Start your engines...
- askbob
- Approved Member
- Posts: 1735
- Joined: Sun Apr 03, 2011 11:24 am
- Location: KY
- Been thanked: 3 times
Start your engines...
I've been thinking about starting this thread for quite awhile since it seems there are a lot of gearheads here, myself included! I love any motor from the classic pushrod V-8 to insane brushless motors. I especially love performance boats and skis. Jetskis are probably some of the most fun I've had in the past few years. I'll post up a vid from a couple of years ago if I can find it. There is no better feeling than doing triple digits on glass.
This Wankel sounds like it's never gonna end. Listen past the brief music.
[youtube]bpxK2ub-qCs[/youtube]
[youtube]1HlkkpDfKsk[/youtube]
[youtube]BHqgpgc-DPo[/youtube]
This Wankel sounds like it's never gonna end. Listen past the brief music.
[youtube]bpxK2ub-qCs[/youtube]
[youtube]1HlkkpDfKsk[/youtube]
[youtube]BHqgpgc-DPo[/youtube]
Re: Start your engines...
I'm a gearhead/speedfreak but going fast on
Water is a whole other game! What kind of boat
Is in that first vid? It's insane.
Water is a whole other game! What kind of boat
Is in that first vid? It's insane.
Re: Start your engines...
That Wankel boat is awesome. Sounds amazing and those waverunners were sweet also.
- scr8p
- Administrator
- Posts: 16524
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 957 times
Re: Start your engines...
if you can't see this vid i'm sorry, i'm new to the whole..... uploading videos to youtube. don't know if i have settings right.
i had this short vid in my phone for about a year now, and for this thread, i figured i'd try to upload it. this is a 68 442 w-30 we built, just firing it up to pull it outside. it doesn't sound bad, but it's better once it warms up and the damper on the left manifold opens up.
[youtube]yC4kMRasGes[/youtube]
i had this short vid in my phone for about a year now, and for this thread, i figured i'd try to upload it. this is a 68 442 w-30 we built, just firing it up to pull it outside. it doesn't sound bad, but it's better once it warms up and the damper on the left manifold opens up.
[youtube]yC4kMRasGes[/youtube]
- askbob
- Approved Member
- Posts: 1735
- Joined: Sun Apr 03, 2011 11:24 am
- Location: KY
- Been thanked: 3 times
Re: Start your engines...
I'm not sure of the boat in the first vid. Unbelievable sound though. This one is pretty amazing too.
[youtube]uBmJ2cuFTcE[/youtube]
[youtube]uBmJ2cuFTcE[/youtube]
- scr8p
- Administrator
- Posts: 16524
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 957 times
Re: Start your engines...
try it again if you wouldn't mind.askbob wrote:scr8p, it says video is private when you click to play.
i'll clean the thread up once it's figured out.
Re: Start your engines...
Nice 442 Olds. I always had a soft spot for a nice Olds or Buick. Lots of power with class.
- THEYTOOKMYTHUMB
- Super Member
- Posts: 6814
- Joined: Wed Oct 22, 2008 5:15 pm
- Location: Evansville, IN
- Has thanked: 2119 times
- Been thanked: 1346 times
Re: Start your engines...
It's workin' now. I remember the time I accidentally uploaded a few of my private videos. PETA wouldn't stop calling me for months... Not to mention trying to explain it to the in-law's.scr8p wrote:try it again if you wouldn't mind.askbob wrote:scr8p, it says video is private when you click to play.
"The world looks so much better through beer goggles: Enjoy today, you never know what tomorrow may bring."
Ken
Ken
- GoMachV
- Super Member
- Posts: 11329
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 821 times
- Been thanked: 2410 times
Re: Start your engines...
Thumbs, were you posting vids of your "heavy petting zoo"? Lol!
Pretty cool scr8p and bob!
My pop is an engine builder so we spend most of the summer babysitting on the weekends. This is one of our sponsored cars
I do the wiring for a good friends drag car, it started as a 99 mustang, then added a blower, then backhalfed it. Then went to a big block and front halved it. Then went turbo. Then twin turbo. Last time it was on the chassis dyno it maxxed out the dynojet at 1500 wheel hp. Not sure what it really made but it was still climbing. Best at Vegas was 7.62@188 iirc. Now he is lightening it-cutting the body and firewall/floor out and going full blown chassis car. Pretty crazy to see this transformation in just the last 6 years when it first went off the street and into a drag car I rewired it from scratch and have a big job re-re-rewiring it again in a few months. Here is the current pic as of a few days ago.
