If you find RC10Talk to be an invaluable resource, please help contribute by making a donation. All donations received go back into keeping the site operational. This ensures we will be able to continue going and growing!
I hope everyone is having a very merry Christmas or if your not Christian I really hope your having a nice few days off and seeing friends and being merry anyway .
Love to all
Gav
Last post
Merry Christmas to all, and to all a good night! :D
I sent you a PM a couple of days ago but it’s stuck in my outbox, I wonder if your inbox is full?
Thank you.
Last post
aip47-2008 is a great guy! We raced together regularly about 30 years ago at the same tracks. However, he was an avid 4wd racer and I raced just 2wd. The fun memories!
I only recently got back into RC cars, but throughout the years/decades have always kept at least one Tamiya tool in my box. They tend to fit a lot of things and it is much easier to use than a wrench or pliers. They are a perfect fit for many...
Last post
I still have multiple Tamiya wrenches in my toolbox. They are just so handy
To the forum: Does anyone remember the member who purchased a bunch of Sassy Chassis stuff from his neighbor or someone he knew? I'd like to get in touch with him an see if he still has any of the chassis's he might want to sell. It was a fairly...
Just in case you're like me and wonder what the inside of your home sub looks like. This is a Paradigm PS-1000. Blew a ring so I bought a repair kit. Pics are in reverse order from what I meant for them to be... :roll:
Last post
Remember the pull-out decks??! :lol: I remember guys bringing their whole deck in and putting it in their locker! :lol: I can still hear the joke I see you pulled your deck out. :? :lol:
Yes! I remember the pull-out decks - you could knock...
Hey guys! For those of you not on Facebook, I figured I should fill you in. We put in an offer on a place and it was accepted so we are packing up and headed to Idaho. Factory Works will be up and down for a while as we try to get our house sold...
Last post
Don't Coors full flavor across state lines....you'll get busted!
Got the blu ray and watched it last night and I'm curious if any of our membership here has seen it.
I thought I knew the story but was surprised by some plot twists. Perhaps the film-makers have taken some artistic license in an effort to make a...
Last post
I finally watched it last month. Being a life long gearhead/car guy, I have to admit I was not looking fwd to Matt Damon playing Carol Shelby, just seemed like a really poor choice to play Carol. But I can admit when I am wrong, and thankfully, I...
I have a really stupid question. I've searched the internet and came up with nothing. Probably because I myself don't even know how to ask what I want to ask.
Is there a formula or something used when figuring dimensions on a resized part ?
I...
Last post
if you want to use 1/8 standard wheels then you will want to use a standard 1/8th hex drive ( don't know what that is ) not the Tamiya style drive flange
I believe the answer to that question would be either 14mm hex or 17mm, with 17mm being far...
Heading to Idaho- hopefully permanently. We are headed out next week to poke around and see what areas we like. Any hobby shops that I need to visit on the way through? We will be southern, basically from Oregon down to Boise, over to Pocatello, and...
Last post
Been there, the owners had just bought the place. Really cool people!
Quite honestly I’m just done with Oregon. The wife would make more money due to lower taxes, and with her job being transitioned to remote anyway it just makes sense. Since I work from home it doesn’t matter where I’m located. We could easily sell...
Last post
hmm, seems like a win win to me but then again we're not a close knit family on my side...the other side is another story :roll:
Hey guys. It's been a while! I am still alive and well, just needed a break from RC cars due to other priorities. I started autocrossing my '55 bug and have been really focused on it, plus family, camping, off-roading... You know how it goes!
I've been watching this series on a new streaming service called Peacock. I'm 7 episodes in and it's pretty interesting.
MaTP1NUyR_o
I grew up in central Illinois and surrounded by dirt tracks; The Springfield Mile, Shaheen's speedway, Macon...
Last post
May I introduce people to the following two concepts:
- Urbex ( urban exploration ) - the act of (often illegally) visiting long closed-down buildings and other places. Many urban explorers take pictures and keep blogs on the web anonymously.
-...
For those of you not on FB, I'm going to be taping an episode of the RIP podcast tonight with Jason and Gotti Jr. If there are any questions you'd like to hear them ask, post them up here and I'll pass them along. Should be fun. :)
Last post
Hi,
I had it playing in the background while I was working. very enjoyable!
One of the issues with reproduction bodies, as we all know, is that many of them are produced by making a mold of an original, which in the end produces a smaller copy of the original. Has anyone considered making a body mold using 3d printing? As...
Last post
I don't know exactly what the pros use, but here's my materials experience in vacuum forming...
Thermo/vacuum forming requires a rigid, tough material with a low coefficient of thermal expansion, as well as the ability to withstand cyclical 400F+...
There's a ton of bored people stuck at home , what's your plan to survive the boredom ?
I cut the grass and I've been running a few cars in the garden , so far the Rough Rider project I'm working on and my Mini Mustang have been out today , found a...
Last post
Got bored so i designed a working Balista
Its now on Thingiverse
So if you need to wage war in the living room or the latest in Roman concealed carry X ray proof weaponry then you're in luck, have fun. :D
This is something I've talked about doing for years. Just never had the motivation or space to do it.
Starting off with a pretty solid '85 chevette with a killer 60 hp and 3 spd auto.
I got the car for pretty cheap and was just going to...
Last post
The truck was consistently the fastest car in my class all night. I had a couple friends as spotters giving me a heads up on the cars I raced if I had to worry about the tree or not. I knew my only chance to beat the truck was to cut as close to a...
I would like to personally thank all who donated this month even with this virus BS going on and hardships some people are having at the moment.
This place is great......................
Last post
That's what I initially thought would be the best course of action. I figured it might be simple enough but after researching the heck out of it to see if it was possible, it isn't. You can't combine two different databases as there are way too many...
