RC10Talk - The Net's Largest Vintage R/C Community

Sounds like AE will have an engine available soon...

Not sure if this does or doesn’t help with the pullstart ideas. This one was setup like this when I picked it up a couple years back.

those look to be the pull start mounts, the non pull start dont have the raised shelf for the engine to bolt to

Not the best photos but here's a pull start engine with non pull mounts. The only negative is that the pullstart hangs down below the chassis. The OS engines have/had big pull starts so something like a Force engine with a smaller pull start wouldn't be nearly as bad.

The header on the other hand would need to be found unless AE brings out a re-re P/S header.

Also, there is no reason you couldn't put spacers under the engine to raise it if the low hanging pullstart is a concern.

Already posted..my bad

GoMachV wrote: ↑Fri Jan 03, 2025 1:06 am those look to be the pull start mounts, the non pull start dont have the raised shelf for the engine to bolt to

Yep. The P/S mounts are "stepped" up to raise the engine, while the non P/S ones are just "flat"...

In fact, there are a few different versions of the non P/S ones ...
...and some of them (seems to be the "early" ones) have an extra "tab" cast onto them, so they physically will not bolt up to an engine with a pull start on it..

I REALLY gotta get un-lazy, and figure out how to put pics on here!

ShelfRacerGT wrote: ↑Fri Jan 03, 2025 8:51 am I REALLY gotta get un-lazy, and figure out how to put pics on here!

The kit appears to come with universals…does that mean 3/16 or 1/4 axles?

3 piece wheels= 1/4"

Love this rere! I'd have to build a Masami style with pink wheel decals and his 89 scheme.

Keep 'em comin AE!

scr8p wrote: ↑Thu Jan 02, 2025 9:04 am

Dangeruss wrote: ↑Thu Jan 02, 2025 1:19 am

Garage Hack wrote: ↑Thu Jan 02, 2025 1:04 am What is the EGT conversion?

https://blog.jconcepts.net/2019/07/inside-look-jconcepts-rc10-egt-racing-truck/

The prototype is better because I built and raced it.

I believe only 30 kits were made and sold. I still have to build mine.

https://www.rc10talk.com/viewtopic.php?t=43125

https://blog.jconcepts.net/2018/12/inside-look-rc10egt-pro-build/


Resized_20210928_210708.jpeg

Ah! That is pretty cool. Thanks for the links and sharing.

Garage Hack wrote: ↑Mon Jan 06, 2025 2:38 pm

scr8p wrote: ↑Thu Jan 02, 2025 9:04 am

Dangeruss wrote: ↑Thu Jan 02, 2025 1:19 am

Garage Hack wrote: ↑Thu Jan 02, 2025 1:04 am What is the EGT conversion?

https://blog.jconcepts.net/2019/07/inside-look-jconcepts-rc10-egt-racing-truck/

The prototype is better because I built and raced it.

I believe only 30 kits were made and sold. I still have to build mine.

https://www.rc10talk.com/viewtopic.php?t=43125

https://blog.jconcepts.net/2018/12/inside-look-rc10egt-pro-build/


Resized_20210928_210708.jpeg

Ah! That is pretty cool. Thanks for the links and sharing.

Just saw this while looking for a chassis protector

https://m.facebook.com/story.php?story_fbid=pfbid022BJrsrw9tMK7g8ykPxqfn8g5ok2tDHd4j5hasqWMcAozK4hKUmmpKB1FqvwWA7yBl&id=61555425271688&mibextid=Nif5oz

You guys thinking of doing box art or something different? I was never really a fan of that dark red or whatever you call it, so I'd probably at least change that color or maybe something different all together.

I bought an Andy’s painted box art a while ago, now I have a use for it. Just because I suck at painting.

Blue looks good as a substitute for red, this is courtesy of Romulus22