Doh! What is the overall length? Might be able to find someone with a single in their old pit box
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas Factory Works website
I have a single I was going to use for the steering servo so I replaced it. Now either I need another for steering or have to use something mismatched.
You are more than welcome Jason.
It was really GoMachV that said " Might be able to find someone with a single in their old pit box" when I thought hmmm.
Looked in the same place that it had been sitting for 30 years and there it was. The only technacraft turnbuckle I had.
Glad to help!
Hey guys. I'm not a technacraft expert so I have a few questions. I got a partial set from a recent find...just fronts. They seem to have a different thread pitch than the Lunsfords or stock turnbuckles that I'm used to. Does anyone know what it is?...
Last post
Late model Associated blue titanium and Lunsford Punishers are all 3mm left and right-handed threads that self-tap into any standard ball cup. Original RC10 threaded linkage was 4-40 threaded rod. Losi turnbuckles were all 4-40 threads. Thorp,...
I have an old technacraft rear pod, and after posting in the RC10L porn thread about the rear diffuser, I am curious if this pod ever had a diffuser. I believe it to be for an RC12L, although it may be for an RC10L SS? If anyone has some info or...
Last post
Thanks, I guess I have to fab one, but thanks for the help and insight, I will post once the car is completed.
Just found out that I have some. Been looking on ebay for parts for my buggy and stumbled across one and it had the same ones I have. Is there another company that makes titanium ones? I ask because I only have them up front. the ones that were out...
Last post
Yeah Technacraft tie rods are uber rare, I haven't seen one in years actually. However, Tecnacraft ones are a bit more common... :roll:
Hi bros, can any one advise me on the length of the tie rods for front the wide A Arms. I'm making my own out of stainless steel rods. I need the measurement of the rods for the steering links and front damper stay to the C hubs. Thanks. David
Last post
here's the lengths to do all of the rods:
center link - 1
steering rod - 2.06
fr. camber rod - 1.65
r. camber rod - 1.25
I don't know if anyone else has this problem but when people post links (especially those long eBay links) it makes the window so wide that I'm always scrolling over to read the messages. This isn't a big deal but it's a pain.