RC12E WITH NOVAK 610-HRV battery choice!!!

Moderators: scr8p, klavy69

4 posts • Page 1 of 1

bearrocco: Approved Member; Posts: 31; Joined: Wed Jun 13, 2012 7:35 pm; Location: Levittown Pa

RC12E WITH NOVAK 610-HRV battery choice!!!

Quote

Post by bearrocco » Sun Jun 17, 2012 2:48 pm

Hey guys ebay has a venom 8.4volt 3000mh with deans connector. Is that too much for a novak 601-hrv speed control ? I had a tamiya pan car back in the day I used 9.6 v but it had a resistor type speed control.

IT'S OLD AND DIRTY LIKE ME !

durb69: Approved Member; Posts: 384; Joined: Wed Mar 07, 2012 12:55 am; Location: Moravia NY 13118 USA; Been thanked: 5 times

Re: RC12E WITH NOVAK 610-HRV battery choice!!!

Quote

Post by durb69 » Mon Jun 18, 2012 12:07 pm

http://www.teamnovak.com/products/esc/610_hrv/index.html

6-10 cells is what this can handle. that means it can accept 10 cells at 1.2V each for a total of 12.0V max input.

i would say your in the clear with that pack. That thing is going to scream with the extra cell though.

bearrocco: Approved Member; Posts: 31; Joined: Wed Jun 13, 2012 7:35 pm; Location: Levittown Pa

Re: RC12E WITH NOVAK 610-HRV battery choice!!!

Quote

Post by bearrocco » Tue Jun 19, 2012 11:05 am

Thanks I bought the 8.4 let you know how fast it is.

IT'S OLD AND DIRTY LIKE ME !

bearrocco: Approved Member; Posts: 31; Joined: Wed Jun 13, 2012 7:35 pm; Location: Levittown Pa

THANKS FOR ALL THE HELP !!!!!!!!!!!!!!!

Quote

Post by bearrocco » Tue Jun 19, 2012 8:54 pm

Your help got the car close to be running . Front ends fixed , battery on the way 8.4 volt.

on-road forum is truely the best on the site !!!! THANKS VINCE

IT'S OLD AND DIRTY LIKE ME !

Post Reply

4 posts • Page 1 of 1

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Sign in

Similar Topics

Replies

Views

Last post

Novak 610 RV with Lipo

Last post by joel45acp « Sun Dec 26, 2010 7:41 pm
Posted in Vintage Electronics
Replies: 3
by joel45acp » Sun Dec 26, 2010 4:19 pm » in Vintage Electronics

First post

I have a Novak 610 RV in my RC10T3 and was wondering if any of you gents have used Lipo batteries with it. I'm thinking of staying with brushed motors for now, but upgrading to lipos in the 7.4V range with about 3-4K mA. Any info is greatly...

Last post

any particular brand, mA I should look for? Again, thanks for the input gents.

3 Replies

1023 Views

Last post by joel45acp
Sun Dec 26, 2010 7:41 pm
Water Logged Novak 610-RV, can it be saved?

Last post by MONSTER « Sat Jan 24, 2009 9:47 pm
Posted in Modern Electronics
Replies: 31
by MONSTER » Sat Jan 17, 2009 6:52 pm » in Modern Electronics
1

2

3
First post

It came in my recent Treasure Boxes. When I picked it up, water was actually DRIPPING from it. It was FULL. We immediately took the covers off, anddried it out as best we could with a towel, and its been air drying for 3 more days. He said it was...

Last post

ITS ALIIIIVE, ITS ALIVE.....MWAHAHAHAHA, ITS ALIIIIIIIVE!!!!!!!!!

I only tested it in my 10T (FIRST time to drive it also, WOOHOO!!), with a Rx, and S148 Servo, that both also came from my recent Treasure find. They also worked fine.

Now, isnt...
31 Replies

2366 Views

Last post by MONSTER
Sat Jan 24, 2009 9:47 pm
protek rc prodigy 610 quad ac Battery Charger

Last post by guitronics « Sat Apr 17, 2021 1:28 am
Posted in Modern Electronics

by guitronics » Sat Apr 17, 2021 1:28 am » in Modern Electronics

Does anyone have any experience with this Charger? Problems? Advice? Thanks :D

0 Replies

683 Views

Last post by guitronics
Sat Apr 17, 2021 1:28 am
Battery choice !?!

