Does anyone race with power hd servos? Their specs seem really good for the price. I was looking at a b4s since it runs sxr mode too. Not sure how they hold up though
Last post
I have a PowerHD servo doing steering duties in my Bruiser clone. Does a fine job moving the sticky mudders around, never had a single problem with it. The model number is HD9110MG.
20230413_211242Reduced.jpg 20230413_211210Reduced.jpg
I've been getting Futabab S3305's for my recent builds because I recognize the name from when I raced in the early 90's so I presume they're a quality item (rightly or not). I have HiTec 635MG's in my...
Last post
If going with Savox, apparently there's a big difference between SC-1257 and SH-1257 servos.
.
I just scored an Associated FT RC12L4 and I'm having a hard time finding a steering servo for it that doesn't cost a zillion dollars,can anyone suggest something that'll do the trick without breaking the bank?
Last post
Here's an update on my little 12L4.
Went with a Futaba MC601C ESC,only $49 from Tower,nice and compact,has the ability to be programmed and data logged with a PC and handles down to 9 turn motors on 6 cells.
It fit real nice and runs my Reedy KR...
RC12E.JPG
Need a little help with finding servos for my RC12e, I recently picked up 4 Futaba Fp s-28's only to find they were too big and bottomed out on the chassis. Is there a good size to look for? Maybe 27's or 7's?? The car is from 1979...
Last post
The s28's are a tall servo.Taller than a Standard modern servo size such as a futaba s148. I believe the airtronics 94102 servos will be a much better fit. That's what I have for my 12E but mine has been modified so I can't say for certain.
Anyone brake servos on t4 or b4?? I have a rtr t4 ,plus a b4 and i just broke the servos at the track(yes both).. the built in servo saver seemed loose but is that not enough?? Are people runing mini servo savers on the servo too??(i dont want to...
Last post
thanks guys. i lost hope in servos after my buddy spent like $60 on a race spec servo from china and broke it in 1 run.. looks like the name brands are still the way to go..seems like the off beat deals are always a bad idea
So I'm looking at savox servos and I noticed that I'm seeing servos with the exact same part numbers as those from turnigy. there arent many exact matches but they are all close to each other through the whole line.Can anyone one say whats going on...
Last post
you will find similarities across the savox and the turnigy portfolios in many places...
: these two are not the same - they only share their name.
