RichieRich's 30th Anniversary RC10 Classic Limited Release

[RichieRich]

Well, here it is. I've added bearings and the bellcrank steering. I'd like to add some vintage-looking turnbuckles. I painted it Pactra Firey Orange Metallic. It looks sorta boxart, but I wanted to make it stand out a little but still look vintage-y.

[SnoopMaxx]

Very nice
Definitely stands out with the Firey orange

[badhoopty]

i like the color. alot.

i just never get tired of looking at rc10's. kinda like women... just fun to look at.

[mikea96]

I agree this looks great!

[romulus22]

i like the color. alot.

i just never get tired of looking at rc10's. kinda like women... just fun to look at.

And play with

[Lonestar]

Nice car and nice shots.

I can't believe peeps dissed the protech when it came out... This and the Manx are THE classic buggy bodies

[JK Racing]

I'd like to add some vintage-looking turnbuckles.

I used a couple different sets of these (they come in different sizes), very vintage looking

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJH78&P=7

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJH79&P=7

[romulus22]

Nice car and nice shots.

I can't believe peeps dissed the protech when it came out... This and the Manx are THE classic buggy bodies

It's by far my favorite buggy body of all time.

[RichieRich]

Are these the sizes you used, Joey? Do they fit in the stock ball cups? Oh, and I agree, the Protech is awesome.

I used a couple different sets of these (they come in different sizes), very vintage looking

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJH78&P=7

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJH79&P=7

[JK Racing]

I built my car with CE length tie rods (so these may be too long, but have plenty of thread to cut them down). They were a little tight on the stock ball cups, I put a dot of stealth lube to help them along

Hobby People usually has these on the wall, you can go in with your current all-thread and measure up if needed.

[JPAE07]

Beautiful car! I like the twist on the color you used.

[RichieRich]

Thanks! It's funny, I really had the intention of only adding bearings. Then I saw the ball bearing steering and thought, "I need that". Then the turnbuckles were such a pain to build, then there's that fine adjustment once the car has all the electronics and it's nearly impossible to tune the threaded rod like you can with turnbuckles. So, let's see if I can stick only only adding the turnbuckles.

[Charlie don't surf]

Nice car and nice shots.

I can't believe peeps dissed the protech when it came out... This and the Manx are THE classic buggy bodies

I'm guessing it was very unrealistic when compared to the SRB's and such. Solid front window, roll cage...

wait, this almost sounds like the current complaints about the cab-forward shells


Looks really nice!

[RichieRich]

I just added the Lunsford retro turnbuckle set. Very nice. I think I'm done with mods. Now to focus on getting some electronics installed.

[flipwils11]

Can you add some pics in sunlight or different lighting? Looks very nice but would like to see some more angles.