I've seen a few cars that are on the original rc10 wheels that have foam tires on them. I'm assuming they're an on road tire. Does anyone know what they're off of and where I can get them?
Last post
I run a set of Bolink foams that I got off Ebay on a blacktop parking lot. Mine have Bolink Racing Tire on the sidewall. The rears are wearing well, but the fronts are eating up pretty quick. If I could find a smooth tennis court, or asphalt...
When I ran 1/12 scale many years ago, our club would collect everyone's used up foam wheels/tires and send them off to TRC (or some such place). Each person had to strip off the old rubber and clean them. They would return ready to install and run....
Last post
In the US try Calandra
Ufra Tyres will sell donuts direct to the customer
Schumacher, Ufra and Gecko donuts available from the UK as our oval classes still glue and true their tyres
I got this bag of 4 foam donuts in with a lot of NIP buggy tires.
There appears to be 2 fronts and 2 rears, all sealed in a single bag. there is no identifying information on the package other than a blue dot on the inside of each tire.
the sizes...
Last post
Option tires for a F1 kit most likely. Not regular 1/12th size.
I have new tires and foam inserts.
One tire is nice and plush with the foam supporting it.
The other tire is flat and the foam doesn't do much. I have to squeeze a bit to get the insides of the tire to touch the foam.
What gives? Is this common?...
Last post
Now that I've had a chance to run it through several packs... tires are working very well, not sure I'll ever fork over the money for a set of official tire inserts now. :idea:
I'm trying to find foam tires for what is said to be a standard Associated wheel size. The place I'm getting the standard wheel size from, is according to the Mini-Mags ad:
A10-Fs fit RC10 and use standard size ASSOC. tires
The wheel...
Last post
I have (2) old Bolink RC10 foam sets that measure 1.7 in diameter. Just the widths and the tire OD's are different.
[
The donuts are cut and trued to match desired width and diameter.
1:10 pan car wheels are generally 1.7 or 2.0 , with widths...
Finally found the right tires for my losI jrxs type r shelfer. They're proline pro-53 foams which have a slightly oversized wheel coupled with a low profile foam tire. These seem fairly hard to find any more so I would like to do whatever I can to...
Last post
Glad I wasn't the only one that heard of the sunscreen method. Hope it works for you mate