Is this RC10 worth the trouble?
- SMOKE-DOG
- Approved Member
- Posts: 723
- Joined: Wed Jul 23, 2008 1:03 pm
- Location: Columbus, Ohio
- Been thanked: 1 time
Is this RC10 worth the trouble?
I've been into RC since the 80's and have never owned an RC10. Always wanted one, never got one. Now I want to restore one or at least have a nice example to run around for that vintage look and feel. A friend of mine has this one up for trade. He said he used to race it dirt oval and it has some old Andy's bumpers. The buggy isn't too scratched up and nothing seems broken or cracked, besides the battery holder, just a little dirty and the diff feels gritty. The chassis is missing a few stock pieces. Not too sure about the shocks either. I've never owned one so I could use some help. Anything special about this one?
TC showroom: http://tamiyaclub.com/showroom.asp?id=18447
- call-911
- Approved Member
- Posts: 553
- Joined: Thu Mar 27, 2008 12:32 am
- Location: Mokena, IL USA
- Has thanked: 1 time
Re: Is this RC10 worth the trouble?
Trade for what? I would think that would clean up pretty well. You have Losi belcrank steering and Kyosho gold shocks. If you were to part those out alone, would be worth about $50-100 depending on how well they clean up.
Keith C
- SMOKE-DOG
- Approved Member
- Posts: 723
- Joined: Wed Jul 23, 2008 1:03 pm
- Location: Columbus, Ohio
- Been thanked: 1 time
Re: Is this RC10 worth the trouble?
Trade for a new Clod body and some scale truck parts. Stuff In my spares I don't need. It didn't even hit me those were Kyosho shocks.call-911 wrote:Trade for what? I would think that would clean up pretty well. You have Losi belcrank steering and Kyosho gold shocks. If you were to part those out alone, would be worth about $50-100 depending on how well they clean up.
TC showroom: http://tamiyaclub.com/showroom.asp?id=18447
Re: Is this RC10 worth the trouble?
Smoke, looks like a good starter. Somethings are missing; nose brace tubes, wing tubes, and transmission brace. Others are not original if thats what your looking for spur gear looks to be a 48pitch original was a white 38pitch gear, the steering bell cranks were originally white plastic, but the ones on it are an up-grade just need to add some bearings. The front suspension parts that are attached to the shocks at each end are also an up-grade by McKallister. I think the shocks are Kyosho, not completely sure. The McKallister Conversion parts are some what rare and maybe able to trade for the missing parts. Or just run it like it is.
Good luck with the trade.
Good luck with the trade.
- SMOKE-DOG
- Approved Member
- Posts: 723
- Joined: Wed Jul 23, 2008 1:03 pm
- Location: Columbus, Ohio
- Been thanked: 1 time
Re: Is this RC10 worth the trouble?
Thanks for the info. I have an old set of Duratrax shocks that are identical to the Kyosho ones. Had them for 15 years and never had a use for them. These will look right on here. Think I'll go ahead with the trade now.
TC showroom: http://tamiyaclub.com/showroom.asp?id=18447
Re: Is this RC10 worth the trouble?
Wow that is a nice one compaired to what I have seen floating around out there. I havnt been into the old rc10s but for about 6 months or so and man I love them. Also if you need a clod body hit me up man I have one just hangin around. Chevy not 4x4x4. Not neiw but not junk either. I think that if you acually race/play with them then any is worth having and messing with. Now as a shelf queen I couldnt tell you I dont build queens.
You run me in the grass imma run you in the wall, drive like a racer not a flippin idiot
THIS PLACE ROCKS!!!!
THIS PLACE ROCKS!!!!
- PBR Allstar
- Approved Member
- Posts: 805
- Joined: Mon Apr 30, 2007 10:30 pm
- Location: Sonoma, Ca
- Has thanked: 1 time
- Been thanked: 3 times
Re: Is this RC10 worth the trouble?
Smoke, let me know if you want to get rid of the front lowering kit. I have a stock front tower you can have if you want to go that route.
- SMOKE-DOG
- Approved Member
- Posts: 723
- Joined: Wed Jul 23, 2008 1:03 pm
- Location: Columbus, Ohio
- Been thanked: 1 time
Re: Is this RC10 worth the trouble?