Last post by badhoopty « Thu Dec 31, 2009 1:10 pm
Posted in Modern Electronics
Replies: 23
by Rookie » Sat Dec 26, 2009 1:52 pm » in Modern Electronics
1

2
First post

Ive just came back to RC, The only battery's were 7.2v NiCads, now its Lipo & nimh ??????????? i dont have a clue what to get.

My Cat2000 has a Team Infinity 13 tripple motor & the Cougar has a an old LRP blue Brush motor.

Any help much...

Last post

unless you are racing i dont know why it really matters or why a 9.9v or higher voltage pack wouldnt do ya.

what i like about them (dont have any yet) is that they are completely idiot proof, that being said, i've never had an issue with lipo...
23 Replies

2542 Views

Last post by badhoopty
Thu Dec 31, 2009 1:10 pm
Novak Rooster battery + motor questions.

Last post by K-TOWN-KITT « Fri May 17, 2013 3:55 pm
Posted in Vintage Electronics

by K-TOWN-KITT » Fri May 17, 2013 3:55 pm » in Vintage Electronics

I want to get about 6 Stealth buggies running at the same time. I also want to get them pretty well matched up. The same esc's, same turn motors, and the same battery packs. I have a bunch of Novak Roosters and Super Roosters. All of the following...

0 Replies

1008 Views

Last post by K-TOWN-KITT
Fri May 17, 2013 3:55 pm
Tire Choice

Last post by cbracken « Sat May 09, 2009 6:24 pm
Posted in Temple's RC10 Tech Forum
Replies: 2
by cbracken » Sat May 09, 2009 3:32 pm » in Temple's RC10 Tech Forum

First post

Im looking to buy some tires for my gold tub, i would like a set for the street, as well as the dirt. The dirt i play in is loose gravel on hard dirt, sometimes just loose dirt, so the car is extremely squirrley, very hard to keep straight. Im new...

Last post

Awesome, you huys are the greatest! Hopefully ill be able to help out soon!

2 Replies

526 Views

Last post by cbracken
Sat May 09, 2009 6:24 pm
JR's Choice motor.

Last post by R6cowboy « Thu Sep 01, 2022 2:32 pm
Posted in Vintage Electronics
Replies: 11
by cas22 » Tue Aug 09, 2022 7:12 pm » in Vintage Electronics

First post

Spotted this as part of a Ultima pro rebuild in an auction site here in New Zealand.
Managed to convince the guy to seperate it and sell it to me.
Going into my JRX-Pro build, not that many vintage 20 plus year old Losi parts around in this country,...

Last post

I have a handful of yellow label and white label Losi Revolution motors. One yellow label and one white label motor does not have what I believe to be the correct original endbells, and it's difficult as all heck to find out exactly what endbells...

11 Replies

918 Views

Last post by R6cowboy
Thu Sep 01, 2022 2:32 pm
gearbox grease choice

Last post by BMKTW2 « Fri Nov 29, 2013 7:28 pm
Posted in Traxxas Forum
Replies: 8
by BMKTW2 » Thu Nov 28, 2013 11:48 pm » in Traxxas Forum

First post

Traxxas provides the silicon grease for the nylon gears but I was wondering what grease the delrin on aluminum likes and also how often should you open the gearbox to re grease? Should you fill the case with grease or just light on the gears or any...

Last post

It's always been my understanding that no grease is needed unless there are two or more metal gears. So the delrin/aluminum/nylon combo you're using doesn't need any. I tend to put just a tiny bit of ball diff lube on though. It's gonna happen...

8 Replies

1400 Views

Last post by BMKTW2
Fri Nov 29, 2013 7:28 pm

Return to “Associated On-Road Forum”

Who is online

Users browsing this forum: Mojeek [Bot] and 3 guests

RC12E WITH NOVAK 610-HRV battery choice!!!

RC12E WITH NOVAK 610-HRV battery choice!!!

Re: RC12E WITH NOVAK 610-HRV battery choice!!!

Re: RC12E WITH NOVAK 610-HRV battery choice!!!

THANKS FOR ALL THE HELP !!!!!!!!!!!!!!!

Create an account or sign in to join the discussion

Create an account

Sign in

Who is online

Login Register