Andy's onroad prototype chassis

[hugger19]

well now iam done done! mounted up a motor and shocks. found the shocks off ebay they are yeah racing shock gear 55mm touring car. i used longer but light weight springs in the back, and than used the ones that came in the kit in the front. the fronts were a bit of a pain to mount, but they are done with no binding. i think they would have been easier if i were useing a raborn chassis and arms.

[hugger19]

ok well i put this on ebay for a week and than i found this build on here......... https://www.rc10talk.com/viewtopic.php?f=33&t=38218&p=434240&hilit=Raborn#p434240
after seeing this truck i fell in love with it sweet build LTO_DAVE!!!! Well it lite a fire in me so i changed my mind and started again on this chassis (again drilled no holes) and came out with this! made the top brace, proline rc10 truck conversion rear body mount and added wheels/tires, they are used and lil cracked and worn body is on order.

IMG_8020.jpg (22.52 KiB) Viewed 328 times

IMG_8020.jpg (22.52 KiB) Viewed 328 times

IMG_8021.jpg (24.08 KiB) Viewed 328 times

IMG_8021.jpg (24.08 KiB) Viewed 328 times

IMG_8022.jpg (22.55 KiB) Viewed 328 times

IMG_8022.jpg (22.55 KiB) Viewed 328 times

IMG_8023.jpg (20.39 KiB) Viewed 328 times

IMG_8023.jpg (20.39 KiB) Viewed 328 times

[hugger19]

well its done!!

IMG_8043.jpg (17.3 KiB) Viewed 305 times

IMG_8043.jpg (17.3 KiB) Viewed 305 times

IMG_8044.jpg (22.78 KiB) Viewed 305 times

IMG_8044.jpg (22.78 KiB) Viewed 305 times

IMG_8045.jpg (19.73 KiB) Viewed 305 times

IMG_8045.jpg (19.73 KiB) Viewed 305 times

IMG_8046.jpg (20.08 KiB) Viewed 305 times

IMG_8046.jpg (20.08 KiB) Viewed 305 times

IMG_8048.jpg (22.46 KiB) Viewed 305 times

IMG_8048.jpg (22.46 KiB) Viewed 305 times

IMG_8049.jpg (23.23 KiB) Viewed 305 times

IMG_8049.jpg (23.23 KiB) Viewed 305 times

IMG_8050.jpg (24.42 KiB) Viewed 305 times

IMG_8050.jpg (24.42 KiB) Viewed 305 times