You did a really good job on it.
I don't think the pic is high enough quality to print off of it. Guy I'm talking to says they need to be really good.
I have been talking to Shawn on here and will be trying to get a Cliff Lett replica of my own, fingers crossed!
Was their any ae adds in the magazine?
Been working on this for awhile but found a guy who is a graphic artist guy and sent him the ads from a 80's car action and he was able to tweak them and they came out awesome. Soon as he gets them ready I will update where to buy.
1. This Mod requires x4 4/40 x ¾” screws, and x1 extra #6334 battery box and leaving behind the stock x4 4/40 x ½” screws for other projects.
2. Disassembly of the rear #7353 shock strut, and #6325 transmission plate are the minimum disassembly...
Last post
130x400? i wonder if that changed with one of the latest updates? i could've swore it was like 130x130 or something like that.
Yes, it's kind of a weird set up, but I think it's always been like that. I guess the people that created the format for...
I'm thinking about purchasing a Serpent F110 (1/10th scale F1) kit. I'm not too familiar with Serpent quality as the last Serpent car I drove was ~15 yrs ago. Can anyone tell me if Serpent still builds a quality product as the price tag is premium...
Last post
the 977 does happen to be tq at the WC for the moment, however, I must say ;)
Hey I've noticed that my resized pictures just don't have the clarity I would like. Does anyone have a suggestion as to how to improve them? I am taking them at a fairly high resolution and they show every speck at full size.
Thanks!
Last post
Does your camera have a macro setting if so use it for close ups? Just a suggestion.
Hello folks, I am getting back into the hobby and would like to get some of my older cars and trucks working again. I would like to build my own packs but don't know who makes a quality sub c cell anymore ( does anyone?)
I got my Re-Re in the mail yesterday and I am super excited. I am going to build it and shelf it next to my Cadillac. Anyway, I was looking over the chassis and it seems a bit... off. I have a few pictures. Should there be the ridges and...
Last post
I find it very hard to believe that the re-re is of a lesser grade than the original. Should all be top notch stuff :wink:
I've read enough reports to make me feel that there were some substantial quality control issues. How about the top shaft...
Just throwing this out there to see if anyone else on the board has run one of these trucks.My local hobby shop recently had a sale on the Strike as a roller and my Brother was looking at getting back into RC after a 7 or so year absence.I recomened...
Last post
Word is the Strike is on the way out and is going to be replaced this year with something better. Horizon has seen that it isn't a very good product and are working on something better. They know it can't compete with the sc10.