Pretty cool scr8p and bob!
My pop is an engine builder so we spend most of the summer babysitting on the weekends. This is one of our sponsored cars
I do the wiring for a good friends drag car, it started as a 99 mustang, then added a blower, then backhalfed it. Then went to a big block and front halved it. Then went turbo. Then twin turbo. Last time it was on the chassis dyno it maxxed out the dynojet at 1500 wheel hp. Not sure what it really made but it was still climbing. Best at Vegas was 7.62@188 iirc. Now he is lightening it-cutting the body and firewall/floor out and going full blown chassis car. Pretty crazy to see this transformation in just the last 6 years when it first went off the street and into a drag car I rewired it from scratch and have a big job re-re-rewiring it again in a few months. Here is the current pic as of a few days ago.
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- scr8p
- Administrator
- Posts: 16524
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 957 times
- askbob
- Approved Member
- Posts: 1735
- Joined: Sun Apr 03, 2011 11:24 am
- Location: KY
- Been thanked: 3 times
Re: Start your engines...
That Olds vid is workin' now! Sweet car!
Gomachv, do you have any video of that Mustang? Love the modiified too, can't get enough!
Gomachv, do you have any video of that Mustang? Love the modiified too, can't get enough!
- THEYTOOKMYTHUMB
- Super Member
- Posts: 6814
- Joined: Wed Oct 22, 2008 5:15 pm
- Location: Evansville, IN
- Has thanked: 2119 times
- Been thanked: 1346 times
Re: Start your engines...
Let's just say... my dog ain't named Peanut Butter just because he's brown...gomachv wrote:Thumbs, were you posting vids of your "heavy petting zoo"? Lol!
Totally kidding!(his name is Buster) and I won't post here again and corrupt this wonderful thread! Sorry!
"The world looks so much better through beer goggles: Enjoy today, you never know what tomorrow may bring."
Ken
Ken
- GoMachV
- Super Member
- Posts: 11329
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 821 times
- Been thanked: 2410 times
Re: Start your engines...
This was the dyno pull, hope the vid works
http://youtu.be/jqL1bqNv1qE
[youtube]jqL1bqNv1qE[/youtube]
And the parachute cam
http://youtu.be/gmdbWCv0AtA
[youtube]gmdbWCv0AtA[/youtube]
7.66@180 is the best run I could find a video of, this was with the single turbo. In qualifying your just racing the tree so he tends to leave a little late.
http://youtu.be/sBmcInuYwbA
[youtube]sBmcInuYwbA[/youtube]
http://youtu.be/jqL1bqNv1qE
[youtube]jqL1bqNv1qE[/youtube]
And the parachute cam
http://youtu.be/gmdbWCv0AtA
[youtube]gmdbWCv0AtA[/youtube]
7.66@180 is the best run I could find a video of, this was with the single turbo. In qualifying your just racing the tree so he tends to leave a little late.
http://youtu.be/sBmcInuYwbA
[youtube]sBmcInuYwbA[/youtube]
Last edited by klavy69 on Tue Jan 01, 2013 2:13 am, edited 1 time in total.
Reason: fixed youtube links
Reason: fixed youtube links
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- GoMachV
- Super Member
- Posts: 11329
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 821 times
- Been thanked: 2410 times
Re: Start your engines...
Haha it's all good I love the comic reliefTHEYTOOKMYTHUMB wrote:Let's just say... my dog ain't named Peanut Butter just because he's brown...gomachv wrote:Thumbs, were you posting vids of your "heavy petting zoo"? Lol!
Totally kidding!(his name is Buster) and I won't post here again and corrupt this wonderful thread! Sorry!
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 7 Replies
- 255 Views
-
Last post by coxbros1
-
- 2 Replies
- 470 Views
-
Last post by marlo
-
- 9 Replies
- 1124 Views
-
Last post by Puffdogg
-
- 2 Replies
- 693 Views
-
Last post by jwscab
-
- 4 Replies
- 1248 Views
-
Last post by klavy69
-
- 6 Replies
- 1538 Views
-
Last post by RC10th
-
- 1 Replies
- 856 Views
-
Last post by Mr. ED
-
- 1 Replies
- 1116 Views
-
Last post by Eau Rouge
Who is online
Users browsing this forum: Amazon [Bot], DotNetDotCom.org [Bot] and 19 guests