I just might do that. I'll PM you when the trade is finalized.PBR Allstar wrote:Smoke, let me know if you want to get rid of the front lowering kit. I have a stock front tower you can have if you want to go that route.
TC showroom: http://tamiyaclub.com/showroom.asp?id=18447
- SMOKE-DOG
- Approved Member
- Posts: 723
- Joined: Wed Jul 23, 2008 1:03 pm
- Location: Columbus, Ohio
- Been thanked: 1 time
Re: Is this RC10 worth the trouble?
Thanks for the offer man, That's why I was trading it away, I couldn't find a Chevy grill for it. And I don't do shelf queens either. That's why their RC and not static models.Bent wrote: Also if you need a clod body hit me up man I have one just hangin around. Chevy not 4x4x4. Not neiw but not junk either. I think that if you acually race/play with them then any is worth having and messing with. Now as a shelf queen I couldnt tell you I dont build queens.
TC showroom: http://tamiyaclub.com/showroom.asp?id=18447
Re: Is this RC10 worth the trouble?
I couldnt agree with you more when you said "That's why their RC and not static models." But if you traded that for a clod body yeah definantly worth it.
You run me in the grass imma run you in the wall, drive like a racer not a flippin idiot
THIS PLACE ROCKS!!!!
THIS PLACE ROCKS!!!!
- SMOKE-DOG
- Approved Member
- Posts: 723
- Joined: Wed Jul 23, 2008 1:03 pm
- Location: Columbus, Ohio
- Been thanked: 1 time
First RC10 vintage runner
It's mine now. Ordered a new body, wing, and gold screws. Cleaned the plastics up a little, will do a more detailed cleaning later, I wanna run this soon. I had some bearings to fit the bellcrank so they went in. When I removed the tranny, I noticed the chassis has an "A" stamped on it. I remember reading something about the letter stamp but can't remember what it means.
Anybody?
Anybody?
TC showroom: http://tamiyaclub.com/showroom.asp?id=18447
Re: Is this RC10 worth the trouble?
Wow, that sure cleaned up nice! Here is a link to give you a bit more info on these: http://www.theshreves.com/rc_stuff/rc10history.htm
Your A tub is probably one of the originals they started making in '84.
Your A tub is probably one of the originals they started making in '84.
Gary
- Group B
- Approved Member
- Posts: 220
- Joined: Fri Dec 05, 2008 5:40 pm
- Location: S.F. East Bay/Tri-Valley
Re: Is this RC10 worth the trouble?
congrats on the find, man, keep us posted with the build!
David
David
Associated: RC10T - "Baller Truck" ~ Red Bull SC10 - "Sucker Free" ~ RC10T - "Teh Shelfer"
lowrydesign celebrates the entire Tecnacraft wheel collection
I celebrate Worlds Chassis and Steering Enhancement Kits
lowrydesign celebrates the entire Tecnacraft wheel collection
I celebrate Worlds Chassis and Steering Enhancement Kits
- shredderboy
- Approved Member
- Posts: 46
- Joined: Tue Dec 30, 2008 10:31 pm
Re: Is this RC10 worth the trouble?