....mothers, sisters, daughters, or maybe yourself? :? :wink:
A shameless plug here for my wife.... she became a stylist for Color Street. It's a company that designed 100% nail polish strips. She got kind of addicted to them, and decided to make...
Last post
She got kind of addicted to them
Story of my life!!! Oh, I mean story of my Wife :lol: :lol:
My wife did as well - it passed - back to semi-commercial embroidery - its in it passing stage again, but Scentsy is still costing me, I mean going...
These are strange times indeed but I hope everyone is staying safe and doing well.
Hope abounds, we will make it through the pandemic and normal life will return again one day.
I’ve been searching and searching with no luck finding the picture I’m looking for. I was about to start buying some old magazines on eBay but at $9.99-$15.00 a pop plus shipping that’s an expensive gamble.
I’m looking for the full page...
Last post
If you look at the picture on a phone and hold your arm out it kinda looks burgundy.
Guys after six months of breaking tools, programming and reprogramming, I finally have something to show for all the work I have done. I initially tried this way back in June but ran into major problems. The new machine is making things easier but I...
One of my other main interests in life are aquariums. I've been a big fish keeper for a number of years now and one thing that I have always wanted to do is build a paludarium. For those that don't know what that is, its an aquarium/tank but it has...
Last post
Turned out sweet. Not exactly the same, but my daughter has a Crested Gecko. It's very friendly.
Just wondering what people think is the best cold air intake and if any noticeable gains?
Last post
Cold air intakes best gains are in the looks department. Like others have said. Unless other things have been modified the stock air box breathes as good as the stock engine needs. I’ve seen plenty of people test the theory on a dyno and the gains...
Is there any fix for this?
It´s shame that almost 1/2 of the pictures in the older threads are gone.
Last post
This is true but at least we're in control of them instead of relying on third parties. The monthly hosting bill will eventually increase as a result but it will regardless. Allowing attachments just reaches that point sooner.
Well just got home from VA Hospital from haven my 14th attack.Barely get around mainly staying at home.I had a heart attack at salvation army then had two more at home.House so high off ground they made me walk to ambulance,i think they just didn't...
Last post
Happy Birthday!! Hopefully the new year has been giving you some breaks?
So I thought I'd share my precious go kart project with you guys. More info can be found at the DIY Go Karts forum here:
I got this thing off Craigslist for $60 on New Year's Day this year, not really knowing much about go karts, and so with what...
Last post
Yes, the relative positions of the gaps.
When I upgraded to the Raptor connecting rod, it slipped my mind that the 120 degree rule also applied to the 3 piece oil ring. So the two rail rings ended up lined up, allowing blow by and oil leakage. I...
So here in Texas, the government is ridiculous with vehicle laws. I mean, in Idaho, you can register your ATV and drive it everywhere except a federal highway.
Here in Texas, you can't even make a motor assisted bicycle without needing a moped...
Last post
HAHAHAH! :lol:
But I swear, officer, it's under 40cc!! :mrgreen:
:lol: :lol:
Any of you guys fellow aquarist / fish keepers at all? I've been into fish keeping on and off for a very long time but got back into it very deeply again about 8 years ago. I keep mostly cichlids but a couple years ago got into polypterus bichirs...
Last post
I used to love keeping aquariums. Up until about a month ago, I've had at least one aquarium since I was a kid. I just don't have the motivation to make time to properly care for one now. Maybe again in the future. Your setups look very nice. Well...
I am curious to know if anyone else has found good deals out there on Cyber Monday.
I found a couple of interest to me.
AE 20% off any items not listed as MAP. Free shipping is now $100 not $50, but no tax, at least not to Texas.
Amain 15% off...
Thoughts on using ultrasonic cleaners for rc parts? If you have, what products did you use? Is it safe for the plastics? Any suggestions/ experiences would be appreciated. Thanks!
Last post
I use them daily at work, hot heat setting with the proper cleaning fluid for what you are cleaning.
We use one part Mr Clean to 3-4 parts water to clean anything. You could use Simple Green in the same formula for RC parts.
4 HOURS NORTH OF NC IN VA. I RAN INTO COOTER HIMSELF AKA BEN JONES. WE TALKED FOR A LONG TIME. TURNS OUT COOTER IS FULL OF LAUGHS AND A GOOD OL BOY TRUE TO HEART. WAS IN DESERT STORM ALSO BUT HE WAS IN POLITICAL CIRCLE THEN. HE HAS ALSO WORKED WITH...
This may just be a UK problem , traveling caravan scum who arrive in packs , park up on any field that's possible to break into , steal everything that's not nailed down , get served with an eviction notice and stay until the last moment before...
Last post
These people are not thought of as homeless , I have real sympathy for people who have slipped through the cracks in the system and become lost and homeless, they need our help , these people have wads of cash ,brand new vans and very modern top of...
Hey!
I was told about kneeling chairs that they are much convenient and even make you more productive at work. I’ve never used it before. Any thoughts? Do they worth it? Do they help to avoid back pain? Where to buy such a chair?
Well, I’d like to...
Last post
I'm sure they work to some extent depending on your back issue. When I walk around the offices here I also see people who keep Yoga balls in their departments for people to sit on to give them a break from their chair. I'm not sure what the benefit...
HER BOYFRIEND WOKE GO TO WORK 430 AM AN SHE WOULRNT RESPOND AT ALL WE DID EVERYTHING BUT DIED IN ROUTE TO HOSPITAL.SHE WAS 23 YRS OLD.CASE STILL BEING INVESTIHATED.SHES NOW SITTING ON MY DRESSER IN A SWEET LOOKING HUGE JEWETRY BOX.STILL HARD TO...
Users browsing this forum: Google [Bot], Halgar and 3 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
Google [Bot], 
Halgar and 3 guests