li po batteries. Than when i get the ceramic bearing kit i will strip it back down and add the slipper set up .
Can't wait to run it. The only Schumacher's I have used is my Top Cat & Club 10.
Will post more pic's once fully finished.
I used a set of XX4 wing mounts that bolted up to the alloy shock stay.
Made the front anti roll bar myself as these are hard to find and was pretty easy really.
Painted my new shell & wing.
Just waiting on the new alloy battery post to run li po batteries. Than when i get the ceramic bearing kit i will strip it back down and add the slipper set up .
Can't wait to run it. The only Schumacher's I have used is my Top Cat & Club 10.
Will post more pic's once fully finished.
Vintage . Older is Better !!!!!!! Vintage At Boondal, Australia.
http://www.rctech.net/forum/australian-racing/548133-off-road-vintage-boondal.html
http://www.rctech.net/forum/australian-racing/548133-off-road-vintage-boondal.html
- nvxwax
- Approved Member
- Posts: 1071
- Joined: Tue May 25, 2010 8:28 pm
- Location: Front Royal, VA (AKA: Helltown)
- Been thanked: 1 time
Re: My Cat Re Build ( Pro Cat) Runner!
That Cat looks sweet, I would net be able to run a car in that nice of condition lol
Well done!
That looks so nice! Yeah, run it and see what it can do...
http://www.youtube.com/watch?v=PZIkSMEYosQ&feature=youtu.be
http://www.oople.com/forums/showpost.php?p=652218&postcount=593
http://www.youtube.com/watch?v=PZIkSMEYosQ&feature=youtu.be
http://www.oople.com/forums/showpost.php?p=652218&postcount=593
- GJW
- Approved Member
- Posts: 2325
- Joined: Mon Oct 15, 2007 7:22 pm
- Location: AUSTRALIA!!
- Been thanked: 1 time
Re: My Cat Re Build ( Pro Cat) Runner!
wow mark that is one cracking build son! you really went to town alright, excellent paint scheme
those gpm goodie's look the part
those gpm goodie's look the part
- DerbyDan
- Approved Member
- Posts: 1836
- Joined: Tue Sep 08, 2009 8:04 am
- Location: Northampton UK
- Has thanked: 2 times
- Been thanked: 17 times
Re: My Cat Re Build ( Pro Cat) Runner!
Great build - I look forward to hearing how it goes
Just a thought - I think it would look better on black or white wheels - those flourescent yellow wheels (& roll bar ball cups) kinda clash with the gold GPM parts & the yellow on the shell
Just a thought - I think it would look better on black or white wheels - those flourescent yellow wheels (& roll bar ball cups) kinda clash with the gold GPM parts & the yellow on the shell
My T.C Showroom; http://www.tamiyaclub.com/member.asp?id=28990
JC Racing Cat wheels
I agree, that's a great paint job.
It would look wicked with black dish wheels...
It would look wicked with black dish wheels...
- Lonestar
- Approved Member
- Posts: 4270
- Joined: Wed Dec 12, 2007 5:17 am
- Location: Switzerland, yannow, in Europe (or almost)
- Has thanked: 626 times
- Been thanked: 167 times
Re: My Cat Re Build ( Pro Cat) Runner!
I do agree that the fluo touches look weird... Nonetheless the whole finished product looks KILLER. Just as said above, how DARE you run this beauty!!!
Paul
Paul
AE RC10 - Made In The Eighties, Loved By The Ladies.
Blue Was Better - now, Blue Is Bankrupt.
Facebook affiliate program manager: "They go out and find the morons for me".
Life is short. Waste it wisely.
Blue Was Better - now, Blue Is Bankrupt.
Facebook affiliate program manager: "They go out and find the morons for me".
Life is short. Waste it wisely.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5 Replies
- 3141 Views
-
Last post by Mad Racer
-
- 10 Replies
- 2154 Views
-
Last post by kaszal
-
- 4 Replies
- 2356 Views
-
Last post by top cat mike
-
- 8 Replies
- 2978 Views
-
Last post by Eau Rouge
-
- 15 Replies
- 2750 Views
-
Last post by isobarik
-
- 26 Replies
- 3389 Views
-
Last post by Mad Racer
-
- 8 Replies
- 1005 Views
-
Last post by Bormac
-
- 0 Replies
- 1310 Views
-
Last post by Typpo
Who is online
Users browsing this forum: No registered users and 1 guest