Nose Tubes
http://cgi.ebay.com/VINTAGE-ORIGINAL-RC10-GOLD-PAN-NOSE-TUBES-AE-RC-10-RC_W0QQitemZ170311023910QQihZ007QQcategoryZ34061QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Tranny Brace
http://cgi.ebay.com/VINTAGE-RC10-white-TRANS-BRACE-BODY-MOUNT-BUGGY-RC-10_W0QQitemZ170309033198QQihZ007QQcategoryZ34061QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
or
http://cgi.ebay.com/VINTAGE-RC10-TRANS-BRACE-BODY-MOUNT-BUGGY-RC-10-10T_W0QQitemZ170309449238QQihZ007QQcategoryZ34061QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Antenna Mount
http://cgi.ebay.com/VINTAGE-RC10-ORIGINAL-ANTENNA-HOLDER-ASSOCIATED-RC-10_W0QQitemZ170310844756QQihZ007QQcategoryZ34061QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
or
http://cgi.ebay.com/VINTAGE-RC10-ORIGINAL-ANTENNA-HOLDER-BLACK-RC-10-AE-RC_W0QQitemZ170311040871QQihZ007QQcategoryZ34061QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Gear Cover
http://cgi.ebay.com/VINTAGE-RC10-GEAR-COVER-ASSOCIATED-AE-RC-RC-10_W0QQitemZ110361564033QQihZ001QQcategoryZ34061QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
or
http://cgi.ebay.com/VINTAGE-RC10-GEAR-COVER-LEXAN-ASSOCIATED-AE-RC-RC-10_W0QQitemZ170309621527QQihZ007QQcategoryZ34061QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Front Shocks
http://cgi.ebay.com/VINTAGE-TEAM-ASSOCIATED-RC10-RC-10-1984-SHOCKS-RC-AE_W0QQitemZ370171464757QQihZ024QQcategoryZ34061QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Rear Shocks
http://cgi.ebay.com/VINTAGE-TEAM-ASSOCIATED-RC10-RC-10-1984-SHOCKS-RC-AE_W0QQitemZ370171465544QQihZ024QQcategoryZ34061QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Battery Cups
http://cgi.ebay.com/Associated-Battery-Cups-w-Hardware-2-RC10_W0QQitemZ250381144089QQihZ015QQcategoryZ34056QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.com/VINTAGE-ORIGINAL-RC10-GOLD-PAN-NOSE-TUBES-AE-RC-10-RC_W0QQitemZ170311023910QQihZ007QQcategoryZ34061QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Tranny Brace
http://cgi.ebay.com/VINTAGE-RC10-white-TRANS-BRACE-BODY-MOUNT-BUGGY-RC-10_W0QQitemZ170309033198QQihZ007QQcategoryZ34061QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
or
http://cgi.ebay.com/VINTAGE-RC10-TRANS-BRACE-BODY-MOUNT-BUGGY-RC-10-10T_W0QQitemZ170309449238QQihZ007QQcategoryZ34061QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Antenna Mount
http://cgi.ebay.com/VINTAGE-RC10-ORIGINAL-ANTENNA-HOLDER-ASSOCIATED-RC-10_W0QQitemZ170310844756QQihZ007QQcategoryZ34061QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
or
http://cgi.ebay.com/VINTAGE-RC10-ORIGINAL-ANTENNA-HOLDER-BLACK-RC-10-AE-RC_W0QQitemZ170311040871QQihZ007QQcategoryZ34061QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Gear Cover
http://cgi.ebay.com/VINTAGE-RC10-GEAR-COVER-ASSOCIATED-AE-RC-RC-10_W0QQitemZ110361564033QQihZ001QQcategoryZ34061QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
or
http://cgi.ebay.com/VINTAGE-RC10-GEAR-COVER-LEXAN-ASSOCIATED-AE-RC-RC-10_W0QQitemZ170309621527QQihZ007QQcategoryZ34061QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Front Shocks
http://cgi.ebay.com/VINTAGE-TEAM-ASSOCIATED-RC10-RC-10-1984-SHOCKS-RC-AE_W0QQitemZ370171464757QQihZ024QQcategoryZ34061QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Rear Shocks
http://cgi.ebay.com/VINTAGE-TEAM-ASSOCIATED-RC10-RC-10-1984-SHOCKS-RC-AE_W0QQitemZ370171465544QQihZ024QQcategoryZ34061QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Battery Cups
http://cgi.ebay.com/Associated-Battery-Cups-w-Hardware-2-RC10_W0QQitemZ250381144089QQihZ015QQcategoryZ34056QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
5.5T Brushless B4
[youtube]7dBeNEBtFK8[/youtube]
[youtube]7dBeNEBtFK8[/youtube]
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 14 Replies
- 3976 Views
-
Last post by Jimbo302
-
- 17 Replies
- 1596 Views
-
Last post by surferdave71
-
- 17 Replies
- 799 Views
-
Last post by TRX-1-3
-
- 10 Replies
- 1964 Views
-
Last post by FlyinGN
-
- 4 Replies
- 1759 Views
-
Last post by NeonNoodle
-
- 4 Replies
- 486 Views
-
Last post by jwscab
-
- 8 Replies
- 993 Views
-
Last post by Rustbucket
-
- 5 Replies
- 789 Views
-
Last post by Hanetrain
Who is online
Users browsing this forum: Mojeek [Bot] and 10 guests