I'm pretty sure I've seen this posted somewhere on here before, but how do you put an RC10B4 slipper clutch on a 6 gear transmission? I know I need the B4 top shaft and the V2(?) clutch plates along with the clutch discs and gear.
Is that it or do I need something more? I'm finally tired of my 6 gear transmission crappy clutch arrangement.
Your confusing it with the conversion of a stealth to b4 slipper. As said above, not possible. On a 6 gear that is your diff, not slipper
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas Factory Works website
This thread is nearing completion. At this point I am just editing and correcting any mistakes. If anyone notices anything that should be changed please let me know..... I rebuilt an Associated 6 gear Tranny in the last couple of weeks. After wading...
Last post
Man I never thought this thread would have 7100 views. I thought it would be many more than that. LOL.
Stingerrray
there really isn't much love for the 6 gears. I pry have 50 views on the thread for when I was trying to do some 6 gear repairs...
Hey guys, hope y’all are doing well. Went to a hobby store a few hours away from me and found a decent little haul of NOS parts including an OS Max 12CV in a red OS box with a see through plastic lid. I’ve never seen a box like that so I asked him...
Last post
I wonder if MIP Pucks or Kyosho RB7SS outdrive spacers would work. Custom works lists theirs as in stock.
Which outdrive part number did you end up using?
Thanks for the heads up, I’ll order a couple spare sets! Had to cut mine up to clear the...
I thought that I would refer to the experts on this question. I have a vintage RC10 with the A gold tub. I would like to upgrade to a stealth transmission from the standard transmission. Do any of you know if the 7037 RC10T 4.1...
Last post
Toothpaste I think only worked for people who converted to a steel idler gear. Buy new diff balls and rebuild your 6-gear the Jim Halsey way . You can also try the bearing elimination mod but it's not required for a smooth 6-gear.
I have an original 1984 Associated RC10 buggy with the gold pan frame. I believe it is a series A , how do I verify this? I would like to upgrade the transmission from the original and I believe what I need is a stealth transmission. Is...
Last post
Hello,
I have an original 1984 Associated RC10 buggy with the gold pan frame. I believe it is a series A , how do I verify this? I would like to upgrade the transmission from the original and I believe what I need is a stealth transmission. Is...
I'm sure this has been discussed somewhere - probably more than once, but my quick searching didn't turn up anything definitive. I've got an old 6-gear transmission from an original RC10 Championship Edition. I am wanting to beef it up to handle...
Last post
I was running a completely original 6 gear on dirt oval (and later on a paved oval) using a 13.5 brushless and Lipos, and had no problems to speak of. Conducting general maintenance, I noticed a couple of the idler gear screws would loosen over...
I've searched through a few posts and found a lot of confusing info on what works and what doesnt. I'm a member on RCC and Scale4x4 so I know how to search for things, but am just utterly confused. I saw that in this post: there was a lot of info. I...
Last post
gula for the dynotech arms you need to run a rc10t front kickup and bulkhead. they will replicate the old rpm 'worlds' front end.
not only are the arms too wide for the traditional buggy kickup, but the space on the arms to mount to the bulkhead is...
RogueIV and 48 guests