I have a RC10GT and I need to get replacement front axle nuts but the manual is not clear on the size I need to get. I can't find them locally so I have to order them, so are they 6-40 or 5-40, the manual shows both as the size.
They are 5-40 but they are nylon nuts. If you are using a metal nut make sure it's not aluminum. It's really best to just stick with nylon. You can use 4-40 nylon nuts from the hardware store
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas Factory Works website
hello ! can i charge this brand new 3600 nimh pack 0224012332 .jpg
with THIS very not brand new kyosho nicd auto peak charger ? 0224012333 .jpg
i have been using it to charge my old nimh packs, and it seems to work fine, but i wasnt very worried....
Last post
I would charge them on something newer just to be sure you don't shorten the life of the cells. The delta peak setting is very important with NiMh cells, it can make or break them.
Does the original 2.25:1 stealth transmission just bolt in the 6-Gear tranny hold pattern on the gold chassis? NO MODIFICATION REQUIRED?
I've got a B stamp Championship Edition with the 6-gear. Dont want to drill the chassis. Looking at buying a...
Last post
That is a really trick mod. Support for those gears will absolutely prolong their life.
Thanks!
A tiny amount of blue thread locker applied to each screw then, using a couple new hex wrenches, twist both screws together very tight so everything...
Just got my ce rc10 in the mail that I won on ebay and have a quick question. I noticed that the dog bones are trying to come out of their sockets sometimes when i pick it up. Could this be a worn out spring or is this just a 'common problem'?
I...
Last post
im running the 3/16 axles conversion AE list on their site.i decided to go with rpm rear bearing carriers since i already had the fronts rpm.
you can only use the special rpm bearings though
as my journey starts for a search for an rc10.. i have ran into a question
im sure we all know that the rc10t2 has the 2.6:1 transmission gear ratio
that means all current transmission parts(t4,b4,sc10) fit.
that being said
can u mount an rc10t2...
Last post
ok
my two cents imperial came from the pre metric UK and is common still to refer to America as imperial :shock: sounds daft but hey that's the Brits for you ,me personally base 10 kinda fits in with me. but as a carpenter iVe worked with guys in...
Hi all, does anyone know what is the diameter of the YR4 diff balls? :?: I would say 3mm, but I'm not sure.. And I don't have any to measure here with me.
Thanks!! :wink:
Last post
Thanks for the info! My diffs, actually my whole car, is still brand new, but as we're probably going to run it, we're trying to gather info for when we do need parts!
Thanks again,
Doug
Has anybody put the posi lock GT2/T4 system on a 10T will it fit ?
Thanks
Last post
His truck is in the f/s section here:
but you have to have access to the b/s/t area to see it. From his description here are a few lines of what it has.
rpm black body mounts
rpm 2.6:1 trans conversion w/t4 shaft and trinity light weight t4...
I'm thinking about buying a BMX, just to knock around the doors on. I'm looking for a new bike but old school style and wondered what choices there are, I have only managed to turn this one up to this point which I do really like.
Last post
2009 isn't old school :lol:
Here's my Mongoose looptail I restored, only cost me a brake set up and a new seat (It now has a viscount seat)
Cool 'Goose, I had a '84 Californian as a kid.
They're definitely not, but the '80s re-re's are still...
Facebook [Bot] and 16 guests