I've had this about eleven years now. This is the Pro hand wound version of the Spec 19 motor. These Quad Mag motors are really smooth to turn over by hand.
One interesting thing of note is that the Pro sticker has been placed over the Spec sticker. You can just see the Spec sticker peeking out from underneath in this photo.
Hi
I have a reedy quad spec 19t in a b4. the comm is in a terrible state after about twenty minutes running. i have standard wheels and a 23t pinion on an 81t spur. the battery is a 2 cell 5000mah and the esc is an lrp ipc v6.
I have attached a...
Last post
I prefer to use a com cleaner stick as opposed to a qtip. Like this...
I was snooping around looking for pics and more info on the 1992 Reedy Race, specifically Rick Vehlow's Traxxas TRX-1 . Every once in awhile someone will ask about the TRX-2. There never was a TRX-2. But after coming across this photo contained in a...
Last post
Yeah, I hadn't noticed the body difference. That thing looks way better than the kit. Both TRX-1 and TRX-3. And I also had no idea that Furatani went to the darkside for a minute.
I put a Turnigy 2C 4200mAh shorty lipo in the Raider today after a little encouragement from my Dremel. Wow, what a difference from a 25 year old NiCd! It was actually pretty quick (as was the Ultima with same battery when the diff was working). It...
Last post
I agree the numbers are confusing and don't tell the whole story, RPM isn't the best way to measure the actual power of a motor. I do know that I replaced a 23t brushed motor with a 17.5 brushless, and the power was similar. 10.5t may be stretching...
I have a reedy tri sonic motor. Red can with a B sticker on it. I took it apart and there is a 41 written on the armature. Does anyone have any info on this? Also is it possible to short a motor? I was bashing last week and my capacitor that goes...
Last post
Installed new capacitors. Maybe I will try another set. The fizzled motor is on my b4. The reedy motor I bought years ago and was running it in a ayk radiant with truck tires. So wrong application all the way around. I remember I brought the car...
I just swapped my Reedy M3 17.5 in my B6 for the Reedy S Plus 17.5. I have been delaying this because I was thinking a 17.5 is a 17.5, mine is still in great condition and I'm not going to spend a hundred bucks just to have the latest thing. Well, I...
This is my oldest motor I have at home. I bought this when we were on a travel through the UK and wanted attend a 1/12th race. Don´t remember exactly but must have been around 1980 I think. Maybe someone knows eaxactly when this motor was released....
I am new to this forum but started my RC life with RC12E.
I am interested to know what is the welding technolgy that Reedy used in his can type Igarishi Reedy modified.
On the armature, some motors on the later days used ultrasonic welding, (maybe...
Last post
Interesting to know this kind of stuff. I always wondered about that solder because a good friend of mine when I was younger talked about it being used. Of course I can't hardly remember stuff from a few months ago these days :lol: so all of what...
I've done this few weeks ago. correct me if you see anything wrong here
Reedy_table.png
Last post
Looks good, just bought a new in packet X and A plus a J and D in great condition. The only one I really want now is the M, the one I used against Masami.