Is this RC10 worth the trouble?

[shredderboy]

eBay is a REALLY good source

[SMOKE-DOG]

eBay is a REALLY good source

Very familiar with the Bay.
Yeah I pretty much found everything I needed. Got a nice clean shocktower and some wheels/tires from greazy.
Thanks for the research though.

[shredderboy]

No Problem

[SMOKE-DOG]

Digging through the bargin bin at my LHS I found these wheels for a total of $3. I see that the rears fit but the fronts seem like they need a different size bearing. Anyone know the bearing size?

Now I need some new tires.

[adam lancia]

3/16" x 3/8" for the bearings

[LowClassCC]

3/16" x 3/8" for the bearings

and that would be flanged if i'm not mistaken. flanged is whats on mine anyway.

**EDIT** i was wrong about the flanged bearings see post below.

[scr8p]

the above wheels take plain bearings.

[SMOKE-DOG]

Thanks for the info fellas.

[SMOKE-DOG]

Question.

I decided to use the original RC10 shocks and use the Duratrax ones on a later build. They are in decent shape but one is leaking. I want to rebuild the shocks, will these work with the old shocks?

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX2593&P=M

[Kcal]

That rebuild kit would work as long as the shocks you have load the seals internally, there also a AE tool at like a 1$ that makes removal and insertion of the seals easier.

[markt311]

the shock tool comes with the rebuild kit, I've got about 20

[Kcal]

I only have one